SSM 47635
Service Bulletin Details
Public Details for: SSM 47635
When connecting the vehicle communication module (vcm) and integrated diagnostic system (ids) or ford diagnosis and repair system (fdrs) to the dlc located on the driver side under the steering column at the gwm, make sure that the ignition
- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -
Models from 2019
2019 FORD FUSION |
2019 FORD MUSTANG |
2019 FORD TRANSIT |
2019 FORD TRANSIT CONNECT |
2019 LINCOLN CONTINENTAL |
2019 LINCOLN MKC |
2019 LINCOLN MKZ |
Models from 2018
Models from 2017
2017 FORD EDGE |
2017 FORD EXPLORER |
2017 FORD F-150 |
2017 FORD FUSION |
2017 FORD MUSTANG |
2017 LINCOLN CONTINENTAL |
2017 LINCOLN MKC |
2017 LINCOLN MKX |
2017 LINCOLN MKZ |
Models from 2016
2016 FORD EDGE |
2016 FORD EXPLORER |
2016 FORD F-150 |
2016 FORD FUSION |
2016 FORD MUSTANG |
2016 LINCOLN MKC |
2016 LINCOLN MKX |
2016 LINCOLN MKZ |
Models from 2015
2015 FORD EDGE |
2015 FORD F-150 |
2015 FORD FUSION |
2015 FORD MUSTANG |
2015 LINCOLN MKC |
2015 LINCOLN MKZ |
Models from 2014
2014 FORD FUSION |
2014 LINCOLN MKZ |
Models from 2013
2013 FORD FUSION |
2013 LINCOLN MKZ |
SSM 47635 When connecting the Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) or Ford Diagnosis and Repair System (FDRS) to the DLC located on the driver side under the steering column at the GWM, make sure that the ignition is off before connecting the VCM. If the ignition is on or the engine is running during the connection, it can result in various warning lights being illuminated with diagnostic trouble codes (DTCs), no start, no crank conditions or the IPC inoperative. If a vehicle displays these issues, disconnect the equipment from the DLC and disconnect the vehicle battery. Wait 10 minutes and reinstall with the ignition off. Clear any DTCs present and retest.