2054599/6
Service Bulletin Details
Public Details for: 2054599/6
Headlamp operation issues. Customer statement / workshop findings: headlamp operation issues technical background: dtcs evident within the left light control unit (diagnostic address d6) and/or the right light control unit (diagnostic a
- 2021 - 2020 - 2019 - 2018 - 2017 -
Models from 2021
2021 BENTLEY BENTAYGA |
2021 BENTLEY CONTINENTAL GT |
2021 BENTLEY CONTINENTAL GTC |
2021 BENTLEY FLYING SPUR |
Models from 2020
2020 BENTLEY BENTAYGA |
2020 BENTLEY CONTINENTAL GT |
2020 BENTLEY CONTINENTAL GTC |
2020 BENTLEY FLYING SPUR |
Models from 2017
2017 BENTLEY BENTAYGA |
Technical product information Topic Market area Brand Transaction No. Level Status Release date Headlamp operation issues Bentley: worldwide (2WBE),Hongkong-Macau (5HK) Bentley 2054599/6 EH Released for publishing 22-Oct-2020 New customer code Object of complaint Complaint type Position electrical power, electric system, data transfer -> power supply functionality lighting system, signalling -> exterior illumination -> main lights functionality -> partially without function > not specified < lighting system, signalling -> exterior illumination -> main lights functionality -> uneven > not specified < Vehicle data New Continental GT and New Continental GTC Sales types Type 3S3* 3S3* 3S3* 3S3* 3S4* 3S4* 3S4* MY 2018 2019 2020 2021 2019 2020 2021 Brand Designation Engine code E * E * E * E * E * E * E * Gearbox code * * * * * * * Final drive code * * * * * * * New Flying Spur Sales types Type MY Brand Designation Engine code Gearbox code Final drive code ZG2* 2020 E * * * ZG2* 2021 E * * * Bentayga Sales types Type MY Brand Designation Engine code Gearbox code Final drive code 4V1* 4V1* 4V1* 4V1* 4V1* 2017 2018 2019 2020 2021 E E E E E Documents Document name master.xml * * * * * * * * * * * * * * * Technical product information Headlamp operation issues Transaction No.: 2054599/6 Release date: 22-Oct-2020 Customer statement / workshop findings Headlamp operation issues Technical background DTC’s evident within the left light control unit (Diagnostic address D6) and/or the right light control unit (Diagnostic addr ess D7) There are numerous static and intermittent DTC’s which may be evident within the previously mentioned control units, ensure a ll steps within the Measure section are strictly adhered to Production change Not applicable Measure 1) Remove the applicable front wheel arch liner – Refer to Repair manual Rep.Gr 66 2) Referring to the examples shown in Figures 1 and 2 Disconnect the applicable headlamp plugs (right and/or left hand side) - During disconnection look out for any abnormalities for example a plug which is loose/broken or is easily disconnected Figure 1 Figure 2 3) Check the condition of the headlamp plug and terminals 4) Check the condition of the headlamp assembly connection pins 5) Using the applicable Elsa pro wiring diagrams – Check the electrical integrity of the complete headlamp circuit • Should ANY concerns be found within steps 2,3,4 or 5 - The operative must rectify accordingly and once rectified – Carry out the remaining instructions • Should NO concerns be identified – Carry out the remaining instructions 6) Reconnect the headlamp plugs NOTE: An audible click will be heard once the plug is refitted/connected correctly 7) Carry out a pull check to confirm correct fitment 8) Erase any related DTC’s using offboard Diagnostic Information System (ODIS) • Carry out a road test (maximum of 50 time units) to confirm the headlamps are fully functional • On return from road test – using offboard Diagnostic Information System (ODIS) recheck for any returning DTC’s • Should the DTC’s return replace the applicable headlamp – Refer to Repair manual Rep.gr 94 Lights, lamps, switches outside 9) Should the DTC’s not be evident and the headlamps are fully functional, no further action is required Warranty accounting instructions Wiring checks Warranty type 110 or 910 Damage service number 94 18 Damage code 00 28 Labour Labour operation code 97 09 01 99 Time 20 Time units Diagnostic time Labour Labour operation code 01 50 00 00 Time Road test Labour As per ODIS log (Must not exceed 20 Time units) Labour operation code 01 21 00 00 Time 50 Time units NOTE: Due to numerous model variations in which this TPI covers, please refer to Labour operations within Elsa pro for all times relating to front wheel arch liner removal and refitting