TT571302

Tech Tips
Date: March 1, 2013
TT 57-13-02
2000-2013 Vehicles with Flip Key – Key Blade Sticks or Binds
When Opening or Closing
If key blade is found to stick or bind when opening or closing, check position of roll pin that secures key
blade to mechanism. If roll pin is sticking out on either side (as shown below), do not replace key.
Instead, use appropriate sized punch and hammer to drive in the roll pin so that it is flush with edge of
mechanism.
Page 1 of 1
ver1.2
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.