TT 90-11-10

Tech Tips
Date: October 7, 2011
TT 90-11-10
2006-2015 Vehicles – Instrument Cluster Production Mode
July 10, 2015: Update to Model Year Applicability.
During PDI, or after installation of a replacement cluster, “Pro” may be displayed in place of the odometer.
The high beam indicator may be flashing in the instrument cluster as well. This indicates the cluster is in
Production mode. Production mode is not the same as “Transport” mode.
To remove Production mode go into VSD>Address 17 – Instrument Cluster>Adaptation>Select either
channel 22 if available, or the listing for Production Mode. Toggle Production mode ‘OFF”>save and
accept>back out of address 17. Cycle the key and check the cluster display.
Page 1 of 1
ver1.2
© 2015 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.