SSM 47265
Service Bulletin Details
Public Details for: SSM 47265
Some ford and lincoln vehicles equipped with a 2.7l or 3.0l ecoboost engines may exhibit an oil leak from the engine oil pan rtv seal. Replace the oil pan by performing the published workshop manual (wsm) service procedures. After removing
- 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2018
2018 FORD F-150 |
2018 FORD FUSION |
2018 LINCOLN CONTINENTAL |
2018 LINCOLN MKX |
2018 LINCOLN MKZ |
Models from 2017
2017 FORD EDGE |
2017 FORD F-150 |
2017 FORD FUSION |
2017 LINCOLN CONTINENTAL |
2017 LINCOLN MKX |
2017 LINCOLN MKZ |
Models from 2016
2016 FORD EDGE |
2016 FORD F-150 |
2016 LINCOLN MKX |
Models from 2015
2015 FORD EDGE |
2015 FORD F-150 |
Models from 2014
2014 FORD EDGE |
SSM 47265 Some Ford and Lincoln vehicles equipped with a 2.7L or 3.0L EcoBoost engines may exhibit an oil leak from the engine oil pan RTV seal. Replace the oil pan by performing the published Workshop Manual (WSM) service procedures. After removing the oil pan, it is suggested to allow the crankcase to drain overnight to minimize the chance of residual oil contaminating the crankcase sealing rail. Remove all traces of old RTV, clean the engine sealing surface with only Motorcraftù Metal Brake Parts Cleaner then wipe with Motorcraftù Metal Surface Prep Wipes, and allow to air dry as directed in WSM, Section 303-00, RTV Sealing Surface Cleaning and Preparation. If possible, after the new oil pan is installed, allow the new RTV sealant to cure for 4 hours before refilling the engine with oil. Ford is investigating this concern. Monitor OASIS for future updates.