TSB-20-52A-002
Service Bulletin Details
Public Details for: TSB-20-52A-002
This technical service bulletin was sent informing dealers an abnormal rubbing noise is heard from the seat back when a driver and/or passenger is seated in the front seat(s) and instructs dealers to apply nonwoven fabric tape between the s
- 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -
Models from 2017
| 2017 MITSUBISHI OUTLANDER |
Models from 2016
| 2016 MITSUBISHI OUTLANDER |
Models from 2015
| 2015 MITSUBISHI OUTLANDER |
Models from 2014
| 2014 MITSUBISHI OUTLANDER |
Models from 2013
| 2013 MITSUBISHI OUTLANDER |
Models from 2012
| 2012 MITSUBISHI OUTLANDER |
Models from 2011
| 2011 MITSUBISHI OUTLANDER |
Models from 2010
| 2010 MITSUBISHI OUTLANDER |
Models from 2009
| 2009 MITSUBISHI OUTLANDER |
Models from 2008
| 2008 MITSUBISHI OUTLANDER |
Models from 2007
| 2007 MITSUBISHI OUTLANDER |
Models from 2006
| 2006 MITSUBISHI OUTLANDER |
Models from 2005
| 2005 MITSUBISHI OUTLANDER |
Models from 2004
| 2004 MITSUBISHI OUTLANDER |
Models from 2003
| 2003 MITSUBISHI OUTLANDER |
* * TECHNICAL INFORMATION NOTICE * * DATE: October 16, 2020 TO: Mitsubishi Motors US & Puerto Rico Dealer Parts and Service Managers RE: Seat Slide Sensor Wiring Harness Damage Under Driver’s Seat TIN Number: TIN-20-52A-002 AFFECTED VEHICLES: 2013 – 2020 (ZC) Outlander Sport PURPOSE: MMNA has identified warranty claims for SRS DTCs B1558 “OCM DTC Present” and B1556 “Driver’s Seat Slide Sensor Malfunction” with OCM DTC B1B8D “Driver’s Seat Slide Sensor Open Circuit”. Additional OCM DTCs that may also be present are: B1B8C “Driver's Seat Slide Sensor Circuit Performance” and B1B8E “Driver's Seat Slide Sensor Short Circuit”. During diagnosis for this condition, dealers should check for damage to the driver’s seat slide position sensor harness. If a damaged harness is found, DO NOT replace the front seat adjustor or SRS ECU for this condition. Please replace the seat harness with the counter measured part listed in the parts information section below. NOTE: In MUT-III, the DTC B1556 (in SRS ECU) currently has the description “PS.seat position SW fail”. B1556 represents an issue with the driver’s seat. Additionally, wiring for the seat belt buckle switch, heated seat, and power seat motor (if equipped) are found in the same under-seat location as the harness for the driver’s seat slide sensor. MMNA has identified claims for inoperative function or DTCs for the seat belt buckle switch (SRS DTC B1527 [Open], or B1528 [Short]), heated seat, and power seat motor that could also be related to wiring concerns under the driver’s seat area. These components are not serviced with the front seat adjustor and are available separately, as identified in CAPS. Please inspect these harnesses if inoperative functions or DTCs exist for the driver’s seat belt buckle switch, heated seat, and/or power seat. Parts information: Harness tube of the seat slide sensor was changed to improve its durability as of May 22nd, 2020 (VIN:JA4AP4AU5LU031440). Harness tube Original harness tube Countermeasure harness tube ** Part# - Qty - 98864W000P 1 Internal diameter Φ4.0 Φ5.0 Material PVC PVC Refer to applicable LOTS manual for proper labor operation codes and amounts. Page 1 of 1 (4964)