Chrysler Cirrus 2000

• Recall 84387 [USA]: If there is a separation of the ball stud from the housing, the driver can loose steering control, possibly resulting in a vehicle crash.
  Federal-mogul is recalling certain replacement control arm assemblies, part numbers k7425, 10945, fa4510x, k7427, 10946, and fa4611x, sold for use on various passenger vehicles listed above. The ball joint on the control arm assembly can fail causing the ball stud to wear through the control arm housing resulting in noise and/or separation of the ball stud from the housing.
  federal-mogul will notify owners of record and replace the affected control arms free of charge. The safety recall began on january 28, 2011. Owners may contact federal-mogul at 1-877-489-6659.
  this recall only pertains to replacement control arm assemblies and has no relation to any original equipment installed on vehicles manufactured by chrysler llc.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 68289 [USA]: Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
  Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. The socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. The subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. The affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. The g10945 and g10946 are the same part as the d10945 and d10946 respectively. They are labeled differently depending on the aftermarket customer.
  qualis automotive will replace the ball joints free of charge. The safety recall began on november 9, 2009. Owners may contact qualis automotive at 1-800-493-4128.
  this recall only pertains to aftermarket ball joints and has no relation to any original equipment installed on vehicles produced by chrysler.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 67082 [USA]: This condition may result in a vehicle fire.
  Import products is recalling 30,351 fuel filters sold to and branded by the affinia group as carquest p/n 86523, napa p/n 3523, and wix p/n 33523 for use as replacement equipment on the vehicles listed above. These filters may develop a leak in the hose assembly and/or connectors due to improperly adhered line connectors.
  the affinia group will notify owners and the filters will be replaced free of charge. The safety recall began on august 1, 2009. Owners may contact wix filter return center at 1-704-869-7411 or import products at 1-508-279-8207.
  this recall only pertains to affinia group aftermarket fuel filters and has no relation to any original equipment installed on the listed passenger vehicles.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 37173 [USA]: Fuel restriction could result in loss of power and/or engine stall, possibly resulting in a vehicle crash.
  Certain tigas fuel pump modules manufactured between june 1 and september 24, 2006, sold under various brand names and p/nos. These fuel pump modules are sold as aftermarket for use in certain daimlerchrysler vehicles listed above. Silicone material used in manufacture of the flapper valve was out-of-specification, leading to excess swell of the flapper valve restricting the flow of fuel to the fuel pump module.
  ti automotive will notify owners and replace the defective fuel pump modules free of charge. The recall began on october 6, 2006. Owners may contact ti automotive toll-free at 1-877-461-1834.
  this recall only pertains to aftermarket fuel pump modules and has no relation to any original equipment installed on vehicles by daimlerchrysler.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 61233 [USA]: Power steering fluid leakage in the presence of an ignition source may result in an underhood fire.
  On certain passenger vehicles equipped with 2.4 liter engines, the high pressure power steering hose may prematurely heat age and develop a leak.
  dealers will replace the high pressure power steering hose free of charge. The the recall began on april 10, 2006. Owners may contact daimlerchrysler at 1-800-853-1403.
  daimlerchrysler recall no. E23.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236(tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 7780 [USA]: In the event of a crash, the child seat may not be properly attached increasing the risk of injury to the child.
  Vehicle description: certain passenger vehicles, pickup trucks and sport utility vehicles fail to comply with the requirements of fmvss no. 225, "child restraint anchorage systems." some of the owner's manuals for these vehicles are missing instructions that provide a step-by-step procedure, including diagrams, for properly attaching a child restraint system's tether strap to the tether anchorage.
  owners will be provided with an addendum to the owner's manuals.
  owner notification began november 12, 2000.Owners who do not receive the free owner's manual addendum within a reasonable time should contact daimlerchrysler at 1-800-853-1403.Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 9411 [USA]: Separation of the stand-off bracket from the block could cause fatigue damage of the right front brake tube and result in a half system brake loss.
  Vehicle description: passenger vehicles. Some of these vehicles may have been built with an inadequate weld between the right front brake hose block and the stand-off bracket.
  dealers will add a brake line bracket to the right front brake tube.
  owner notification began september 25, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-992-1997. Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 5894 [USA]: The paint provides corrosion protection necessary to ensure the straps do not loosen over time.
  Vehicle description: passenger vehicles. The affected vehicles were built with unpainted fuel tank straps.
  dealers will replace the fuel tank straps.
  owner notification began march 20, 2000. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-992-1997. Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 7544 [USA]: The incorrect labels could cause confusion as to whether the childproof safety lock was activated.
  Vehicle description: passenger vehicles. The affected vehicles were built with incorrect child lock instruction labels.
  owners will be provided with correct labels.
  owner notification began march 27, 2000.Owners who do not receive the correct labels within a reasonable time should contact daimlerchrysler at 1-800-992-1997. Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2006003 [Canada]: Steering
  On certain vehicles equipped with a 2.4l engine, the high pressure power steering hose is routed in a high temperature area, which could cause it to age prematurely and develop a leak. Power steering fluid leakage in the presence of an ignition source can result in an under hood fire. Correction: dealers will replace the high pressure power steering hose with an updated part that has increased temperature capability.

  Show Content

• Recall 2000091 [Canada]: Other
  Certain vehicles may have been built with incorrect child lock instruction labels. The incorrect labels direct the user to "pull up to engage" while the correct label reads "push down to engage". The incorrect labels may lead to confusion as to whether the childproof safety lock is activated. If the childproof safety lock is not activated, the door can be opened from inside the vehicle. Correction: correct labels and installation instructions will be mailed directly to owners.

  Show Content

• Recall 2000160 [Canada]: Brakes
  Certain vehicles may have been built with an inadequate weld between the right front brake hose block and the stand-off bracket creating the possibility of separation of the stand-off bracket from the block. This could cause fatigue damage of the right front brake tube and result in a half system brake loss. Correction: a brake line bracket will be added to the right front brake tube.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Power steering fluid fires investigation # EA05019

  Odi has received 29 reports of engine compartment fires that appear to be related to power steering hose leakage in model year (my) 1999 and 2000 chrysler cirrus, dodge stratus and plymouth breeze vehicles (ja-cars) equipped with 2.4l engines.These reports indicate that the fire resulted from a power steering hose leak or that it occurred after an extended drive and shortly after being parked - conditions consistent with ignition of power steering fluid on a hot engine or exhaust surface during the vehicle hot soak period. On january 6, 2006, daimlerchrysler corporation (dcc) notified nhtsa of a safety defect on my 1999 and 2000 ja-cars built from july 1, 1998 to july 31, 2000 and equipped with 2.4l engines (recall 06v-001).The notification stated that ¿the high pressure power steering hose may prematurely heat, age and develop a leak. Power steering fluid leakage in the presence of an ignition source may result in an under hood fire."dcc indicated that it was aware of 94 complaints and field reports that may be related to this condition when it made the defect determination.To remedy the defect condition, dcc will replace the high pressure power steering hose on the affected vehicles with a new part made from a hose material with increased heat resistance capability. Consequently, this investigation is closed.Odi will monitor the effectiveness of the remedy and take further action if warranted.
  

  Show Content

• Engine compartment fires investigation # PE05036

  On june 29, 2005, odi opened preliminary evaluation pe05-036 to investigate complaints of engine compartment fires in model year (my) 1999-2000 chrysler cirrus, dodge stratus and plymouth breeze passenger cars ("ja cars"). The ja cars were introduced in my 1995 and ended with my 2000.They were produced with 2.0l, 2.4l and 2.5l engines.The incident data in the failure report summary of this resume are for subject vehicle engine compartment fires for all causes. According to daimlerchrysler, evidence collected from field inspections of fire incident vehicles indicate that fluid leakage from the high pressure power steering hose is the most likely cause of the fires in the subject vehicles.The subject high pressure power steering hose is used in ja cars with both the 2.4l and 2.0l engines in my 1995 through 2000.The fire incident rate in the my 1999 through 2000 ja vehicles with 2.4l engines is significantly higher than in the prior model year vehicles using that engine and in any of the vehicles with the 2.0l or 2.5l engines.Daimlerchrysler is continuing its investigation of the issue and has provided periodic updates to odi. An engineering analysis (ea05-019) has been opened to further assess the scope and frequency of the alleged defect in the subject vehicles.
  

  Show Content

The contact owns a 2000 chrysler cirrus. The contact stated while driving at various speeds, the steering wheel would shake and the vehicle was difficult to keep in the lane. Additionally, there was an abnormal sound while driving over bumps in the roadway. The vehicle was taken to an independent mechanic who diagnosed that the ball joints were faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 52,000.

On may 31, 2017, i drove my 2000 chrysler cirrus car approx 2 miles to a store and parked in the store lot and then as i went to shut my car off, i saw alot of smoke coming from under my car hood so i shut car off and got out of my car and then lifted my hood and saw that my engine was in engulfed in flames so i immediately shut the hood and started to run away from my car. By then someone who saw all the smoke had called police to the scene and fire trucks came soon after the police arrived and fireman put the fire out. My car had to be towed to dom balducci's car care and was left there for an insurance adjuster to come and inspect the car which he did and after the inspection he claimed my car the 2000 chrysler cirrus as a total loss.

Tl* the contact owns a 2000 chrysler cirrus. The contact stated that after parking, the vehicle failed to restart without warning. The contact mentioned that the failure recurred on several occasions. The vehicle was towed to an independent mechanic where it was diagnosed that the fuel hose fractured and needed to be replaced. The vehicle was repaired but the failure recurred. The manufacturer was not notified of the failure. The failure mileage was 63,000.

Tl* the contact owns a 2000 chrysler cirrus. While driving approximately 20 mph, the steering wheel seized. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 200,000.

Car has been making front end noise for about 4 days before the ball joint breaking completely cause the axle to remove and break also vehicle needs fixed asap call me at [xxx]. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

The lower ball joint is very loose and making alot of noise. There was a recall for lower ball joint failure for this car. Don't understand why my car is not part of the recall. *tr

Ignition locks up, key will not come out of ignition, can't put car in park. Air bag light comes on, when air bag comes on the car wants to die out. Already replaced the ball joints, brake drums, brake lines, brake pads, calipers, rotors, and the oxygen sensors twice. *tr

Tl* the contact owns a 2000 chrysler cirrus. The contact stated that while driving, the vehicle stalled without warning. The vehicle was towed to the contact's residence. The contact was a mechanic and replaced the fuel pump. He also noticed that the fuel line was corroded, rusted, and leaking. The contact was concerned that the component would explode. The vehicle was towed to a repair shop, but was not repaired. The manufacturer was not made aware of the failure. The vin was not unavailable. The current and failure mileage was 170,000.

While driving my son home from school, my 2000 chrysler cirrus became disabled due to the right side ball joint snapping off the control arm. I had to get my veichle towed and had to replace the right ball joint , the right control arm and also the right side axle. I only own this car 6 months ( 1825 miles) and this was the 2nd major repair i had with this veichles steering conponents ( rack & pinion assy and power steering pump). I found on another website that there is a recall for the control arm:lower ball joint recall id #79830 . Can you please help with this problem or lead me in the right direction. Thank you! *tr

Common OBD-II Error Codes

• P361A [1] P361A
• B0000 [1] ISO/SAE Reserved
• P0442 [1] Evaporative Emission Control System Leak Detected (small leak)
• P0455 [1] Evaporative Emission Control System Leak Detected (gross leak)
• P0456 [1] Evaporative Emissions System Small Leak Detected
• P1494 [1] EGRCHK Solenoid Circuit Malfunction