Honda Cr-v 2000

• Recall 151031 [USA]: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. an underinflated air bag cushion may not properly protect the occupant. these scenarios increase the risk of serious injury or death.
  Honda (american honda motor co.) is recalling certain 1998 acura 2.2cl, 1998-1999 acura 2.3cl, 1998-1999 acura 3.0cl, 2001 acura 3.2cl and acura mdx, 1998-2000 honda accord coupe, accord sedan, civic sedan, odyssey and acura 3.5rl, 1999-2000 acura 3.2tl, 1996-2000 civic coupe, 1997-2000 cr-v, 1997-1998 ev plus, and 1998-1999 isuzu oasis vehicles. These vehicles were equipped with non-azide driver air bag inflators (nadi) and do not contain phase stabilized ammonium nitrate (psan) propellant. Due to a manufacturing issue, the nadi inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
  honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began october 1, 2020. Owners may contact american honda's customer support & campaign center at 1-888-234-2138 or isuzu customer service at 1-800-255-6727.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall R/2019/243 [UK]: Possible air bag inflator rupture
  Passenger air bag may not deploy correctly.
  the inflator inside the passenger?S airbag module is to be replaced.

  Show Content

• Recall 2020015 [Canada]: Airbag
  Issue: on certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Note: this recall is for airbag inflators that may have been installed when the vehicle had the steering wheel airbag replaced. Safety risk: in a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective actions: the company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

  Show Content

• Recall 2020014 [Canada]: Airbag
  Issue: on certain vehicles, exposure to moisture over time could cause the driver-front airbag not to inflate properly in a crash. In some cases, this could cause an airbag not to fully inflate, while in others it could cause it to deploy with more force than normal. It could also cause the inflator to rupture. If the airbag inflator ruptures, small pieces of metal could be propelled toward vehicle occupants or cause damage to the airbag and prevent its proper function. Safety risk: in a crash requiring an airbag deployment, the driver-front airbag may not inflate properly or the inflator could rupture. This could create a risk of injury. Corrective actions: the company will notify owners by mail. There may be a significant delay before replacement parts are available. The company will send you a second letter once replacement parts are available and instruct you to take your vehicle to a dealer to inspect the driver-front airbag inflator. If the inflator requires replacement, a newly design part will be installed.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Tl* takata recall. The contact owns a 2000 honda cr-v. The contact received notification of nhtsa campaign number: 20v026000 (air bags) however, the part to do the recall repair was not yet available. The contact stated that cape girardeau honda located at 385 siemers dr, cape girardeau, mo 63701, (573) 334-6919 had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the issue. The contact had not experienced a failure. Parts distribution disconnect.

Tl* takata recall. The contact owns a 2000 honda cr-v. The contact received notification of nhtsa campaign number: 20v026000 (air bags) however, the part to do the recall repair was not yet available. The contact stated that cape girardeau honda located at 385 siemers dr, cape girardeau, mo 63701, (573) 334-6919 had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the issue. The contact had not experienced a failure. Parts distribution disconnect.

Tl* takata recall. The contact owns a 2000 honda cr-v. The contact received notification of nhtsa campaign number: 20v026000 (air bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Luther hopkins honda (250 5th ave s, hopkins, mn 55343) was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.

Tl* takata recall. The contact owns a 2000 honda cr-v. The contact received notification of nhtsa campaign number: 20v026000 (air bags) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Luther hopkins honda (250 5th ave s, hopkins, mn 55343) was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.

My honda dealer has been unable to replace the defective airbag for more than 150 days from 13 april 2020, when i first asked for a repair appointment. He says the "part is still unavailable." handa sent me nhtsa recall 20v-027 important safety recall notice in march 2020, informing me that the driver front airbag module is defective. In the notice, honda asked for "patience" while they prepared the replacement part. But it has been more than 150 days since i asked for an appointment and more than 180 days since i received the notice. Half a year is too long to leave me driving around in an unsafe vehicle. Please urge honda to get going on making the replacement part! Thank you.

My honda dealer has been unable to replace the defective airbag for more than 150 days from 13 april 2020, when i first asked for a repair appointment. He says the "part is still unavailable." handa sent me nhtsa recall 20v-027 important safety recall notice in march 2020, informing me that the driver front airbag module is defective. In the notice, honda asked for "patience" while they prepared the replacement part. But it has been more than 150 days since i asked for an appointment and more than 180 days since i received the notice. Half a year is too long to leave me driving around in an unsafe vehicle. Please urge honda to get going on making the replacement part! Thank you.

Tl* takata recall. The contact owns a 2000 honda cr-v. The contact received notification of nhtsa campaign number: 20v027000 (air bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer boch honda (279 boston providence hwy #3927, norwood, ma 02062) was contacted and confirmed that parts were not yet available for the recall repair. The manufacturer was made aware of the issue. A case was filed. The contact had not experienced a failure. Vin tool confirms parts not available.

Tl* takata recall. The contact owns a 2000 honda cr-v. The contact received notification of nhtsa campaign number: 20v027000 (air bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer boch honda (279 boston providence hwy #3927, norwood, ma 02062) was contacted and confirmed that parts were not yet available for the recall repair. The manufacturer was made aware of the issue. A case was filed. The contact had not experienced a failure. Vin tool confirms parts not available.

Airbag recall is not being fixed

Common OBD-II Error Codes

• P1456 [1] Evap Emission Control Sys Vent Control Valve Circuit
• P1457 [2] Unable To Bleed - Up Vacuum in Tank
• P1298 [1] Injector High Side Open - Bank 1
• P0301 [1] Cylinder 1 Misfire Detected
• P0302 [1] Cylinder 2 Misfire Detected
• P0303 [1] Cylinder 3 Misfire Detected
• P0304 [1] Cylinder 4 Misfire Detected
• P0172 [1] System too Rich (Bank 1)