2015 HINO JHP2Hino Jhp2 2015

Vehicle Details: Service Bulletins

Below you will find all available information on the 2015 HINO JHP2.

ManufacturerKnown WMI(s)Fuel Type
HINO
HINO VIN Decoder

Use the box here to look up VINs from HINO as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • PA-2014-073 - EQUIPMENT: 2015 all-makes marketing and advertising support package
  • 167-T1515-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Tt-15-018 subject vehicles may exhibit intermittent symptoms which include but are not limited to: - abs light - check engine light - vehicle can (controller area network) communication concerns - inoperative speedometer - inoperative
  • 167-T1514-12 - STRUCTURE:BODY: Tt-15-016 the purpose of this publication is to communicate the standard measuring positions on the hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
  • 167-T1513-12 - POWER TRAIN: Tt-15-014 the transmission dtc?S P0974 and P0986, may be found on 12my-15my coe models. There could also be a complaint of low power and erratic shifting. These diagnostic codes may be set due to low voltage between the transmission case an
  • 167-T0706-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : 07 - 006 voltage drop test
  • 167-B1312-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-13-009 this bulletin is to inform dealers and workshops of proper paint codes for all hino models. All models
  • 167-B1632-12 - EQUIPMENT: Sb-16-031 correction of workshop manual for hino300 series revision of troubleshooting procedure for the dtc P20DF
  • 167-B1631-12 - EQUIPMENT: Sb-16-030 correction of workshop manual for hino300 series revision of troubleshooting procedure for the dtc P20DE
  • 167-B1630-12 - FUEL/PROPULSION SYSTEM (PWS): Sb-16-029 correction of workshop manual for hino300 series detailed explanation of the fuel pipe installation
  • 167-B1624-12 - ENGINE (PWS): Sb-16-020 an enhanced fuel cut valve is available to address a potential sticking condition that results in excess residual pressure in the dosing injector (7thinjector) supply pipe. A sticking fuel cut valve may result in the following dt
  • 167-B1622-12 - ELECTRICAL SYSTEM: Sb-16-018 enhanced software is available for the vcs module to correct false detection of dtc P161F -malfunction of actuator relay, when a low voltage condition is present.
  • 167-B1621-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-16-010 correction of the inspection of the dpr filter.
  • 167-T1417-12 - ELECTRICAL SYSTEM:WIRING: Tt-14-018 when disconnecting one of the inline chassis harness connectors on the vehicle, there is potential that the white connector lever may break due to degradation of the white plastic material. In the event that the connector lever d
  • 167-B1615-12 - SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY: Sb-16-002 correction of clearance between the front leaf spring bracket pin and leaf spring bushing.
  • 167-B1614-12 - EQUIPMENT: Sb-16-001 subject vehicles may exhibit a broken dpf shield mounting bracket due to corrosion perforation. An enhanced dpf shield bracket made from stainless steel is now available to prevent this condition from recurring.
  • 167-B1604-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-16-016 enhanced dcu (dosing control unit) software has been released to address the following conditions: illumination of the check engine light. The dcu may falsely detect an issue and record any of the 3 following dtc?S in the dcu. P
  • 167-B1603-12 - EQUIPMENT:ELECTRICAL: Sb-16-008 if dtc(diagnostic trouble code) P0611:fuel injector driver charge circuit - circuit low has set in the engine ecu(electronic control unit) and the workshop manual diagnostic procedure has led to ecu replacement, an enhanced engine
  • 167-B1532-12 - SEATS: Sb-15-035 the following tsb (technical service bulletin) provides replacement instruction for the seat pivot bolts in the event that one or more loose or missing bolts are found on the optional magnetic suspension driver?S seat frame.
  • 167-B1531-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-034 troubleshooting information and inspection procedure of the dtc P0A84 (tc66) were revised.
  • 167-B1528-12 - EQUIPMENT:ELECTRICAL: Sb-15-031 foreign debris in the def (diesel exhaust fluid) tank may cause the scr (selective catalyst reduction) system to malfunction. This can result in dtc?S (diagnostic trouble codes) P20E8 or P20E9 - def pressure abnormality. An inlet
  • 167-B1527-12 - EQUIPMENT:ELECTRICAL: Sb-15-030 on subject vehicles, the mil (malfunction indicator lamp) may illuminate with dtc (diagnostic trouble code) U02A2 stored in the engine ecu. This may be due to a malfunction of the def (diesel exhaust fluid) tank sensor assembly. P
  • 167-B1523-12 - ENGINE AND ENGINE COOLING: Sb-15-026 a subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
  • 167-B1520-12 - EQUIPMENT: Sb-15-020 correction of workshop manual for hino 155, 195, 155h, 195h (revision of troubleshooting procedure for the dtc P0A78 (tc15)
  • 167-B1519-12 - EQUIPMENT: Sb-15-020 correction of workshop manual for hino 155, 195, 155h, 195h (revision of troubleshooting procedure for the dtc P0A78 (tc15)
  • 167-B1515-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Sb-15-016 new parts are available to prevent repeat exhaust manifold stud failures on the j05 engine. This bulletin provides instructions for installing longer manifold studs at the #4 cylinder location.
  • 167-B1512-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-013 correction of workshop manual for 2013my-2015my (hino155, 155h, 195, 195h) (addition of overhaul of the power steering gear)
  • 167-B1511-12 - STEERING: STEERING WHEEL/HANDLE BAR: Sb-15-011 the following tsb (technical service bulletin) outlines the inspection method for steering wheel free play and the adjustment procedure of the steering gear.
  • 167-B1510-12 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Sb-15-010 some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the egr (exhaust gas recirculation) butterfly plate with a repeat P1604 dtc (diagnostic trouble code) stored in the engine ecu. A heated e
  • 167-B1503-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-002 correction of workshop manual for 2013 - 2015my (revision of troubleshooting procedure for the dtc P2123)
  • 167-B1502-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-15-001 correction of workshop manual for hino 155, 195,155h, 195h (revision of troubleshooting procedure for the dtc P0705)
  • 167-B1426-12 - STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS: Sa-14-026 the broken hood grille procedure (sb-14-020) has been revised to reuse the grille nuts (sz17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised p
  • 167-B1423-12 - EQUIPMENT:ELECTRICAL: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-B1422-12 - ENGINE AND ENGINE COOLING: Sa-14-021 this service bulletin involves inspecting the def injector area for coolant leakage, nozzle connectors, shield, lines and side fuel tank (if equipped) for potential damage prior to signing off when receiving hino trucks. The areas
  • 167-B1421-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-14-008 coe hybrid safety equipment, tools and practices
  • 167-B1423-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-14-005 2011my-2015my conventional keyless entry programming
  • 167-B1422-12 - ENGINE AND ENGINE COOLING: Sa-14-021 this service bulletin involves inspecting the def injector area for coolant leakage, nozzle connectors, shield, lines and side fuel tank (if equipped) for potential damage prior to signing off when receiving hino trucks. The areas
  • 167-B1421-12 - EQUIPMENT: Sb-14-008 coe hybrid safety equipment, tools and practices
  • 167-B1411-12 - ELECTRICAL SYSTEM: Sb-14-006 coe diesel and hybrid P1604 code procedure. A subject vehicle may exhibit an illuminated malfunction indicator lamp (mil) on and a code P1604 stored in the transmission control module.
  • 167-B1410-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-14-027 coe hybrid safety practices
  • 167-B1409-12 - SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY: Sb-14-011 when viewing one of the subject vehicles from the front, while it is parked on level ground, the cab may appear to be leaning to the driver?S side. In the event that the cab is leaning to the driver?S side, a work procedure has be
  • 167-B1411-12 - ELECTRICAL SYSTEM:SOFTWARE: Sb-14-006 coe diesel and hybrid P1604 code procedure. A subject vehicle may exhibit an illuminated malfunction indicator lamp (mil) on and a code P1604 stored in the transmission control module.
  • 167-B1410-12 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Sb-14-027 coe hybrid safety practices
  • 167-B1409-12 - STRUCTURE: Sb-14-011 when viewing one of the subject vehicles from the front, while it is parked on level ground, the cab may appear to be leaning to the driver?S side. In the event that the cab is leaning to the driver?S side, a work procedure has be
  • 167-T0610-12 - ELECTRICAL SYSTEM: 06 - 002 no throttle response. Once a burnt out tail lamp filament touches a stop lamp filament, the current goes thru the stop lamp circuit causing the ecu to think that the brakes are applied. Therefore stopping acceleration control.
  • 167-B1422-12 - ENGINE AND ENGINE COOLING: Sa-14-021 this service bulletin involves inspecting the def injector area for coolant leakage, nozzle connectors, shield, lines and side fuel tank (if equipped) for potential damage prior to signing off when receiving hino trucks. The areas
  • 167-R1506-12 - ENGINE (PWS): Aa030 hybrid vehicles may sometimes produce a perceptible level of vibration when the engine is activated. The following procedure provides instruction for replacement of the hv ecu with an enhanced ecu which delays the initial combustion u
  • 167-R1701-03 - ENGINE (PWS): 17my vehicles contain the function to monitor pm sensor performance, however because the threshold for detection logic is not appropriate, the engine ecu may not detect a malfunction of the pm sensor. The following procedure provides direct
  • 167-T1701-03 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Beginning with the 2017 model year, hino changed the standard battery from a group 27 to a group 31. In the event that a group 27 battery must be replaced, it is recommended to use the group 31 as the service replacement for 2014my and newe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.