NTB13-054d

Classification:
Reference:
EC13-007d
Date:
NTB13-054d
June 29, 2018
ALTIMA AND ROGUE; ENGINE TURNS OFF OR HESITATES
WHEN ACCELERATING FROM A STOP DURING HOT AMBIENT
TEMPERATURES (+100°F)
This bulletin has been amended. Table A on page 5 has been revised.
No other changes have been made. Please discard previous versions of this bulletin.
APPLIED VEHICLES: 2013-2017 Altima Sedan (L33)
2014-2017 Rogue (T32)
APPLIED ENGINE:
QR25DE
IF YOU CONFIRM
The engine turns OFF or hesitates when accelerating from a stop during hot ambient
temperatures (+100°F),
AND
The engine is able to be restarted.
ACTION
1. Refer to step 6 in the SERVICE PROCEDURE to see if this bulletin applies to the
vehicle you are working on.
2. If this bulletin applies, reprogram the ECM.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/13
SERVICE PROCEDURE
IMPORTANT: Before starting, make sure:

ASIST on the CONSULT PC has been synchronized (updated) to the current date.

All CONSULT-III plus (C-III plus) software updates (if any) have been installed.
NOTE:

Most instructions for reprogramming with C-III plus are displayed on the CONSULT
PC screen.

If you are not familiar with the reprogramming procedure, click here. This will link
you to the "CONSULT- III plus (C-III plus) Reprogramming" general procedure.
Preparation for Reprogramming

Take the vehicle for a 10 minute drive in order to
meet the following Idle Air Volume Learn (IAVL)
conditions:
 Engine coolant temperature: 70 -100°C
(158 - 212°F)
 Battery voltage: More than 12.9V (At idle)
 Transmission: Warmed up
Figure A
NOTE:
o After ECM reprogramming is complete, you will be required to perform
Throttle Valve Closed Position, Idle Air Volume Learn (IAVL), and Accelerator
Closed Position.
o The above conditions are required for the IAVL to complete.
CAUTION:

Connect a battery charger to the vehicle battery. The vehicle battery voltage
must stay between 12.0V and 15.5V during reprogramming, or the ECM may
be damaged.

Be sure to turn OFF all vehicle electrical loads. If a vehicle electrical load
remains ON, the ECM may be damaged.

Be sure to connect the AC Adapter. If the CONSULT PC battery voltage drops
during reprogramming, the process will be interrupted and the ECM may be
damaged.

Turn OFF all external Bluetooth® devices (e.g., cell phones, printers, etc.)
within range of the CONSULT PC and the VI. If Bluetooth® signal waves are
within range of the CONSULT PC during reprogramming, reprogramming may
be interrupted and the ECM may be damaged.
2/13
NTB13-054d
1. Connect the CONSULT PC to the vehicle to begin the reprogramming procedure.
2. Start C-III plus.
3. Wait for the plus VI to be recognized.

The Serial No. will display when the plus VI is recognized.
4. Select Re/programming, Configuration.
Step
3
Step
4
Figure 1
5. Follow the C-III plus on-screen instructions and navigate to the screen shown in
Figure 2 on the next page.
3/13
NTB13-054d
6. When you get to the screen shown in Figure 2, confirm this bulletin applies as follows:
A. Find the ECM Part Number and write it on the repair order.
NOTE: This is the current ECM Part Number (P/N).
Current P/N
Figure 2
B. Compare the P/N you wrote down to the numbers in the Current ECM Part
Number column in Table A on pages 5 - 7.

If there is a match, this bulletin applies. Continue with the reprogramming
procedure.

If there is not a match, this bulletin does not apply. Return to ASIST for
further diagnostic and repair information.
4/13
NTB13-054d
Table A - Altima
See next page for Rogue vehicles.
Model
Year
Current ECM Part Number: 23710 -
2013
3TA0A, 3TA0B, 3TA0C
3TA1B, 3TA1C, 3TA1D
3TA6A, 3TA6B, 3TA6C, 3TA6D, 3TA6E
3TA7A, 3TA7B, 3TA7C, 3TA7D, 3TA7E
3TA8A, 3TA8B, 3TA8C, 3TA8D, 3TA8E
3TM3A, 3TM3B, 3TM4A, 3TM4B
3TM5A, 3TM5B, 3TM6A, 3TM6B
3TM7A, 3TM7B, 3TM8A, 3TM8B
3TY0A, 3TY0B, 3TY0C
3TY1A, 3TY1B, 3TY1C
3TY6A, 3TY6B, 3TY6C, 3TY6D, 3TY6E
3TY7A, 3TY7B, 3TY7C, 3TY7D, 3TY7E
3TY8A, 3TY8B, 3TY8C, 3TY8D, 3TY8E
2014
3TV3A, 3TV4A, 3TV5A, 3TV6A, 3TV7A, 3TV8A
9HM3A, 9HM3B, 9HM3C, 9HM3D, 9HM3E
9HM4A, 9HM4B, 9HM4C, 9HM4D, 9HM4E
9HM5A, 9HM5B, 9HM5C, 9HM5D, 9HM5E
9HM6A, 9HM6B, 9HM6C, 9HM6D, 9HM6E
9HM7A, 9HM7B, 9HM7C, 9HM7D, 9HM7E
9HM8A, 9HM8B, 9HM8C, 9HM8D, 9HM8E
2015
3GL3A, 3GL3B, 3GL3C
3GL4A, 3GL4B, 3GL4C
3GL5A, 3GL5B, 3GL5C
3GL6A, 3GL6B, 3GL7A, 3GL7B, 3GL8A, 3GL8B
9HP0A, 9HP0B, 9HP0C, 9HP0D, 9HP0E
9HP1A, 9HP1B, 9HP1C, 9HP1D, 9HP1E
9HP2A, 9HP2B, 9HP2C, 9HP2D, 9HP2E
9HP3A, 9HP3B, 9HP3C, 9HP3D, 9HP3E
9HP4A, 9HP4B, 9HP4C, 9HP4D, 9HP4E
9HP5A, 9HP5B, 9HP5C, 9HP5D, 9HP5E
2016
3TH0A, 3TH1A, 3TH2A, 3TH3A, 3TH4A, 3TH5A
3TH6A, 3TH7A, 3TH8A, 3TH9A
3TY2A, 3TY2B, 3TY2C, 3TY2D, 3TY2E
3TY3A, 3TY3B, 3TY3C, 3TY3D, 3TY3E
3TY4A, 3TY4B, 3TY4C, 3TY4D, 3TY4E
3TY5A, 3TY5B, 3TY5C, 3TY5D, 3TY5E
3TY9A, 3TY9B, 3TY9C, 3TY9D, 3TY9E
9HN4A, 9HN4B, 9HN4C, 9HN4D, 9HN4E
9HN5A, 9HN5B, 9HN5C, 9HN5D, 9HN5E
9HN6A, 9HN6B, 9HN6C, 9HN6D, 9HN6E
9HN7A, 9HN7B, 9HN7C, 9HN7D, 9HN7E
9HN8A, 9HN8B, 9HN8C, 9HN8D, 9HN8E
Altima Sedan with
QR25DE Engine
5/13
NTB13-054d
Table A - Altima (continued)
Altima Sedan with
QR25DE Engine
2017
3TF7A, 3TF8A, 3TF9A 9HL0A, 9HL0B, 9HL0D
9HL1A, 9HL1B, 9HL1D
9HL2A, 9HL2B, 9HL2D
9HL3A, 9HL3B, 9HL3D
9HL4A, 9HL4B, 9HL4D
Year
Current ECM Part Number: 23710 -
2014
4BA1A, 4BA1B, 4BA1C, 4BA1D
4BA2A, 4BA2B, 4BA2C, 4BA2D
2015
5HA1A,
5HA2A,
5HA3A,
5HA4A,
Table A - Rogue
Model
Rogue with QR25DE
Engine
2016
5HA1B,
5HA2B,
5HA3B,
5HA4B,
5HA1C,
5HA2C,
5HA3C,
5HA4C,
5HA1D
5HA2D
5HA3D
5HA4D
4BU0A, 4BU1A, 4BU2A, 4BU3A
4BU4A, 4BU5A, 4BU6A, 4BU7A
4BT0A, 4BT0B, 4BT1A, 4BT1B
4BT2A, 4BT2B, 4BT3A, 4BT3B
4BT4A, 4BT4B, 4BT5A, 4BT5B
4BT6A, 4BT6B, 4BT7A, 4BT7B
5HB0A, 5HB1A, 5HB2A, 5HB3A
5HJ0A, 5HJ0B, 5HJ0C, 5HJ0D, 5HJ0E
5HJ1A, 5HJ1B, 5HJ1C, 5HJ1D, 5HJ1E
5HJ2A, 5HJ2B, 5HJ2C, 5HJ2D, 5HJ2E
5HJ3A, 5HJ3B, 5HJ3C, 5HJ3D, 5HJ3E
5HJ4A, 5HJ4B, 5HJ5A, 5HJ5B
5HJ6A, 5HJ6B, 5HJ7A, 5HJ7B
6FJ0A, 6FJ0B, 6FJ0C, 6FJ0D, 6FJ0E
6FJ1A, 6FJ1B, 6FJ1C, 6FJ1D, 6FJ1E
6FJ2A, 6FJ2B, 6FJ2C, 6FJ2D, 6FJ2E
6FJ3A, 6FJ3B, 6FJ3C, 6FJ3D, 6FJ3E
6FJ4A, 6FJ4B, 6FJ4C, 6FJ4D, 6FJ4E
6FJ5A, 6FJ5B, 6FJ5C, 6FJ5D, 6FJ5E
6FJ6A, 6FJ6B, 6FJ6C, 6FJ6D, 6FJ6E
6FJ7A, 6FJ7B, 6FJ7C, 6FJ7D, 6FJ7E
6FK0A, 6FK0B, 6FK0C, 6FK0D
6FK1A, 6FK1B, 6FK1C, 6FK1D
6FK2A, 6FK2B, 6FK2C, 6FK2D, 6FK3C, 6FK3D
6/13
NTB13-054d
Table A - Rogue (continued)
Rogue with QR25DE
Engine
2017
5HK0A, 5HK0B, 5HK0C, 5HK0D
5HK1A, 5HK1B, 5HK1C, 5HK1D
5HK2C, 5HK2D
6FL0A, 6FL0B, 6FL0C, 6FL0D
6FL1A, 6FL1B, 6FL1C, 6FL1D
6FL2A, 6FL2B, 6FL2C, 6FL2D
6FL3A, 6FL3B, 6FL3C, 6FL3D, 6FL4C, 6FL4D
6FL5C, 6FL5D, 6FL6C, 6FL6D
7FF0A, 7FF1A, 7FF2A, 7FF3A
7FF4A, 7FF5A, 7FF6A, 7FF7A, 7FF8A
7FP0A, 7FP0B, 7FP0C, 7FP0D
7FP1A, 7FP1B, 7FP1C, 7FP1D
7FP2A, 7FP2B, 7FP2C, 7FP2D
7FP3A, 7FP3B, 7FP3C, 7FP3D
7FP4C, 7FP4D, 7FP5C, 7FP5D
7FP6C, 7FP6D
7FR3A, 7FR4A, 7FR5A, 7FR6A
7/13
NTB13-054d
7. Follow the on-screen instructions to navigate C-III plus and reprogram the ECM.
NOTES:

In some cases, more than one new P/N for reprogramming is available.
 In this case, the screen in Figure 3 displays.
 Select and use the reprogramming option that does not have the message
“Caution! Use ONLY with NTBXX-XXX”.

If you get this screen and it is blank (no reprogramming listed), it means there is
no reprogramming available for this vehicle.
Figure 3

Before reprogramming will start, you will be required to enter your User Name and
Password.
 The CONSULT PC must be connected to the Internet (Wi-Fi or cable).
 If you do not know your User Name and Password, contact your Service
Manager.
Figure 4
8/13
NTB13-054d
8. When the screen in Figure 5 displays, reprogramming is complete.
NOTE: If the screen in Figure 5 does not display (which indicates reprogramming did
not complete), refer to the information on the next page.
9. Disconnect the battery charger from the vehicle.
10. Select Next.
Step
10
Figure 5
NOTES:

In the next steps (page 11), you will perform Throttle Valve Closed Position, Idle Air
Volume Learn, Accelerator Closed Position, and DTC erase.

These operations are required before C-III plus will provide the final reprogramming
confirmation report.
9/13
NTB13-054d
ECM recovery:
Do not disconnect plus VI or shut down C-III plus if reprogramming does not
complete.
If reprogramming does not complete and the “!?” icon displays as shown in
Figure 6:

Check battery voltage
(12.0 - 15.5 V).

Ignition is ON, engine OFF.

External Bluetooth® devices
are OFF.

All electrical loads are OFF.

Select retry and follow the
on screen instructions.

“Retry” may not go through
on first attempt and can be
selected more than once.
Figure 6
If reprogramming does not complete and the “X” icon displays as shown in
Figure 7:

Check battery voltage
(12. 0 - 15.5 V).

CONSULT A/C adapter is
plugged in.

Ignition is ON, engine OFF.

Transmission is in Park.

All C-III plus / VI cables are
securely connected.

All C-III plus updates are
installed.

Select Home, and restart
the reprogram procedure
from the beginning.
Figure 7
10/13
NTB13-054d
11. Follow the on-screen instructions to perform the following:

Throttle Valve Closed Position

Idle Air Volume Learn (IAVL)
NOTE:

Listed below are common required conditions for IAVL to complete.
 If IAVL does not complete within a few minutes, a condition may be out of
range. Refer to the appropriate Electronic Service Manual (ESM) for specific
conditions required for the vehicle you are working on.
o Engine coolant temperature: 70 -100° C (158 - 212°F)
o Battery voltage: More than 12.9V (At idle)
o Selector lever: P or N
o Electric load switch: OFF (Air conditioner, headlamp, rear window defogger)
o Steering wheel: Neutral (Straight-ahead position)
o Vehicle speed: Stopped
o Transmission: Warmed up (ATF TEMP SE less than 0.9V)

Accelerator Pedal Close Position Learning

Erase DTCs
Continue to the next page.
11/13
NTB13-054d
12. When the entire reprogramming process is complete, the screen in Figure 8 will
display.
13. Verify the before and after part numbers are different.
14. Print a copy of this screen (Figure 8) and attach it to the repair order for warranty
documentation.
15. Select Confirm.
Step
13
Step
14
Step
15
Figure 8
16. Close C-III plus.
17. Turn the ignition OFF.
18. Disconnect the plus VI from the vehicle.
12/13
NTB13-054d
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE SYM
DIA
FRT
Reprogram Engine Control
(1)
DE97AA
ZE
32
(2)
Module
(1) Refer to the electronic parts catalog (FAST or equivalent) and use the ECM part number
as the Primary Failed Part (PFP).
(2) Reference the current Nissan Warranty Flat Rate Manual and use the indicated FRT.
13/13
NTB13-054d