Ford E Series 2001

• Recall 69916 [USA]: In the event of an engine stall, a crash could result without warning.
  On certain heavy duty trucks equipped with 7.3l diesel engines, the camshaft position sensor located on the engine of the vehicle may function intermittently, possibly resulting in an engine stall.
  dealers will inspect the sensor and replace it with an improved camshaft position sensor free of charge. The recall began on december 29, 2007. Owners may contact ford at 1-866-436-7332.
  ford recall no. 07s57.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 64396 [USA]: This overheating condition can cause the running board to melt or cause a fire.
  Certain pickup truck, van, and mini van conversions equipped with southern comfort built running boards that contain certain courtesy lights manufactured by american technology components, inc. These units contain a courtesy light or lights that might overheat when the wire harness is exposed to excessive moisture and road salt.
  dealers will replace the wiring harness on these running boards. Owner notification began march 7, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact southern comfort at 1-800-745-6096.
  customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Spark plug ejection from cylinder head investigation # DP05005

  There is no summary currently available
  

  Show Content

• Tire valve stem investigation # RQ02002

  Allege tire valve stem failure while driving at highway speeds
  

  Show Content

Defective camshaft position sensor. *tr

I have a 2001 ford excursion limited. I was driving my car broke down. I towed it to ford and they said my tie rods were worn out and needed replacement. $1075.00 in payment. Ford stated rods were not a defect but dried out. Replaced rods and ball joints. Could this be true. Other ford owners have never heard of that being a wear and tear. I need help. Please call me 954 2962391.*ak

While braking 50 mph brake warning light illuminated. This caused extended stopping distance. Consumer used the emergency brake to stop the vehicle. Dealership was notifed, but did not resolve the problem.*ak

Steering coupler came loose from streering box. Driver was driving at slow speed so no accident van needed be towed in for repair. *ak

The tv mounted in the raised "sky top" of our elk conversion van, broke loose and fell out of its mount . My wife yelled as she saw the tv falling, and i reached back over my right shoulder to catch the tv before it fell to the floor and exploded into the passenger area with my wife and child. I fortunately was able to exit the hwy. Without an accident, sustaining a sprained shoulder and sore elbow. Other sky tops are also failing at a high rate. There is a new mounting system (fix) but it is only covered within the first 36,000 mi. Time will cause more problems with the older plastic tv mounts.*ak

Front disc brake rotors became warped had to be replaced normal wear on vehicle rotors caused vehicle ta shake violently when applying brakes above 40mph. *ak

The 4 wheel disc brakes stops very poorly, and i am scared that i may hurt somebody. I use the vehicle commercially and can not lemon law it. *jb

Seatbelt retractor on drivers side works approx. 30% of the time.

Common OBD-II Error Codes

• B1876 [3] Seatbelt Driver Pretensioner Circuit Failure
• B1880 [3] Seatbelt Passenger Pretensioner Circuit Failure
• B1915 [3] Air Bag Driver Circuit Failure
• B1920 [3] Air Bag Passenger Circuit Failure
• P0401 [3] Exhaust Gas Recirculation Flow Insufficient Detected
• P0402 [3] Exhaust Gas Recirculation Flow Excessive Detected
• P1400 [3] Glow Plug Monitor Fault (Bank #1)
• P1401 [3] Glow Plug Monitor Fault (Bank #2)
• P0316 [1] Misfire Detected On Startup (First 1000 Revolutions)
• P0442 [1] Evaporative Emission Control System Leak Detected (small leak)
• P0455 [1] Evaporative Emission Control System Leak Detected (gross leak)
• P0456 [1] Evaporative Emissions System Small Leak Detected
• P0457 [1] Evaporative Emission Control System Leak Detected
• P1442 [1] A/C Evaporator Air Temperature Circuit Range/Performance
• P0340 [1] Camshaft Position Sensor Circuit Malfunction (Bank 1)
• P1309 [1] EGR Calibration High
• P1336 [1] Misfire Rate Catalyst Damage Fault - Bank 1
• P1280 [1] Cylinder #4 High To Low Side Open
• P0740 [2] Torque Converter Clutch Circuit Malfunction
• P0741 [2] Torque Converter Clutch Circuit Performance or Stuck Off
• P0743 [2] Torque Converter Clutch Circuit Electrical
• P1744 [1] Slip Solenoid System
• P0171 [3] System too Lean (Bank 1)
• P0172 [2] System too Rich (Bank 1)
• P0174 [3] System too Lean (Bank 2)
• P0175 [2] System too Rich (Bank 2)
• P1635 [1] Internal Vref Malfunction
• P1639 [1] Data Output Link Circuit Failure
• P1105 [1] MAF Sensor Out Of Self Test Range./
• P1106 [1] KOER Not Able To Complete KOER Aborted
• P0500 [1] Vehicle Speed Sensor "A" Malfunction
• P1502 [1] RCNT Solenoid Circuit Malfunction
• U1039 [1] SCP (J1850) Invalid or Missing Data for Primary Id / Vehicle Speed
• C1229 [1] Speed Wheel Sensor Rear Center Coherency Fault
• C1230 [1] Speed Wheel Sensor Rear Center Input Circuit Failure
• C1237 [1] Speed Wheel Rear Input Signal Missing