Honda Fit Ev 2014

• Recall 156896 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain 2009-2014 acura tsx, 2011-2014 tsx sport wagon, 2010-2013 zdx, 2008-2012 honda accord, 2010-2011 accord crosstour, 2006-2011 civic and civic hybrid, 2008-2010 civic gx ngv, 2012-2015 crosstour, 2007-2011 cr-v, 2009-2013 fit, 2014 fit ev, 2010-2014 insight, and 2009-2015 pilot vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began august 12, 2019. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are f5f and q5e.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 106460 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2007-2011 honda cr-v, 2011-2015 cr-z, 2010-2014 fcx, and insight, 2009-2013 fit, 2013-2014 fit ev, 2007-2014 ridgeline, 2013-2016 acura ilx, 2013-2014 acura ilx hybrid, 2007-2016 rdx, 2005-2012 acura rl, 2009-2014 acura tl, and 2010-2013 acura zdx vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
  honda will notify owners, and dealers will replace the inflator, free of charge. The recall began march 2017. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are jy0, jy1, and jy2.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 2020610 [Canada]: Powertrain
  Issue: on certain vehicles, the paint on the front axle shafts could delaminate or become damaged by road debris. As a result the axle shaft could corrode. If this happens, the axle shafts could break and cause a loss of power to the wheels. Also, if this happens and the vehicle is parked without the parking brake applied, the vehicle could roll away. Safety risk: a loss of power to the wheels or a vehicle rollaway could increase the risk of a crash. Corrective actions: honda will notify owners by mail and instruct you to take your vehicle to a dealer to inspect, and if necessary, replace both axle shafts.

  Show Content

• Recall 2019420 [Canada]: Other
  Issue: this recall is for aftermarket replacement rear window glass produced by vitro automotriz. Certain rear window glass may not have been properly tempered. If the window breaks, the glass may separate into large pieces instead of very small ones. Note: this is a voluntary recall that is not being conducted under the requirements of the motor vehicle safety act. Safety risk: glass that breaks in to large pieces could create a risk of injury. Corrective actions: the company will notify consumers by mail and instruct them to inspect the designation code marked on the rear window glass. Products affected by this recall have the designation “dot 287” along with the lettering “vmr” (replacement market) and a date code that is before july 2019. This information is printed on the bottom corner of the glass. Consumers should contact vitro's customer service at 1-412-995-6457 or [email protected] to arrange for replacement of the glass.

  Show Content

• Recall 2018523 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: dealers will replace the passenger frontal airbag inflator.

  Show Content

• Recall 2016046 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will inspect/replace the driver's frontal airbag inflator. Note: honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844

  Show Content

• Recall 2014178 [Canada]: Powertrain
  On certain vehicles, the passenger side driveshaft could fracture and separate. If this were to occur while the vehicle is being driven, it could result in a loss of motive power. If this were to occur while the vehicle is parked on an incline without the parking brake applied, it could result in unintended vehicle movement. Both situations could increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace affected driveshafts.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Pedestrian alert sounds investigation # DP22005

  Nhtsa received a petition on or about july 18, 2022, requesting that federal motor vehicle safety standard (fmvss) 141 be applied to all electric and hybrid vehicles operating in the united states. The petition can be reviewed at nhtsa.Gov under odi number 11486072.Fmvss 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 kg or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after march 1, 2021.The petitioner asserts that hybrid and electric vehicles to which the standard does not apply should be found to contain a safety defect. In support of the petition, the petitioner includes findings contained in a bill introduced in the house of representatives in 2009, the pedestrian safety enhancement act of 2009, h.R. 734, 111th cong. (2009). A related bill, the pedestrian safety enhancement act of 2010, became law in january 2011 (pub. L. 111-373). The petitioner requests that nhtsa require all electric and hybrid vehicles comply with fmvss 141, regardless of production date.The defect petition has been opened to evaluate the issue and determine whether to grant or deny the petition.The associated product list is not exhaustive and may contain vehicles that are equipped with pedestrian alert sounds.
  

  Show Content

• Air bag acu electrical overstress investigation # EA19001

  The office of defects investigation (odi) is expanding the investigation to include the equipment supplier and vehicle manufacturers (oems) using this unit.The investigation focuses on acus manufactured by trw, now zf-trw (zf) , the tier-one supplier to hyundai and kia and the other affected oems.The acu senses a vehicle crash to determine whether air bag deployment is required, and if so, deploys the appropriate air bags and other supplemental restraints.Zf supplied subject acus to six oems: fca, honda, hyundai, kia, mitsubishi and toyota.Internal to the acu is an electronic component (an application specific integrated circuit, or asic) that monitors signals from crash sensors.A failure of the asic may prevent deployment of the required air bags and devices, or may otherwise affect the proper operation of the acu.The acu is located in the passenger compartment, and electrical wiring connects the asic to sensors located at the front of the vehicle.Odi’s current understanding is that a crash event may, in and of itself, produce harmful signals on the sensor wiring capable of damaging the asic, although the probability of this occurring appears to be low.While the acu incorporates electrical circuitry intended to protect the asic from harmful signals, the level and effectiveness of the protective circuitry varies by oem customer.During pe18-003, hyundai and kia filed recalls (18v-137 and 18v-363 respectively) to address a defect that could result in acu disablement and non-deployments.According to the filings, the disablement occurs in certain types of frontal crash events.Both filings discussed a condition known as electrical overstress (eos) that affected the subject asic and was likely caused by electrical signals that entered the acu via sensor wiring.The recalled vehicles used acus that had the lowest levels of asic protection while non-recalled hyundai and kia products using subject acus had higher levels of protection.Odi has not identified any eos failures in the non-recalled kia and hyundai populations.In september 2016, fca filed recall 16v-668 for certain model year (my) 2010 to 2014 chrysler, dodge and jeep products also manufactured with the subject acu.In that filing, fca also discussed an eos condition that resulted in a failure of the subject asic, which caused air bag non-deployment. Fca noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle.Other fca vehicles that also used the subject acu, but not the cross-car harnessing, had not experienced eos failures, despite similar time in service. The recalled fca vehicles used a mid-level form of asic protection.Other fca vehicles that did not use cross car wiring, or used higher levels of asic protection, have not been recalled.Odi has not identified any eos failures in the non-recalled fca population.Recently, odi has identified two substantial frontal crash events (one fatal) involving toyota products where eos is suspected as the likely cause of the non-deployments.The crashes involved a my 2018 and a my 2019 corolla equipped with the subject acu that incorporated higher levels of asic protection.Additionally, both acus were found to be non-communicative (meaning the acu could not be read with an event data recorder) after the crash, a condition found in other cases where eos occurred with other oems.No other eos events have been identified for other toyota products (including corolla models that used the subject acu since my 2011), or for the honda and mitsubishi vehicles that use the subject acu.Odi plans to evaluate the susceptibility of the subject acu designs to electrical signals, as well as other vehicle factors that can either lead to, or reduce the likelihood of, an eos event.Additionally, odi will evaluate whether an unreasonable risk exists that requires further field action.
  

  Show Content