U110B
U110B
DTC U110B, sometimes indicated as U110B00 is an OBD diagnostic trouble code indicating a manufacturer-specific fault with the vehicle user network.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- A9424772073612_1 - UNKNOWN OR OTHER
AUDI: This pending service solution (pss) requests that technicians enter a record in the pss database in instances where there is a headlight warning in the cluster, and the dtc B126A29, U110B00 is stored in the 09 module. - 2061857.6 - ELECTRICAL SYSTEM
BENTLEY: Headlamp switch - inoperative/not illuminated - dtc U110B00 within 09 - central electrics (bcm1) customer statement: -headlamp switch - inoperative/not illuminated -yellow warning light/message within the dip (adaptive lighting fault) - 2061857.5 - ELECTRICAL SYSTEM
BENTLEY: Headlamp switch - inoperative/not illuminated - dtc U110B00 within 09-central electrics (bcm1) customer statement: -headlamp switch -inoperative/not illuminated workshop findings: -dtc U110B00 within 09-central electrics (bcm1) as shown - 2061857/4 - EXTERIOR LIGHTING
BENTLEY: Headlamp switch - inoperative/not illuminated - dtc U110B00 within 09-central electrics (bcm1). Customer statement / workshop findings: headlamp switch - inoperative/not illuminated workshop findings - dtc U110B00 within 09-central elect - 2061857/3 - EXTERIOR LIGHTING
BENTLEY: Headlamp switch - inoperative/not illuminated - dtc U110B00 within 09-central electrics (bcm1) customer statement: headlamp switch - inoperative/not illuminated workshop findings: dtc U110B00within 09-centralelectrics (bcm1), figure in - 2061857/2 - EXTERIOR LIGHTING
BENTLEY: Headlamp switch - inoperative/not illuminated - dtc U110B00 within 09-central electrics (bcm1). Customer statement: headlamp switch - inoperative/not illuminated workshop findings dtc U110B00 within 09-central electrics (bcm1) as shown i - 2061857/1 - EXTERIOR LIGHTING
BENTLEY: Headlamp switch - inoperative/not illuminated - dtc U110B00 within 09-central electrics (bcm1). Customer statement: headlamp switch - inoperative/not illuminated workshop findings - dtc U110B00 within 09-central electrics (bcm1) as shown - 1803104 - ELECTRICAL SYSTEM
CHRYSLER: Flash: driveability improvements malfunction indicator lamp (mil) diagnostic trouble codes P0116, P0139, P0159, P0197, U110B or U1402. *mj this bulletin supersedes bulletin 18-031-04, dated july 8, 2004. *tt
2006 CHRYSLER SRT8 with 90000.0 miles
The car is randomly bucking, jerking and stalling. I'm getting ridiculous error messages all at the same time including U0100 (lost communication with the ecm/pcm), C121C (torque request denied), U140E (implausible vehicle configuration), C2202 (original vin missing/mismatch), P0700 (tcm malfunction), U0164 (lost communication with heating, venting and cooling), and U110B (lost engine coolant message). All of these error messages came up at the same time after the car jerked, bucked and then stalled. This happens almost every week. This is not related to the stalling due to the faulty gas tank. I had my fuel tank replaced already under that extended lifetime warranty. This seems to be a short circuit somewhere. My best guess is a bad ground or splice point where water might be shorting things out. Many people are having these same problems and getting ripped off by dealers who don't know what the problem is. The dealer will claim to have fixed it (after changing a part or two) because the car will work at that exact moment. A day or two later, the same nonsense ensues. This needs to stop. The car is useless. I can't drive safely more than a couple of miles from my house. Can you imagine that? A car with a limited range of just a few miles?! Please help!!!!
FUEL/PROPULSION SYSTEM, ELECTRICAL SYSTEM POWER TRAIN