SSM60178

Service Bulletin Details

Public Details for: SSM60178

Important firmware update required for the da dongle /da-vina.


- 9999 - 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 - 1995 - 1994 - 1993 - 1992 - 1991 - 1990 - 1989 - 1988 - 1987 - 1986 - 1985 - 1984 - 1983 - 1982 -

Models from 2023
2023 JAGUAR XF
Models from 1996
1996 JAGUAR XJ
Models from 1995
1995 JAGUAR XJ
Models from 1994
1994 JAGUAR XJ
Models from 1993
1993 JAGUAR XJ
Models from 1992
1992 JAGUAR XJ
Models from 1991
1991 JAGUAR XJ
Models from 1990
1990 JAGUAR XJ
Models from 1989
1989 JAGUAR XJ
Models from 1988
1988 JAGUAR XJ
Models from 1987
1987 JAGUAR XJ
Models from 1986
1986 JAGUAR XJ
Models from 1985
1985 JAGUAR XJ
Models from 1984
1984 JAGUAR XJ
Models from 1983
1983 JAGUAR XJ
Models from 1982
1982 JAGUAR XJ
TOPIx - SSM60178 - Important firmware update required for the DA Dongle / DA-VINA
Page 1 of 1
Reference SSM60178
XK / X150
X-TYPE / X400
S-TYPE / X200
XJ / X351
Models
XF / X250
XK-SERIES / X100
XJ / X350
XJ V8 / X308
Important firmware update required for the DA Dongle /
Title
DA-VINA
Category Diagnostic Software Hardware
Last modified 18-Oct-2012 00:00:00
Symptom 000101 Diagnostic Concerns
Title:
Important firmware update required for the DA Dongle /
DA-VINA
IMPORTANT: This information MUST be shared with all
technicians prior to conducting a PDI - Pre Delivery
Inspection procedure on The New Range Rover (L405)
using SDD diagnostic equipment.
Issue:
With the launch of the new Range Rover (L405) Jaguar
Land Rover Service diagnostic’s wishes to advise dealers
that they must update any Diagnostic Associates pass
thru devices "DA Dongle" and "DA-VINA" device firmware
prior to connecting to a L405 to perform any diagnostic
activities.
Solution:
Use the DA Software Update Tool to update the firmware
in the DA Dongle/ DA-VINA to software version 54
(minimum) the following steps Must be carried out in the
order detailed below.
1. Connect the device to the PC via a USB cable; do Not
connect the device to a vehicle.
2. Launch the DA Software Update Tool from the
Content Windows Start / All Programs / Diagnostic Associates
Ltd / DA Software Update Tool
3. Wait unit the application recognises the Device and that
a later version of software is available.
4. Click "Update Device" and wait for the message to be
display in the window to confirm "Your J2534 software is
up to date"
If the DA Software Update Tool has not been installed on
the PC please download and install from
http://www.diagnostic-associates.com/download.htm“DA
Software Update Tool Setup”
NOTE: That the DA Software Update Tool should be
installed on a PC which does not currently have SDD
installed.
For more detailed instructions please refer to the operator
manual supplied with the DA Dongle / DA-VINA, and for
instructions on how to install the DA Software Update
Tool.
If you have any issues accessing the application to
confirm an update isavailableplease contact your Local IT
support to ensure there are no firewall restrictions to the
following address
81.138.17.49 port 80
http://topix.jaguar.jlrint.com/topix/service/archive/221297/index
11/1/2012


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.