2013 MAZDA Mazdaspeed3Mazda Mazdaspeed3 2013

Vehicle Details: Recalls, Consumer Complaints, Service Bulletins

Below you will find all available information on the 2013 MAZDA Mazdaspeed3.
The vehicle is described as a Mid-size.

ManufacturerKnown WMI(s)Fuel Type
MAZDAPremium Gasoline
MAZDA VIN Decoder

Use the box here to look up VINs from MAZDA as well as other manufacturers

#
Frequently Asked Questions
  • What is the MPG of a 2013 MAZDA Mazdaspeed3?
     - The 2013 MAZDA Mazdaspeed3 has an EPA estimated city efficiency of 9.5 MPG and an estimated highway efficiency of MPG.
  • What is the annual fuel cost for the 2013 MAZDA Mazdaspeed3?
     - EPA estimated annual fuel cost for the 2013 MAZDA Mazdaspeed3 is $2508.
  • Are there recalls for the 2013 MAZDA Mazdaspeed3?
     - There are 2 recall(s) for the 2013 MAZDA Mazdaspeed3, additional information is below.
Available Engine & Drive Classes
  • 2.3L 4 cylinder 6-speed manual
NHTSA Mandated Recalls

  • Recall 122606 [USA]: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.

  • Recall 2016431 [Canada]: Structure

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 09-016-23 - ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER: Speedometer replacement procedure
  • 0901316 - ELECTRICAL SYSTEM:ADAS:BLINDSPOT:WARNING:LAMP: Excessive condensation or water within the headlamp assembly caustion
  • 0900916 - ELECTRICAL SYSTEM: Handsfree bluetooth module and/or text messaging troubleshooting procedure
  • 0100216 - ENGINE AND ENGINE COOLING: Premixed long life "fl22" engine coolant
  • 09-025-21-3824 - EQUIPMENT: This service bulletin provides information regarding the proper use of the driver??A?A?S floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided w
  • 01-006-21-3779 - ELECTRICAL SYSTEM: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in sto
  • 01-005-21-3778 - ELECTRICAL SYSTEM: The mazda dca-8000pm is required for all warranty battery testing. If the mazda dca-8000pm is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this service bulletin to t
  • 09-002-21-3770 - ELECTRICAL SYSTEM: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer
  • 07-001-21-3775 - EQUIPMENT: A musty/mildew type odor may come from the vents when the air conditioning (a/c) system is operating. It is most noticeable when the a/c is first turned on. This odor is the result of mold growth in the a/c evaporator/cooling unit which is
  • 00-001-21-3768 - STEERING: Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manu
  • MT-002-20 - TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS: New carb regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including mazda dealerships) in california effective september 1, 2010.
  • 09-006-20-3673a - EQUIPMENT: When encountering a vehicle with paint damage, refer to the "mazda paint warranty guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
  • 09-003-20-3671 - EQUIPMENT: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer. Note: tampering with a motor vehicle odometer is strictly prohibited by federal, and state laws. It is the dealerâ¿¿s responsibility
  • 00-003-19-3583 - FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY: In support of the new mrt distribution, mazda will ship to dealers a new dual purpose diagnostic leak detector beginning march, 2019. Training videos will be posted to mgss shortly and workshop manual procedures will be revised gradually.
  • SA-061-17 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: In an effort to achieve a higher level of customer experience and retain the value of mazda's vehicles, mnao warranty operations is? 2017 mazda north american operations, u.S.A. Allowing all mazda dealers to utilize a third party, specmo en
  • SA-050-17 - STRUCTURE:BODY:HATCHBACK/LIFTGATE: Caution: at no point during the repair for recall 9916h (liftgate stay damper safety recall) should "vise-grips" or other similar tools be used to hold the lift gate stay dampers. Use only the tools specified in the recall. Vice grips or ot
  • 09-025-14-2925A - EQUIPMENT: Some vehicles may exhibit a cracking noise originated at the positioning pins near the top corners of the wind-shield and/or rear window when driving on uneven road surface. This happens when the ambient temperature is approximately 14 f (
  • 09-034-14-2956 - EQUIPMENT ADAPTIVE/MOBILITY: In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.Note:mazda vehicles are manufactured with tamper-proof speedometers.When a speedometer is replaced, the new speedometer will read zero
  • 01-015-14-2929 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Some vehicles may experience the check engine light on with dtc P0300:00 (random misfire detected) stored in memory. The vehicle can run normal without any driveabilty or nvh concern.This is caused by improper programming of the pcm. To cor
  • 04-002-14-2879 - SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT: Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of th
  • 09-028-12-2701B - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: The multi information display (mid) and navigation system support for diagnostics, parts authorization, and parts exchange require contacting the proper source. Please contact the appropriate source by referring to the following tables.
  • 02-008-13-2811 - EQUIPMENT: Some vehicles may exhibit a squeaking or knocking noise from the rear of the vehicle when passing over a bump. This is caused by dust entering between the rear stabilizer bushing and stabilizer bar, which wears down the bushing. To correct
Vehicle Documentation
[pdf] Confidentiality Request Letter
ACCENTS INTERIOR JustAnswer GENUINE 1999 2005 Silver Black Design 5 Speed Manual Transmission N101 V8 170F 22 6 N102 Wood NC10 NARDI® 2001 Y603 17 520A RX 8 2004 2011 Leather With Rotary Emblem Automatic For Vehicles Only   V Kit 3 500 lb rating See owner s manual for tow details Includes relays trailer lighting function 2013 01 011625 remote start ww2 justanswer MA mazdamaster577 secure
GENUINE ACCESSORIES Full Catalog Table of Contents INTERIOR Page Accents Bezels: Interior, Bezels: Interior, Dash Kit, Door Grip Covers, Door Switch Decorative Panel, Gearshift Knob, Gearshift Knob Cover, Instrument Panel Decorative Trim, Parking Brake Cover, Parking Brake Handle, Pedals Acce...
lang:de score:30 filesize: 758.57 K page_count: 192 document date: 2013-01-02
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20171108

The swing arm that attaches the driver's seat to the left-side seat runner unexpectedly detached. Close inspection revealed that this was caused by a weld failure / metal fatigue at the point where the arm was welded to the rod that runs below the cushion. The seat is now unstable and rocks in an alarming way, both when accelerating and decelerating. Copied from an existing complaint for the 2010 model year because it is the exact same problem

CrashNoY 2 InjuredNone20170709

Driver seat collapses backwards when rear-ended while stationary on interstate and remains fully reclined after collision. Attempts to retract the seat into normal driving position is unsuccessful as the seat no longer locks into position. The only position where the seat locks into place is in the fully reclined position.

NoNoN NoneNone20160831

Summary: insufficient corrosion protective coating was applied to the ends of the external cylinders of the rear hatch/lift gate gas stay dampers (lift supports). If water containing road salt enters, it can cause corrosion. Over time, increased corrosion may eventually cause it to break as the rear hatch or lift gate is opened. Safety risk: the rear hatch or lift gate may drop suddenly, and/or the broken parts may hit the customer, causing injury.

Common OBD-II Error Codes
  • P0300 [1] Random/Multiple Cylinder Misfire Detected
For a complete list of all consumer complaints and OBD II codes, see the Complaints page

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.