FSB 215-002

Service Bulletin Details

Public Details for: FSB 215-002

Timing plate leak repair


- 9999 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 - 2002 - 2001 - 2000 - 1999 - 1998 - 1997 - 1996 - 1995 - 1994 -

Models from 2018
2018 VOLVO VN
Models from 2017
2017 VOLVO VN
Models from 2000
2000 VOLVO VN
Models from 1999
1999 VOLVO VN
Models from 1998
1998 VOLVO VN
Models from 1997
1997 VOLVO VN
Models from 1996
1996 VOLVO VN
Models from 1995
1995 VOLVO VN
Models from 1994
1994 VOLVO VN
Field Service Bulletin
Trucks
Volvo Trucks North America
Greensboro, NC USA
Date
This Field Service Bulletin replaces bulletin FSB 215-002
dated 5.2015.
5.2015
Group
No.
Release
215 002 02
Page
1(2)
Timing Plate Leak Repair
D16
VN, VT
FSB 215-002, Timing Plate Leak Repair
(May 2015)
Information
Oil leaks have been observed coming from the area that is at the rear of the engine, just
under the lip of the valve cover, on the right side (exhaust side). It is typically seen as
seeping, weeping, leaking oil and could be believed to be from the cylinder head gasket.
Deeper investigation has found that the bolts (highlighted in the images below) that fasten the
timing plate to the cylinder head are coming loose, which breaks the silicone seal and will
allow oil to start leaking. This issue is only applicable to D16 engine serial numbers prior to
80059.
W2098874
Service personnel: Please circulate, read and initial
Service
Manager
Warranty
Administrator
PV729-FSB215-002_V
Workshop
Foreman
Service Technicians
USA71026
Volvo Trucks North America
Field Service Bulletin
Date
5.2015
Group
No.
Release
215
002
02
W2005981
Note: Numbers in image indicate tightening sequence.
The repair for this requires gaining access to the rear of the engine block. Refer to the
appropriate service information in Impact. It may be necessary to replace the timing plate if
the plate is fretted severely. Thoroughly clean the block, fasteners and fastener holes.
Replace all 25 M8*25 timing plate screws with part number 994447 which have pre-applied
locking compound (patch-lock).
Page
2(2)


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.