NTB16-112a

Classification:
Reference:
HA16-004a
Date:
NTB16-112a
July 12, 2017
2013-2017 ALTIMA; A/C DOES NOT BLOW COLD
AND CLUTCH DOES NOT ENGAGE
This bulletin has been amended. The Title and APPLIED VEHICLES section have been revised.
No other changes have been made. Please discard previous versions of this bulletin.
APPLIED VEHICLES: 2013-2017 Altima Sedan (L33)
IF YOU CONFIRM
The air conditioner does not blow cold air,
Magnet
clutch
AND
The magnet clutch is determined to be the
cause when following the diagnosis
procedure in the HAC section of the
Electronic Service Manual (ESM).
Magnet coil
Figure 1
ACTION
Replace the magnet coil.

Refer to SERVICE PROCEDURE on page 3.
NOTE: Do NOT discharge the refrigerant or remove the A/C compressor for this
procedure.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/4
Required Tools
Drive Plate Installer J-38873-A
Figure 2
NOTE: The tools in Figure 2 are used to install the A/C compressor clutch pulley assembly
and the clutch disc.
Clutch tool J-52173-R1
Figure 3
NOTE: The tool in Figure 3 is used to prevent the clutch disc from rotating while the clutch
disc bolt is being removed/installed.
2/4
NTB16-112a
SERVICE PROCEDURE
Magnet Coil Replacement
1. Replace the CLUTCH COIL ASSY-COMPRESSOR (magnet coil).

Refer to the Electronic Service manual (ESM), section HA – Heater & Air
Conditioning System for replacement information.

See page 2 for required tools.
IMPORTANT:
 The magnet coil for the applied vehicles is retained by a single snap ring as shown
in Figure 4.
 Figure 5 (and illustrated in the ESM) is incorrect for the applied vehicles. The
magnet coil is not attached by three bolts.
Bolts
Snap ring
Figure 4
Figure 5
NOTE: The magnet coil, snap rings and bolt come with the CLUTCH COIL ASSYCOMPRESSOR (see PARTS INFORMATION).

Do NOT reuse the bolt or snap rings.
3/4
NTB16-112a
PARTS INFORMATION
MODEL
Altima Sedan with
QR25DE 4-cyl engine
Altima Sedan with
VQ35DE 6-cyl engine
DESCRIPTION
PART NUMBER
QUANTITY
CLUTCH COIL ASSYCOMPRESSOR (1)
(Magnet Coil)
92661-9NB0C
1
(1) Includes magnet coil, clutch disc bolt, and snap rings for both coil and pulley.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE SYM DIA FRT
RPL MAGNETIC CLUTCH ASS'Y
(1)
TD20AA
ZE
32
(2)
(1) Reference the Parts Information table and use the Part Number as the PFP.
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated FRT.
4/4
NTB16-112a