0804614-1

Service Bulletin Details

Public Details for: 0804614-1

Power window-vent switch - interim csn repair


- 2014 - 2013 - 2012 - 2011 - 2010 -

NUMBER:
GROUP:
DATE:
08-046-14 REV. A
Electrical
May 16, 2014
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of Chrysler Group LLC.
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-046-14, DATED
MAY 05, 2014, WHICH SHOULD BE REMOVED FROM YOUR FILES. THE REVISION
TO THIS DOCUMENT IS UPDATING THE SUBJECT LINE.
SUBJECT:
Power Window-Vent Switch - Interim CSN Repair
OVERVIEW:
This Bulletin involves disconnecting the switch for the rear power vent window, if requested
by the customer.
MODELS:
2010-2014
(RT)
Town and Country/Grand Caravan
(Left Hand Drive only)
NOTE: This bulletin applies to vehicles built on or after August 25, 2010 (MDH
082500XX) on or before October 31, 2013 (MDH 103122XX) equipped with
Power Quarter Vented Window (sales code JKG) and left hand drive.
SYMPTOM/CONDITION:
A customer may inquire about Safety Recall P25 and request to have their Power Quarter
Vented Window Switch disconnected or a customer may have noticed a burning odor or
have seen smoke coming from the power vented window switch on the drivers door. Once
the proper amount of parts are available, all of the customer will be notified. In the
meantime, the switch can be disconnected, to satisfy the customer.
DIAGNOSIS:
If the customer describes the symptom/condition, perform the Repair Procedure.
REPAIR PROCEDURE:
NOTE: Make sure the Vented Window is closed before disconnecting the switch.
1. Remove the switch from the drivers door arm rest, using a proper trim stick.
08-046-14 REV. A
-2-
Fig. 1 Removing Window Vent Switch
Use the proper trim tool to remove the switch.
2. Disconnect the connector from the switch.
Fig. 2 Unplug Connector from Vent Switch
Green connector
-3-
08-046-14 REV. A
3. Push the connector through the open cavity in the door. Position it so it will not
interfere with the switch when reinstalled.
4. Reinstalled the disconnected switch.
5. Return the vehicle to the customer and advise them they will be notified when the
switch is available.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor
Operation
No:
Description
08-80-98-90 Switch, Rear Power Vent
Window, Disconnected (1 Semi-Skilled).
FAILURE CODE:
ZZ
Service Action
Skill Category
6 - Electrical and Body
Systems
Amount
0.2 Hrs.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.