S7496

Service Bulletin Details

Public Details for: S7496

Reman engine label replacement


- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -

Models from 2016
2016 MACK GU
Models from 2015
2015 MACK GU
Models from 2014
2014 MACK GU
Models from 2013
2013 MACK GU
Models from 2012
2012 MACK GU
Models from 2011
2011 MACK GU
Models from 2010
2010 MACK GU
Models from 2009
2009 MACK GU
Service Campaign – S7496
May 06, 2020
Remanufactured Engine Label Replacement
Service
Category: Engine
Section: Engine Label
Technician Skill Level C
Applicability
Mack
Years
2003 - 2016
Market North America
Models
CH, CT, CX, GU, LE, MR
Additional Information
Engine Serial # Label
Description
Mack Trucks has identified that certain model trucks may have installed a Re-manufactured
engine with an incorrect Engine Serial # Label. Follow the campaign instructions to order and
install a new Engine Serial # Label.
Service Campaign – S7496
May 06, 2020
Remanufactured Engine Label Replacement
Claiming Information
This repair is covered by an authorized Service Program Campaign.
Reimbursement is obtained through the normal claim handling process.
Claim Type (used only when uploading from the Dealer Bus. Sys.)
40
Primary Labor
Description
Hours
Code
1720-16-09-01
Campaign, General (0.1 hr. x qty. 3 - Replace
Label)
Expiration Date
0.3
May 31, 2021
Causal Part
23353955
Authorization
Number
S7496
Parts Information
Engine
Part Names
All
Reman Engine Label
* Label will be provided at No Charge.
Part Numbers
Qty.
N/A (Use VIN)
1
Parts Ordering Information
An email is required to order parts list. Email [email protected] and include the following
in the body of the email:
•VIN of vehicle being repaired
•Dealer ID number
•Campaign Number
A response will be provided within 2 hrs. (Monday-Friday 8am to 5pm EST.)
Required Tools & Equipment
 N/A
Calibration Information
Service Campaign – S7496
May 06, 2020
Remanufactured Engine Label Replacement

N/A
Repair Procedure
1. Remove old label completely (Image #1), and clean surface of any adhesive residue using a suitable
cleaner (Image #2)
2. Allow surface to dry completely and apply new label to same position/location as the removed label.
Image #1
Image #2
NOTE
Images are for reference only, label location may vary per Engine
Emission Level, always apply label to original label location.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.