2016 HINO CONVENTIONAL-TRUCKS-W-JO8Hino Conventional-trucks-w-jo8 2016

Vehicle Details: Service Bulletins

Below you will find all available information on the 2016 HINO CONVENTIONAL-TRUCKS-W-JO8, manufacturered by Hino Motors Canada, Ltd.

ManufacturerKnown WMI(s)Fuel Type
HINO2AY 5PV JHA JHB
HINO VIN Decoder

Use the box here to look up VINs from HINO as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2016 HINO CONVENTIONAL-TRUCKS-W-JO8 produced?
     - The 2016 HINO CONVENTIONAL-TRUCKS-W-JO8 is produced in, Canada.
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • TSB-15-023 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE: A subject vehicle may exhibit an illuminated check engine lamp with dtc (diagnostic trouble code) P2148 and/or P2151. The engine ecu software may falsely detect an issue and record these dtc?S in the engine ecu. Revised engine ecu software
  • TT-16-016 - BRAKES (PWS): Brakes - hydro brake pedal swith - washer. Conventional trucks equipped with hydro-max hydraulic brakes. In 2015, a copper washer was added between the hydro boost push rod clevis and brake pedal in order to maintain minimum clearance. The
  • TT-16-014 - BACK OVER PREVENTION: General - dtc P20B2 coolant cutoff valve diagnostic - most scr (selective catalyst reduction) coolant cutoff valves received through warranty return do not reveal any faults when tested. Please follow the checks outlined below before replac
  • TT-16-013 - EQUIPMENT: Engine - cam housing bolt torque update. The procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before inst
  • TT-16-009 - FUEL SYSTEM, GASOLINE: General - 2011-17 conventional trucks or 2013-17 coe trucks. Current production def injectors contain enhancements including improvements to the aluminum housing. When replacing the def injector, it is necessary to install the complete def
  • TT-16-003 - FUEL SYSTEM, GASOLINE: General - def pump diagnostic tips - supersedes tt-15-025 def pump diagnostic tips conventional trucks equipped with a j05 engine.
  • TT-16-002 - ENGINE (PWS): All hino trucks the purpose of this tech tip is to provide the information that is needed with a techassist case for a engine failure investigation.
  • TT-15-031 - VEHICLE SPEED CONTROL:CRUISE CONTROL: General - conventional trucks (238, 258, 268, or 338) and 2012 - 2016 coe trucks (195, 195h) the tech tip below is to set or change road speed on a hino conventional or coe truck. The below procedure and screen shots were taken from a conve
  • TT-15-013 - EQUIPMENT ADAPTIVE/MOBILITY: Intake and exhaust - conventional trucks (238, 258, 268, or 338) and 2013 - current coe (cab over enginef) trucks. To provide a better determination of a dpf's internal condition, a special service tool (sst) has been developed. An explanat
  • SB-16-034 - LANE DEPARTURE: Coe hydroboost reservoir fluid overflow or aeration - trucks with hydraulic assist brake system. A subject vehicle may exhibit one or more of the following conditions: foaming/aeration of the hydraulic fluid in the hydroboost reservoir tank
  • SB-16-030 - EQUIPMENT: Service manual update - 2015-17 coe trucks troubleshooting information and inspection rpcedure of the dtc P20DE were revised. Correction of workshop manual for hino300 series revision of troubleshooting procedure for the dtc P20DE.
  • SB-16-029 - EQUIPMENT: Service manual update - correction of workshop manual for hino300 series detailed explanation of the fuel pipe installation
  • SB-16-028 - EQUIPMENT: Service manual update - j05c engine change in tightening torque and tightening method of the rocker arm support bolt.
  • SB-16-027 - EQUIPMENT: Service manual update - change in tightening torque and tightening method of the rocker arm support bolt.
  • SB-16-025 - EQUIPMENT: Service manual update - correction of workshop manual for hino300 series correction of clutch learning with relevant model coe trucks with hybrid addition of vehicle condition to confirm at the time of clutch.
  • SB-16-021 - EQUIPMENT: Sevice manual update - correction of workshop manual for hino600 series correction of electrical wiring diagram - conventional trucks 238, 258, 268, 338, 358.
  • SB-16-020 - BRAKES (PWS): Engine - coe trucks (155, 155h, 195, or 195h) an enhanced fuel cut valve is available to address a potential sticking coindition that results in excess residual pressure in the dosing injector (7th injector) supply pipe. A stickingf fuel cu
  • SB-16-019 - BRAKES (PWS): Engine - conventional trucks (238, 258, 268, or 338) an enkhanced fuel cut valve is available to address a potential sticking condition that results in excess residual pressure in the dosing injector (7th injector) supply pipe. A sticking f
  • SB-16-018 - BACK OVER PREVENTION: General - cab over engine trucks 155, 155h, 195, or 195h enhanced software is available for the vcs module to correct false detection of dtc P161F-malfunction of act uator relay, when a low voltage condition is present.
  • SB-16-010 - EQUIPMENT: Correction of workshop manual for 2008-17 correction of the inspection of the dpr filter.
  • SB-16-006 - BRAKES (PWS): Conventional trucks (228, 258, 268, or 338) suspension. Some vehicles built before january 2016 and equipped with a leaf spring rear suspension may experience a dislodged or missing spring pad. As an enhancefment, the rear axle leaf spring
  • SB-16-005 - EQUIPMENT: Correction of workshop manual for hino600 series addition of deta iled explanation of the fuel pipe installation.(service manual update)
  • SB-16-004 - EQUIPMENT: Hino 300 series with hv - correction of workshop manual for hino300 series correction of clutch learning
  • SB-16-002 - BACK OVER PREVENTION: Dcu software update for nox sensor - supersedes sb-15-038 updated 8-1-2016 conventional trucks (238, 258, 268, or 338)
  • SB-16-001 - EQUIPMENT: Correction of workshop manual for hino coe correction of clearance between the front leasf spring bracket pin and bushing - 155, 195, 155h, 195h. Correction of clearance betweeen the front leaff spring bracket pin and leaf spring bushing.
  • SA-16-026 - EQUIPMENT: If a 2013 - 17 coe model 195h is encountered with a will not move in any gear condition and any combination of dtc's P0706, P0756, P0761, P1604, please perform the following for engineering review.
  • SA-16-024 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following service alert is to advise about sb-16-022 (burner atomizer repair procedure) which was released on 08/16/16 and discussed on the techcast webinar. If the atomizer is only leaking fuel, you need to follow sb-16-022 repair proc
  • SA-16-023 - FUEL SYSTEM, GASOLINE: Def injec tor assembly replacement. The following service alert is to advise about the def (diesel exhaust fluid) injector if it's being replaced under warranty. The recent changes made to the def injector include enhancements to the alumi
  • SA-16-017 - ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS:ACCESORY POWER OUTLET/JACK/PORT/USB/SAE/CIGARETTE LIGHTER: An egr reprogramming kit and usb interface have been sent to your dealer prematurely. These items are for an upcoming service campaign that will be released in the near future. A service procedure will follow when it becomes available. Pl
  • SA-16-013 - SERVICE BRAKES, AIR: Several air brake drag concerns on 2016-17 conventional trucks with less than 2,000 miles has been reported. The dragging/smoking brake has been identified either during pdi or shortly after being delivered to the customer. Engineering is c
  • SA-16-003 - BRAKES (PWS): Customer may complain of a loss of air pressure after the vehicle has been sitting parked. Some amount of pressure loss is expected and should be considered normal. Roughly 50% of parking brake valves refturned through warranty do not exhib
  • SB-15-046 - EQUIPMENT: Front spring hanger bolt maintefnance 2016 and earlier hino conventional trucks (238, 258, 268 or 338) that were assembled before 02/029/2015
  • SB-15-044 - EQUIPMENT: Correction of workshop manual for hino conventional revision of troubleshooting procedure for P2214
  • SB-15-043 - EQUIPMENT: Correction of workshop manual for hino conventional revision of troubleshooting procedure for P2201
  • SB-15-042 - EQUIPMENT: Correction of workshop manual for hino conventional revision of troubleshooting procedure for P206B
  • SB-15-041 - EQUIPMENT: Correction of workshop manual for hino conventional revision of troubleshooting procedure for P20EE
  • SB-15-040 - EQUIPMENT: Correction of workshop manual for hino conventional revision of troubleshooting procedure for P207F
  • SB-15-039 - EQUIPMENT: Correction of workshop manual for hino conventional revision of troubleshooting procedure for nox sensor.
  • SB-15-038 - ELECTRICAL SYSTEM:SOFTWARE: Dcu software update for nox sensor superseded by sb-16-002 dated 01-11-2016 conventional trucks (238, 258, 268, or 338)
  • SB-15-037 - EQUIPMENT: Correction of workshop manual for hino600 servies correction of cam height standard value. Hino 238, 258, 268, 338, 358
  • SB-15-036 - EQUIPMENT: Radiator reservoir tank hose replacedment conventional trucks (238, 258, 268, or 338) built between 08/01/2012 and 07/02/2015
  • SB-15-031 - EQUIPMENT ADAPTIVE/MOBILITY: Conventional trucks (238, 258, 268 or 338) and coe (cab over engine) trucks (195, 195h) foreign debris in the def (diesel exhaust fluid) tank may cause the scr (select calalyst reduction) system to malfunction. This can result in dtc's (dia
  • SB-15-028 - EQUIPMENT ADAPTIVE/MOBILITY: Suspension - a coe if equipped with a severe duty body application may experience excessive body roll or poor handling at highway speeds. This tsb (technical service bulletin) outlines an inspection procedure highlighting approved body inst
  • SB-15-025 - ELECTRICAL SYSTEM: In the event that a subject vehicle exhibits a (mil) malfunction indicator lamp and a P0128 (the coolant temperature does not reach a warmed-up temperature) is stored in the engine ecu, enhanced ecu software is available to correct this co
  • SB.15.021 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : The following is to inform you of the above caption. This service data should be attached to the relevant pages of the workshop manuals for maintenance and to use for servicing.. Hino 155, 155h, 195, 238, 258, 268,338, 358
  • SB-15-018 - EQUIPMENT: Correction of workshop manual for 2016, correction of parking brake assembly) the following is to inform you of the above caption. This service data shoiuld be attached to the relevant pages of the workshop manuals for maintenance and to us
  • SA-15-047 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE: A def system equipped truck may come in to the dealer with a coimplaint that the mil is on and dtc P142A is stored in the dcu. This dtc can set when the pump temperature sensor signal is out of the expected range when coimpared to other tem
  • RCB-005-15 - EQUIPMENT: 238, 258, 268, and 338 conventional hino trucks. During ass embly of the front axle, the front axle u-bolts wer potentially over-torqued past the yield strength and could have begun to detorm plastically. The following work procedure provi
  • 15-027 - POWER TRAIN:AUTOMATIC TRANSMISSION: Hino conventional trucks equipped with an allison transmission. The information contained below outlines scenarios that may not account for all configurations and should be utilized as a general guideline to assist in the integration of int
  • AA0Q0 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE: Ecu false P2148/P2151 dtc detection. A subject vehicle may exhibit an illuminated check engine lamp with dtc (diagnostic trouble code) P2148/P2151 (malfunction of injector solenoid valve drive system coimmon 1/2 b+ circuit). The engine ecu
  • 10-001 (2) - WHEELS: Correction to j08e engine workshop manual. Starter assembly mounting nuts torque correction.
  • 167-B1812-03 - EQUIPMENT: Sb-18-034 conventional unification of part number workshop manual correction
  • 167-R1808-01 - ELECTRICAL SYSTEM:SOFTWARE: Conventional ecu, dcu, vcs software conventional ecu, dcu, vcs software update and emission label installation
  • 167-B1808-01 - ENGINE (PWS): Sa-18-012 P0300-series diagnostic
  • 167-B1804-01 - EQUIPMENT: Sb-18-006 the subject vehicle may experience a concern where the starter motor fails to engage due to corrosion that
  • 167-B1803-01 - EQUIPMENT: Sb-17-037 combination meter workshop manual addition. We added a procedure of the trouble shooting of the combination meter.
  • 167-B1702-11 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : All 16my-18my units that have been sold and are in service today will be addressed with a future campaign once the proper agencies have been notified and approval is received.
  • 167-R1702-11 - ELECTRICAL SYSTEM:SOFTWARE: The engine ecu (engine control unit) on all 2016my-2018my trucks contained in dealer inventory need to be reprogrammed prior to delivery. Subject vehicles contain an error in the def monitoring program. To eliminate this situation, it is
  • 167-R1701-11 - ELECTRICAL SYSTEM:SOFTWARE: The engine ecu (engine control unit) on all 2016my-2018my trucks contained in dealer inventory need to be reprogrammed prior to delivery. Subject vehicles contain an error in the def monitoring program. To eliminate this situation, it is
  • 167-T1612-12 - ENGINE (PWS): Tt-16-013 the procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before installing them. The torque specifi
  • 167-T1607-12 - FUEL SYSTEM, GASOLINE: Tt-16-007 the vehicle may exhibit a mil lamp illuminated with dtc's P20DE, P20DF, P0087, or P016F present in the engine ecu due to fuel system contamination. Fuel contamination can be defined as the presence of water, rust, algae, bacteria
  • 167-T1605-12 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Tt-16-003 subject vehicles may exhibit a mil lamp on with reduced engine power due to a fault within the scr (selective catalytic reduction) system. If dtc's (diagnostic trouble codes) related to the def (diesel exhaust fluid) pump set, it
  • 167-T1522-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Tt-15-026 subject vehicles may exhibit a mil lamp on with reduced engine power due to a restriction in the exhaust system such as a plugged dpf. The technician may find dtc?S (diagnostic trouble codes) such as P244B, P141F, P226C, and p029
  • 167-T1521-12 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Tt-15-025 subject vehicles may exhibit a mil lamp on with reduced engine power due to a fault within the scr (selective catalytic reduction) system. If dtc?S (diagnostic trouble codes) related to the def (diesel exhaust fluid) pump set, it
  • 167-T1514-12 - STRUCTURE:BODY: Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
  • 167-T0706-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 07 - 006 voltage drop test
  • 167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
  • 167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
  • 167-B1543-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-15-023 a subject vehicle may exhibit an illuminated check engine lamp with dtc (diagnostic trouble code) P2148 and/or P2151. The engine ecu software may falsely detect an issue and record these dtc?S in the engine ecu. Revised engine ecu
  • 167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
  • 167-B1522-12 - EQUIPMENT:ELECTRICAL: Sb-15-025 in the event that a subject vehicle exhibits a (mil) malfunction indicator lamp and a P0128 (the coolant temperature does not reach a warmed-up temperature) is stored in the engine ecu, enhanced ecu software is available to correc
  • 167-T1701-09 - ELECTRICAL SYSTEM: Sb-17-013 charge air cooler (cac) inspection P0299 P226C -- in the event that a subject vehicle exhibits low power with dtc (diagnostic trouble code) P0299 (underboost) and/or P226C (boost pressure slow response), inspect the cac (charge
  • 167-T1701-03 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Beginning with the 2017 model year, hino changed the standard battery from a group 27 to a group 31. In the event that a group 27 battery must be replaced, it is recommended to use the group 31 as the service replacement for 2014my and newe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.