B001A
ISO/SAE Reserved
DTC B001A, sometimes indicated as B001A00 is an OBD diagnostic trouble code indicating a generic fault with the vehicle body.
- B001A: ISO/SAE Reserved
- B001A 01: Driver Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
- B001A 02: Driver Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
- B001A 04: Driver Seat Belt Anchor Pretensioner Deployment Loop Open
- B001A 0D: Driver Seat Belt Anchor Pretensioner Deployment Loop High Resistance
- B001A 0E: Driver Seat Belt Anchor Pretensioner Deployment Loop Low Resistance
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- PIE0438 - AIR BAGS
CHEVROLET: This engineering information is requesting information from the field on vehicles that have the condition of driver side seat air bag light on dtc codes B0014, B001A, B001E. - PIE0438A - AIR BAGS
CHEVROLET: This engineering information is requesting information from the field on vehicles that have the condition of driver side seat air bag light on dtc codes B0014, B001A, B001E. - PIC5396A - SEAT BELTS:PRETENSIONER
CHEVROLET: This preliminary information communication provides information to the technician about 2009-2011 impala having diagnostic trouble code B001A, B001B, B0015, or B0022 set in the sensing and diagnostic module. Technician should be advised at - PIC-5641 - SEAT BELTS:FRONT
CHEVROLET: Chevrolet: incorrect definition of codes B0015, B001A, B0022, B001B are displayed for driver and/or passenger pretensioners. *pe updated 5/1/12. *js
2009 CHEVROLET IMPALA with 39838.0 miles
Service air bag light has come on multiple times. Taken into dealer each time, which found the following codes, B001A, B0014, B0020. Dealer found and repaired the following, cpa connector to not be properly installed - r&r connector and installed properly, cpa connector under seat to be out of place - r&r connector and properly installed, found loose cpa connector on pass side seat belt pretensioner - r&r connector and add dielectric, reinstall connector and cpa properly, found program update for related complaint, performed program update on sdm and reset. When speaking to service manager, he said that there maybe a corrosion issue with the connectors within the air bag wiring system.
AIR BAGS,