A6623042030471_7

Service Bulletin Details

Public Details for: A6623042030471_7

This bulletin provides information for when the license plate mounting bracket threaded inserts are stripped.


- 9999 - 2025 - 2024 - 2023 - 2022 - 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 -

Models from 9999
9999 AUDI AUDI
Technical Service Bulletin
66 License plate mounting bracket threaded inserts are stripped
66 23 04 2030471/7 November 14, 2023. Supersedes Technical Service Bulletin Group 66 number 21-69 dated
February 9, 2021 for reasons listed below.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
All Audi Vehicles
2012 - 2025
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
7
-
Revised header (Added model years)
6
02/09/2021
Revised header (Added models and model years)
5
03/06/2018
Revised header (Added model years)
Customer states:
• The license plate attachment screws do not install properly.
Technical Background
The license plate brackets are designed to be used with the appropriate-length screw installed by hand with a
screwdriver.
© 2023 Audi of America, Inc.
Internal
Page 1 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Damaged warranty parts have been returned to Audi of
America with evidence of excessive torque used when
installing the screw and/or excessive screw length (Figure
1).
Figure 1. Damaged screw inserts.
Production Solution
Not applicable.
Service
The appropriate screw length is dependent upon the cumulative thickness of the license plate plus any decorative
frame placed over the license plate.
Recommended screw length:
• License plate without decorative frame: M6 x 8 mm.
• License plate WITH 2 mm thick decorative frame: M6 x 10 mm.
Manually install the license plate screws using a handheld screwdriver. If the screw bottoms out, remove this
screw and select a shorter screw instead of applying excessive torque. Otherwise, damage may occur to the
license plate bracket screw inserts. In the event the license plate bracket screw inserts are damaged but the
openings for the inserts in the license plate bracket are not, the license plate bracket screw inserts are available
as a replacement part (WHT 003 200).
Warranty
© 2023 Audi of America, Inc.
Internal
Page 2 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
This damage is due to outside influence and is not covered by any Audi Warranty.
Required Parts and Tools
Part Number
Part Description
Quantity
WHT003200
01 – 04 (as needed)
Nut (M6)
Additional Information
All parts and service references provided in this TSB (2030471) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information. Please check the Repair
Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2023 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2023 Audi of America, Inc.
Internal
Page 3 of 3
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.