19TL-9

Service Bulletin Details

Public Details for: 19TL-9

Dtna special tools group has approved the use of haweka axis4000 aftermarket alignment system for use on dtna products at dtna service locations. The axis4000 system uses the reference points required by dtna for precise, accurate, and repe


- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 -

No.: 19 TL-9
July 29, 2019
TO:
Service Locations
FROM:
Service Systems Development
SUBJECT:
Haweka Axis4000™ Alignment System
GENERAL INFORMATION
DTNA Special Tools Group has approved the use of Haweka’s Axis4000 aftermarket alignment
system for use on DTNA products at DTNA service locations. The Axis4000 system uses the
reference points required by DTNA for precise, accurate, and repeatable measurements.
Axis4000 is a sophisticated, user-friendly system that utilizes computer based camera-radio
technology and references the center line of the frame for measuring and providing alignment
results to DTNA specifications.
Axis4000 is manufactured by Haweka AG and distributed throughout North America by its
partner Allpart Supply in Texas. The system is globally endorsed and accepted in the Mercedes
Benz homologation program.
INSTRUCTIONS
Operating instructions are included in the purchase of the Axis4000 System. In addition, all
operating and measurement instructions are provided step by step in the system software.
Further operating and service information can be obtained by contacting either Allpart Supply or
Big Rig Alignment Company.
FEATURES
•
•
•
•
•
•
Center Line of Frame Measurement System.
Camera-Radio Technology
Measurements in Driving Position – No Lifting Required
Precise, Accurate and Repeatable Alignment Measurements for Any Commercial
Vehicle
Multi-Axle Vehicles Can Be Aligned Without Removing Wheel Adapters
Medium Duty Vehicles Aligned with MD Specific Wheel Adapters (purchase optional)
-1-
19 TL-9
-2-
7/29/2019
WARRANTY INFORMATION
The Axis4000 alignment system is warranted through Allpart Supply. For all Axis4000 warranty
services, see contact information below.
CONTACT INFORMATION
AXIS4000 CONTACT
For Axis4000 system information, please call the following:
Jon Barganier, Vice President
Allpart Supply
Toll Free: 800.381.1330 xt 140
Direct: 817.290.0068
Cell: 817.988.8188
Email: [email protected]
John Ashal, President
Big Rig Alignment Company
Direct: 520.591.3826
Email: [email protected]


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.