02-151

02-151 Model 320/520 Power Window Module
Page 1 of 2
Service Bulletin
02-151
Section
02 - Cab Interior
Description
Models 320/520 Power Window Module Improvement
Release Date
12/11/2019
Revision History
12/16/2019 - Corrected description on a the vapor barrier and mounting bracket.
12/11/2019 - Updated part S-7001 to S7001
Introduction
Peterbilt has initiated an improvement to the Model 320/520 power window module. A vapor barrier will
be installed over the module to prevent moisture.
Resolution
Fix-as-Fail
If a vehicle enters the dealership with a failed window module, remove and replace the failed module and
add the vapor barrier. If the window module on the other door has not failed, install the vapor barrier
only. (See the attached procedure).
Warranty
If the customer is experiencing the condition listed above, Peterbilt will pay through Standard Warranty
for parts and labor to install a vapor barrier:
1.2 hours to remove and replace the window module, and install a vapor barrier over the
module, only the failed module should be replaced but vapor barriers are required for both
doors. File a long form claim and reference 02151 in the “CCC”
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldservice/Pag... 12/30/2019
02-151 Model 320/520 Power Window Module
Page 2 of 2
field.
For Field...
Enter...
Failure Location
002-018-031
Failure Type
185
Claim Type
N
Campaign Number
02-151
Labor
002-912 – 1.2 Hours Labor to R&R the
module and install a vapor barrier on
both doors.
Take off parts disposition: Destroy all take off parts 30 days after claim has been paid.
Parts
Parts are available at PACCAR Parts. Review the repair procedure to determine parts needed.
Part #
Description
HWC08028
SCREW-MACH PAN PSD M5-0.80X20 BLK
Qty
4
P11-6411
Mounting Bracket
2
Q21-1050
Control- Door Relay Module
1
Q21-1051-001
Control- Door Relay Module Driver Side
1
S7001
Vapor Barrier
2
Source Locally
Zip ties
3
Procedure
Follow the below procedures to add vapor barriers in both doors and replace any failed modules.
Important: Do not replace modules that have not failed. Replace modules in both doors only if both
modules have failed.
02-151 Model 320/520 Power Window Module Repair Procedure
Authored by: DKH
Access to PACCAR’s Enterprise Portal is provided as a benefit of doing business with PACCAR. All applications and content accessed
through this system are confidential and proprietary and the property of PACCAR Inc and its suppliers, and must be kept strictly
confidential pursuant to the contract licensing such access. Disclosure, publication, release or distribution of any material found on
PACCAR systems to any person other than employees with a need to know such information is strictly prohibited. All activity on this
system is monitored. If PACCAR suspects or discovers any unauthorized activity, access may be immediately terminated without
prior notification. Violators may be subject to legal action.
© Copyright 2019 PACCAR Inc. All rights reserved. We welcome your feedback on this page. For technical questions or concerns
about this page, please contact the DealerNet Webmaster.
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldservice/Pag... 12/30/2019