TT 32-14-01
Service Bulletin Details
Public Details for: TT 32-14-01
Tech tips (torque converter/flywheel/flexplate installation): incorrect torque converter or flywheel/flexplate installation can result in transmission damage. When installing an engine, flywheel or transmission, please follow the installat
- 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 -
Models from 2015
Models from 2014
Models from 2013
Models from 2012
Models from 2011
Models from 2010
Models from 2009
Models from 2008
Models from 2007
Models from 2006
2006 VOLKSWAGEN BEETLE |
2006 VOLKSWAGEN EOS |
2006 VOLKSWAGEN GOLF |
2006 VOLKSWAGEN GTI |
2006 VOLKSWAGEN JETTA |
2006 VOLKSWAGEN PASSAT |
2006 VOLKSWAGEN PHAETON |
2006 VOLKSWAGEN RABBIT |
2006 VOLKSWAGEN TOUAREG |
Models from 2005
2005 VOLKSWAGEN BEETLE |
2005 VOLKSWAGEN GOLF |
2005 VOLKSWAGEN JETTA |
2005 VOLKSWAGEN PASSAT |
2005 VOLKSWAGEN PHAETON |
2005 VOLKSWAGEN TOUAREG |
Models from 2004
2004 VOLKSWAGEN BEETLE |
2004 VOLKSWAGEN EUROVAN |
2004 VOLKSWAGEN GOLF |
2004 VOLKSWAGEN JETTA |
2004 VOLKSWAGEN PASSAT |
2004 VOLKSWAGEN PHAETON |
2004 VOLKSWAGEN TOUAREG |
Models from 2003
2003 VOLKSWAGEN BEETLE |
2003 VOLKSWAGEN EUROVAN |
2003 VOLKSWAGEN GOLF |
2003 VOLKSWAGEN JETTA |
2003 VOLKSWAGEN PASSAT |
2003 VOLKSWAGEN TOUAREG |
Models from 2002
2002 VOLKSWAGEN BEETLE |
2002 VOLKSWAGEN CABRIO |
2002 VOLKSWAGEN EUROVAN |
2002 VOLKSWAGEN GOLF |
2002 VOLKSWAGEN JETTA |
2002 VOLKSWAGEN PASSAT |
Models from 2001
2001 VOLKSWAGEN BEETLE |
2001 VOLKSWAGEN CABRIO |
2001 VOLKSWAGEN EUROVAN |
2001 VOLKSWAGEN GOLF |
2001 VOLKSWAGEN JETTA |
2001 VOLKSWAGEN PASSAT |
Models from 2000
2000 VOLKSWAGEN BEETLE |
2000 VOLKSWAGEN CABRIO |
2000 VOLKSWAGEN EUROVAN |
2000 VOLKSWAGEN GOLF |
2000 VOLKSWAGEN JETTA |
2000 VOLKSWAGEN PASSAT |
Tech Tips Date: July 4, 2014 TT 32-14-01 All models 2000-2015 (except Routan) – Torque Converter/Flywheel/Flexplate installation Incorrect torque converter or flywheel/flexplate installation can result in transmission damage. When installing an engine, flywheel or transmission, please follow the installation procedures outlined in ELSA. For the flywheel/flexplate, please be certain the correct shim is installed between it and the crankshaft (reference VWIQ120). When installing a torque converter, press the torque converter hub through the seal as far as the first stop. Turn the torque converter while pushing toward the transmission using light force, until the cut outs in the torque converter hub lock into the pump wheel plate. The torque converter slides in. The torque converter is installed correctly if it is easy to turn by hand and if it fits evenly in the transmission bell housing. Additionally, it should spin freely when the transmission bell housing bolts are torqued to the engine block, prior to installation of the flywheel to converter bolts (reference VWIQ121). Page 1 of 1 ver1.2 © 2014 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.