01-08-51-003E
Service Bulletin Details
Public Details for: 01-08-51-003E
This informational bulletin provides recommendations and product information for application of anti-corrosion materials
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2016
Models from 2015
Models from 2014
Models from 2013
Models from 2012
Models from 2011
Models from 2010
Models from 2009
Models from 2008
Models from 2007
Bulletin No.: 01-08-51-003E Date: Jul-2015 Subject: Application of Anti-Corrosion Materials Models: 2016 and Prior GM Passenger Cars and Trucks Attention: This Bulletin also applies to any of the above models that may be Export vehicles. This bulletin has been revised to add the 2015-2016 model years and update the products information. Please discard Corporate Bulletin Number♦01-08-51-003D. After a collision, some vehicle structure areas such as frame rails, cross-members and rocker panel sections may need to be repaired. In most cases, the anticorrosion materials need to be removed to perform these repairs. These materials are classified into two types: Closed Cavity coatings and Undercoat coatings. The primary difference is the way the products set up or “dry.” Both are intended to protect the surface they are applied to from corrosion caused by water, salt water or Magnesium Chloride blended de-icing compounds used to thaw icy winter roads. They also can provide a measure of sound deadening. The Closed Cavity coatings remain sticky to the touch and will seep into seams initially and over extended periods of time. Closed Cavity coatings provide the best corrosion protection inside of rocker panel sections, pillar sections, frame rails, cross-members, doors, rear compartment lids and closed areas of hoods – anywhere that is concealed or closed off to exterior surfaces. The Undercoat coatings are “dry to the touch” and offer the best corrosion protection and sound deadening for floor pans, wheelhouses, inside rear compartment and underhood areas – anywhere the coated surface is exposed. Below is a listing of products and coatings that GM believes to be reliable. While others may exist, we have found these products, or equivalents to them, can be used with satisfactory results. Always use these products according to their manufacturer’s recommendations. Prep Treatment and First Stage Coating In some instances, repairs may be needed for bare metal or minor surface rust conditions. The phosphate treatment and paint listed below are highly recommended and offer the best corrosion resistance, when applied as a base coat for the Undercoating/Closed Cavity coatings. The following products are available from *Lloyds. Contact them at 1-800-361-6766 or at [email protected]. Stock Number Type Description Pure Prep™ 25418 Metal Surface Preparation 10♦oz. Liquid Phosphate Cleaner/Conditione r Kryptonite 36502 Metal Treatment Life Long Rust Protection 14♦oz. Aerosol Undercoating and Closed Cavity Coatings The following products are available from *Automotive International/Valugard. Contact them at 1-800-543-7156, or at www.valugard.net. Stock Number Type Description 1 VG-104 WAX/SOLVENT BASED UNDERCOAT Traditional Wax/Solvent based Undercoating available in aerosol or spray gun canister Meets OE specifications for corrosion resistance VG-076M HYBRID (SOLV. / WATER) UNDERCOAT Meets OE specifications for corrosion resistance VG-140 WATER BASED UNDERCOAT Meets OE specifications for corrosion resistance VG-101 WAX BASED CLOSED CAVITY COATING Meets OE specifications for corrosion resistance VG-UCG CANISTER UNDERCOATING GUN High quality undercoating gun uses canister packaging of undercoating VG-CRG CANISTER CLOSED CAVITY COATING GUN High quality closed cavity coating gun uses canister packaging of coating and comes with 30" inner panel application tube with nozzle The following products are available through your local *3M® distributor. Information about 3M® product retailers in your area may be obtained at 1-866-3643577 or at http://3mcollision.com/. Stock Number Type Description 08804 No Cleanup WaterBased Undercoating Black Coarse texture SBR rubber and acrylic applied with 3M No-Cleanup Gun 08801 08964 No Cleanup Undercoating Black Smooth texture SBR rubber applied with 3M NoCleanup Gun 08801 2 08881 16♦oz aerosol Undercoating Calcium Carbonate and asphalt based undercoating 08882 17♦oz aerosol Underseal™ Undercoating Black Rubber based, paintable undercoating 08883 19.7♦oz aerosol Rubberized Undercoating Black Synthetic polymer based undercoating 08891 Rust Fighter–1 Amber Closed Cavity Coating — quart canister Synthetic Resin remains tacky seeps into crevices; Applied with 3M Applicator Gun 08997 and Application Wand 08998 08892 Rust Fighter– 1Amber Closed Cavity Coating – 24♦oz aerosol Synthetic Resin remains tacky seeps into crevices; aerosol can 08801 No Cleanup Undercoating Gun — The following products are available from *Crest Industries, Inc. at 1-800-822-4100 or www.crestauto.com. Stock Number Name/Type Description AH-C HONEY COAT/WAX BASED CLOSED CAVITY COATING 16.5♦ OZ AEROSOL CAN AMBER COLORED SEEPS INTO CREVICES AND REMAINS PLIABLE 36" spray wand with 360 degree nozzle available (WA-HC) 3 BZ-BAC BZ-BACB AMBER COAT/WAX BASED CLOSED CAVITY COATING GALLON - AMBER COLORED (BZBAC) OR BLACK (BZ-BACB) SEEPS INTO CREVICES AND REMAINS PLIABLE APPLIED WITH WZ-GRP GUN & SIPHON HOSE Flexible spray wand also available (WA-ND) AC-R RUBBER COAT/RUBBER BASED U PAINTABLE 17.75♦OZ AEROSOL AR-C SUPER RUBBER COAT/LOW V.O.C. RUBBER BASED U PAINTABLE 17.75♦OZ AEROSOL BA-C AUTO COAT/RUBBER BASED U PAINTABLE 28.7♦FL. OZ. CONE-TOP CAN & GALLON APPLIED WITH GU-C UNDERCOATING GUN GU-C UNDERCOATING GUN ATTACHES TO BA-C CONE-TOP CAN WZ-GRP GUN & SIPHON HOSE USED WITH BZBAC & BZ-BACB WA-ND FLEXIBLE SPRAY WAND USED WITH WZGRP The following products are available from *Kent Automotive. Contact them at 1-888-YES-KENT (888-937-5368) or at www.kent-automotive.com. Stock Number Type Description P60305 Wax Based Inner Panel Rustproofer — CLOSED CAVITY COATING 24♦oz. Aerosol (can apply with 36" wand and 360 degree nozzle kit) 4 KT14912 Rubber Guard Low VOC Rubber Based Undercoating 24♦oz. Aerosol (can apply with 36" wand and 360 degree nozzle kit) KT14725 Aerosol Extension Wand Kit 36" wand and 360 degree nozzle KT14796 Rubber Guard Low VOC Rubber Based Undercoating QUART — Applied with undercoating gun P30025 Siphon Feed Gun — P86079 360 Degree Wand for siphon feed gun — The following product is available from *Daubert. For U.S. Dealers only, contact them at 1-800-914-0034 (inside the U.S. only) or at www.daubertchemical.com. Canadian Dealers only must contact the Daubert distributor in Canada, Corrosion Control Coatings Ltd, by faxing the form below to 1-800-563-8078. Stock Number Type Description Nox-Rust® X-121B One Coat Rust Preventive Coating Aerosol -Dries to firm, wax-like film *We believe these sources and their products to be reliable. There may be additional manufacturers of such material. General Motors does not endorse, indicate any preference for or assume any responsibility for the products from these firms or for any such items which may be available from other sources. Important: ONLY Canadian Dealers should use this form. 5 GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information. WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION 6