Pierce Impel 2013
Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins
Below you will find all available information on the 2013 PIERCE Impel.
The vehicle is described as a Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.).
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
PIERCE | Diesel |
Use the box here to look up VINs from PIERCE as well as other manufacturers
-
Where is the 2013 PIERCE Impel produced?
- The 2013 PIERCE Impel is produced in Appleton Wisconsin, United States (usa).
-
Are there recalls for the 2013 PIERCE Impel?
- There are 11 recall(s) for the 2013 PIERCE Impel, additional information is below.
-
What is the GVWR of a 2013 PIERCE Impel?
- The 2013 PIERCE Impel has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
-
How much horsepower does the 2013 PIERCE Impel have?
- The 2013 PIERCE Impel has 310 horsepower.
Recall 138692 [USA]: If the aerial device moves in an unexpected direction, the ladder may contact an object, such as a building or an electrical wire, increasing the risk of injury.
Recall 129140 [USA]: If the bracket falls, it could strike a person below.
Recall 115000 [USA]: An unexpected surge in water pressure to the fire hose can increase the risk of injury to the hose operator or those nearby.
Recall 106999 [USA]: If one of the lower control arm fractures, the attached wheel may separate, increasing the risk of a crash.
Recall 103218 [USA]: If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
Recall 99059 [USA]: The absence of trailer turn signals may confuse other drivers, increasing the risk of a crash.
Recall 96295 [USA]: In the event of a crash, the weak springs may allow the door to open and possibly fail to contain emergency personnel or equipment, increasing the risk of injury.
Recall 2020240 [Canada]: Structure
Recall 2020239 [Canada]: Structure
Recall 2015005 [Canada]: Suspension
Recall 2013167 [Canada]: Other
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- PB_560.2 - EQUIPMENT: Replacement step options for discontinued power steps on impel/velocitya?? Chassis.
- SB_588.4 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: Addressing fault codes and upgrades to the midwest climate control (mcc) hvac system.
- PB_560 - STRUCTURE:BODY:TAILGATE:INTEGRATED STEPS: Replacement step options for discontinued power steps on impel/velocitya?? Chassis.
- PB_560 - STRUCTURE: Replacement step options for discontinued power steps on impel/velocitya?? Chassis.
- SB_588 - VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM: Addressing fault codes and upgrades to the mcc hvac system.
- PB_560 - STRUCTURE: Replacement step options for discontinued power steps on impel/velocitya?? Chassis.
- PB_560 - STRUCTURE: Replacement step options for discontinued power steps on impel/velocitya?? Chassis.
- Service Bulletin - EXTERIOR LIGHTING:HEADLIGHTS:BULBS: Led headlight part numbers and install instructions
- Dealer Notificat - EQUIPMENT: Field update notice #74b253 hercules cafs hydraulic hose. Pierce has ddetermined some vehicles built with the hercules cafs m;ay have had an incorrect hydraulic hose installed.
- Dealer Letter - - SEAT BELTS:FRONT:BUCKLE ASSEMBLY: Vehicle safety recall dealer notification - important - recall 14v-243 - immi l9 seat belt buckle.
- Dealer Letter - - SUSPENSION: Recall - notice: 14v-660-tak-4 lower control arm vehicle safety recall dealer nofication-important. Pierce manugacturing has determined that a defect which relates to motor vehicle safety exists in certain impel, quantum, velocity, and arro
- SB-333 - SEAT BELTS:REAR/OTHER:BUCKLE ASSEMBLY: Pierce: the female buckle and belt tongue has been upgraded to a new combination l9, that provides more strain relief for wiring in stalk, and shoulder belt system has a new ready reach d-loop assembly on certain models. Models velocity,
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Cab Type | Crew/Super Crew/Crew Max |
Body Class | Fire Apparatus |
DisplacementCC | 8900.0 |
DisplacementCI | 543.11132244311 |
DisplacementL | 8.9 |
Engine Configuration | In-Line |
Engine Cycles | 4 |
Engine Cylinders | 6 |
EngineHP | 310 |
EngineHP_to | 425 |
EngineKW | 231.1670 |
Engine Manufacturer | Cummins |
Engine Model | ISL |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
Fuel Type Primary | Diesel |
GVWR | Class 8: 33,001 lb and above (14,969 kg and above) |
Make | PIERCE MANUFACTURING |
MakeID | 560 |
Manufacturer | PIERCE MANUFACTURING INC. |
Manufacturer Id | 1124 |
Model | Impel |
ModelID | 2877 |
Model Year | 2013 |
NCSA Body Type | Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.) |
NCSA Make | Other Make |
NCSA Model | Medium/Heavy – COE low entry |
Plant City | APPLETON |
Plant Country | UNITED STATES (USA) |
Plant State | WISCONSIN |
Series | Fire Truck |
VIN | 4P1CJ01A7DA013692 |
Vehicle Descriptor | 4P1CJ01A*DA |
Vehicle Type | TRUCK |
VIN | Year | Model | Manufactured In |
---|---|---|---|
4P1CJ01A7DA013692 | 2013 | Impel | APPLETON WISCONSIN, UNITED STATES (USA) |