TSB-SST033

GROUP
SST
MODEL
Optima (QF/TF)
Sorento (XM)
Cadenza (VG)
Soul (AM/PS)
Sportage (SL)
NUMBER
033
DATE
April 2014
TECHNICAL SERVICE BULLETIN
SPECIAL SERVICE TOOL FOR HOOD RELEASE
LEVER REMOVAL
SUBJECT:
This bulletin provides information related to the introduction of a new Special Service Tool
(SST) (A) developed to prevent the hood release lever pivot point (B) from being damaged
when removing the hood release lever. Follow the instructions included in this bulletin to
properly remove the hood release lever using the new SST.
A
B
 NOTICE
One SST will be shipped to every dealer free of charge. Additional tools can be
ordered through Snap-on (see page 2). Make sure this tool is available to
technicians whenever removal of the hood release lever is required.
File Under: Special Service Tool
Circulate To:
X General Manager

X Service Advisors

X Technicians

X Service Manager


X Parts Manager
X Body Shop Manager 

X Fleet Repair
Page 2
SUBJECT:
SPECIAL SERVICE TOOL FOR HOOD RELEASE
LEVER REMOVAL
SERVICE PROCEDURE:
1.
Insert the SST into the hole on the
hood release lever, as shown.
2.
While applying slight inward pressure
to the end of the SST, use a plastic
prying tool to remove the hood release
lever.
3.
To reinstall, place the hood release
lever on the pivot point and gently snap
it in place.
REQUIRED SPECIAL TOOLS:
Tool Name
Hood Release Lever Tool
Part Number
Comments
07120-11000
Additional tools can be
ordered through Snap-on
Equipment Solutions at
(888) 542-1011
TSB: SST 033 Hood Release Lever Tool April 2014