0804614
Service Bulletin Details
Public Details for: 0804614
This bulletin involves disconnecting the switch for the rear power vent window, if requested by the customer
- 2014 - 2013 - 2012 - 2011 - 2010 -
Models from 2014
2014 CHRYSLER TOWN AND COUNTRY |
Models from 2013
2013 CHRYSLER TOWN AND COUNTRY |
Models from 2012
2012 CHRYSLER TOWN AND COUNTRY |
Models from 2011
2011 CHRYSLER TOWN AND COUNTRY |
Models from 2010
2010 CHRYSLER TOWN AND COUNTRY |
NUMBER: GROUP: DATE: 08-046-14 Electrical May 13, 2014 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of Chrysler Group LLC. SUBJECT: Customer Request Rear Window Vent Switch Disconnected OVERVIEW: This Bulletin involves disconnecting the switch for the rear power vent window, if requested by the customer. MODELS: 2010-2014 (RT) Town and Country/Grand Caravan (Left Hand Drive only) NOTE: This bulletin applies to vehicles built on or after August 25, 2010 (MDH 082500XX) on or before October 31, 2013 (MDH 103122XX) equipped with Power Quarter Vented Window (sales code JKG) and left hand drive. SYMPTOM/CONDITION: A customer may inquire about Safety Recall P25 and request to have their Power Quarter Vented Window Switch disconnected or a customer may have noticed a burning odor or have seen smoke coming from the power vented window switch on the drivers door. Once the proper amount of parts are available, all of the customer will be notified. In the meantime, the switch can be disconnected, to satisfy the customer. DIAGNOSIS: If the customer describes the symptom/condition, perform the Repair Procedure. REPAIR PROCEDURE: NOTE: Make sure the Vented Window is closed before disconnecting the switch. 1. Remove the switch from the drivers door arm rest, using a proper trim stick. 08-046-14 -2- Fig. 1 Removing Window Vent Switch Use the proper trim tool to remove the switch. 2. Disconnect the connector from the switch. Fig. 2 Unplug Connector from Vent Switch Green connector -3- 08-046-14 3. Push the connector through the open cavity in the door. Position it so it will not interfere with the switch when reinstalled. 4. Reinstalled the disconnected switch. 5. Return the vehicle to the customer and advise them they will be notified when the switch is available. POLICY: Reimbursable within the provisions of the warranty. TIME ALLOWANCE: Labor Operation No: Description 08-80-98-90 Switch, Rear Power Vent Window, Disconnected (1 Semi-Skilled). FAILURE CODE: ZZ Service Action Skill Category 6 - Electrical and Body Systems Amount 0.2 Hrs.