TT 96 14 05
Service Bulletin Details
Public Details for: TT 96 14 05
Update to existing information. Update to model year applicability.
- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 -
Models from 2020
2020 VOLKSWAGEN ATLAS |
2020 VOLKSWAGEN E-GOLF |
2020 VOLKSWAGEN EGOLF |
2020 VOLKSWAGEN GOLF |
2020 VOLKSWAGEN GOLF R |
2020 VOLKSWAGEN GTI |
2020 VOLKSWAGEN JETTA |
2020 VOLKSWAGEN TIGUAN |
Models from 2019
Models from 2018
2018 VOLKSWAGEN ATLAS |
2018 VOLKSWAGEN EGOLF |
2018 VOLKSWAGEN GOLF |
2018 VOLKSWAGEN GOLF ALLTRACK |
2018 VOLKSWAGEN GOLF R |
2018 VOLKSWAGEN GOLF SPORTWAGEN |
2018 VOLKSWAGEN GTI |
2018 VOLKSWAGEN TIGUAN |
Models from 2017
2017 VOLKSWAGEN EGOLF |
2017 VOLKSWAGEN GOLF |
2017 VOLKSWAGEN GOLF ALLTRACK |
2017 VOLKSWAGEN GOLF R |
2017 VOLKSWAGEN GOLF SPORTWAGEN |
2017 VOLKSWAGEN GTI |
Models from 2016
2016 VOLKSWAGEN EGOLF |
2016 VOLKSWAGEN GOLF |
2016 VOLKSWAGEN GOLF R |
2016 VOLKSWAGEN GOLF SPORTWAGEN |
2016 VOLKSWAGEN GTI |
Models from 2015
2015 VOLKSWAGEN EGOLF |
2015 VOLKSWAGEN GOLF |
2015 VOLKSWAGEN GOLF R |
2015 VOLKSWAGEN GOLF SPORTWAGEN |
2015 VOLKSWAGEN GTI |
Technical Tip 96-14-05TT - Immobilizer Key/Key Remote Adaptation Test Plan Transaction No: 2038198/14 Release date: 1/24/2020 Condition ATTENTION: THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN. TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING. Applicable Vehicles Model(s) Year Eng. Code Trans. Code VIN Range From VIN Range To Golf, GTI, Golf R, eGolf, Golf SportWagen 2015-2020 All All All All Atlas, Tiguan LWB 2018-2020 All All All All Jetta 2019-2020 All All All All Revision Table Instance Number Published Date Version Number Reason For Update 2038198/14 1/24/20 96-14-05TT To include model year 2020 applicability. 2038198/1 8/22/14 96-14-05TT Original publication. Technical Background To adapt keys, any immobilizer component including the Control Module for Emergency Call Module and Communication Unit -J949- or a new identity, makes it necessary to complete the “Adapt Immobilizer” test plan. Kessy Vehicles: Verify that the reader coil is removed from the steering column and the key is touching the reader coil during key adaptation (Figures 1a – 1c). Bladed key vehicle, it is not necessary to remove the reader coil. The test plan can be found under the ODIS Service Special Functions Tab (Figure 2) or by navigating to “Immobilizer functions” under “Elect. Immobilizer 5A” after clicking the “Select self-test” button in the Test Plan tab (Figure 3). This procedure adapts both the remote and immobilizer functions of the key. Note: Vehicle may not start and or have warning lights on cluster after immobilizer / key adaptation is completed. See figure 9 information in this tech tip after immobilizer / key adaptation for further instructions. Prior to starting the test plan to adapt the immobilizer, the key positioning on the reader coil itself is critical. Monitor MVB information in the immobilizer with the key touching the reader coil to verify a key ID is being seen. Key ID MVB information may either be found under Address word 25 Immobilizer or Address word 17 Instrument cluster depending on vehicles module protocol. 1 Technical Tip 96-14-05TT - Immobilizer Key/Key Remote Adaptation Test Plan Transaction No: 2038198/14 Release date: 1/24/2020 Service If the key ID is not being seen in the MVB reading, then rotate the key around the reader coil until the key ID is seen in MVB information. Possible key placements at Reader Coil 2 Technical Tip 96-14-05TT - Immobilizer Key/Key Remote Adaptation Test Plan Transaction No: 2038198/14 Release date: 1/24/2020 Figure 2 Figure 3 3 Technical Tip Transaction No: 2038198/14 Release date: 1/24/2020 96-14-05TT - Immobilizer Key/Key Remote Adaptation Test Plan When prompted by the test plan, make the selection to Repair immobilizer (Figure 4). Figure 4 Once the purchaser’s information is entered and valid login credentials are provided, the adaptation status of all immobilizer components is displayed (Figure 5). Select “Complete/Continue”. Figure 5 4 Technical Tip 96-14-05TT - Immobilizer Key/Key Remote Adaptation Test Plan Transaction No: 2038198/14 Release date: 1/24/2020 Select “Yes” when prompted to perform key adaptation (Figure 6). Figure 6 Use the + and – buttons to select the number of keys to be adapted, then select “OK” (Figure 7). Figure 7 5 Technical Tip 96-14-05TT - Immobilizer Key/Key Remote Adaptation Test Plan Transaction No: 2038198/14 Release date: 1/24/2020 Continue to follow test plan instructions to complete key adaptation (Figure 8). Figure 8 Vehicle doesn’t start and or warning lights ON after immobilizer / key adaptation. Check for faults related to modules that may no longer be coded (Figure 9). Figure 9 6 Technical Tip 96-14-05TT - Immobilizer Key/Key Remote Adaptation Test Plan Transaction No: 2038198/14 Release date: 1/24/2020 It will be necessary to recode all modules that are no longer coded. Code modules online under the special functions tab, “Code online control module”. Modules may include, but not limited to ECM, ABS, TCM. The FES test plan may need to be ran on the Gateway AW 19, select #2 “Re-create function” (Figure10). Figure 10 Additional Information © 2020 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 7