Mitsubishi Outlander 2009

• Recall 153111 [USA]: A detached front control arm can result in a loss of vehicle control, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2008-2010 lancer, 2009-2010 lancer sportback, 2008-2013 outlander, and 2011-2016 outlander sport vehicles originally sold in, or ever registered in, connecticut, delaware, the district of columbia, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, and wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.
  mmna will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one. These repairs will be performed free of charge. The recall began august 7, 2020. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-20-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 134627 [USA]: If the sunroof glass detaches from the assembly while driving, it can become a road hazard, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2007-2010 outlander, 2008-2010 lancer, 2009-2010 lancer evolution, and 2010 lancer sportback vehicles equipped with sunroofs. The sunroof glass may detach from the sunroof assembly, becoming a road hazard to other vehicles.
  mmna will notify owners, and dealers will replace the sunroof glass assembly, free of charge. The recall began on february 27, 2018. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-18-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 129532 [USA]: If the drive belt detaches, the battery will discharge and the engine will stall, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2009-2012 lancer, 2008-2012 outlander, 2010-2012 lancer sportback, and 2011-2012 outlander sport vehicles equipped with either a 4b11 or 4b12 engine. The drive belt automatic tensioner flange may crack, allowing the accessory drive belt to detach.
  mmna will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin march 27, 2018. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-18-001.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 124008 [USA]: Failure of the wiper motor can cause a loss of visibility, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2007-2013 outlander vehicles. In the affected vehicles, water may drop between the hood and the windshield and leak into the wiper motor breathing hole. The water may cause internal corrosion of the windshield wiper motor and the possible failure of the motor.
  mmna will notify owners, and dealers will replace the wiper motor, free of charge. The recall began july 28, 2017. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-17-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 125714 [USA]: Loss of wiper function can reduce visibility and increase the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain model year 2007-2013 outlander vehicles manufactured september 8, 2006, to march 29, 2013. In the affected vehicles, water may enter between the hood and windshield and cause the front wiper link ball joint to corrode, possibly resulting in the wiper link separating and the wipers becoming inoperative.
  mmna will notify owners, and dealers will replace the rubber boot on the ball joint to prevent water intrusion. Additionally, they will inspect the wiper motor crank arm for excessive play, replacing it as necessary. These repairs will be done free of charge. The recall began on july 28, 2017. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-16-009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 113018 [USA]: A detached front control arm can result in the loss of control of the vehicle, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain model year 2002-2007 lancer, 2004 lancer wagon, 2003-2006 lancer evolution, 2003-2006 outlander and 2007-2013 outlander v-6 vehicles originally sold in, or ever registered in, connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, wisconsin and the district of columbia. In the affected vehicles, the front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.
  mmna will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one that has a sealing/anti-corrosion agent applied to it. These repairs will be performed free of charge. The recall began january 2017. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-16-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 111345 [USA]: Failure of the blower motor may reduce the performance of the windshield defroster, diminishing the driver's visibility and increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2011 lancer vehicles manufactured march 16, 2009, to march 30, 2011, 2010-2011 lancer sportback vehicles manufactured june 17, 2009, to december 1, 2010, 2010-2011 lancer evolution vehicles manufactured july 14, 2009, to january 7, 2011, 2009-2011 outlander vehicles manufactured february 10, 2009, to june 22, 2011, and 2011 outlander sport vehicles manufactured august 26, 2010, to november 19, 2010. In the affected vehicles, the blower motor may fail.
  mitsubishi will notify owners, and dealers will replace a suspect blower motor, free of charge. The recall began on june 15, 2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 113255 [USA]: Unstable voltage could result in intermittent failure of the vehicle's head lights, tail lights, and windshield wipers. if the headlights and/or windshield wipers fail, the driver could have reduced visibility. if the tail lights fail, the vehicle could be less visible. either condition increases the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2010 mitsubishi lancer vehicles manufactured january 12, 2009, to july 6, 2010, 2009-2010 outlander vehicles manufactured january 12, 2009, to august 27, 2010, 2010 lancer sportback vehicles manufactured june 17, 2009, to june 8, 2010, and 2010 lancer evolution vehicles manufactured july 14, 2009, to august 4, 2010. The affected vehicles have an electronic control unit (ecu) that controls the head lights, tail lights, and windshield wipers. Due to a manufacturing error, the voltage inside this ecu may be unstable.
  mitsubishi will notify owners, and dealers will replace the affected ecu, free of charge. The recall began on june 15 ,2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-002.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 114115 [USA]: Brake lights that are inoperative would not warn other drivers that the vehicle is stopping, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2007-2009 outlander vehicles manufactured december 15, 2006, to october 31, 2007, and april 16, 2008, to august 22, 2009. In the affected vehicles, the brake light switch may malfunction causing the brake lights to not illuminate during brake application.
  mitsubishi will notify owners, and dealers will replace the brake light switch with a new one, free of charge. The recall began in mid-october 2014. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-14-010. Note: this recall is an expansion of recall 08v-680 and does not include any vehicles that were previously recalled.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 105440 [USA]: If the drive belt detaches, the battery may discharge, resulting in an engine stall, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2008-2011 lancer, lancer evolution, and outlander; 2009-2011 lancer sportback, lancer rilliart, and lancer sportback ralliart; and 2011 outlander sport vehicles. The affected vehicles, manufactured with 4b1 engines, have an engine pulley and belt arrangement for turning the alternator, the cooling fan and the power steering pump (if equipped). These pulleys may experience unusual wear and allow for belt detachment.
  mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on october 15, 2014. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-14-009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 104433 [USA]: If the oil seal dislodges, automatic transmission fluid (atf) may enter the transfer case assembly, reducing the atf pressure in the transmission, resulting in poor transmission shifting or the inability of the vehicle to be driven, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2007 and 2009 outlander vehicles. During servicing, the affected vehicles were repaired with replacement transfer case assemblies whose oil seal may come out of position.
  mitsubishi will notify owners, and dealers will replace the transfer assembly, as necessary, free of charge. The recall began on july 30, 2014. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-14-005.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 104179 [USA]: A power steering fluid leak could result in a loss of steering assistance, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2013 outlander vehicles equipped with a 6-speed automatic transmission. Additionally, mitusbishi is recalling certain 2007-2012 outlander vehicles that received replacement 6-speed automatic transmissions during servicing. The transmissions in these vehicles have insufficient clearance between the power steering pressure tube and the converter housing of the automatic transmission. As a result of the contact, the power steering pressure tube may develop a hole and leak power steering fluid.
  mitsubishi will notify owners, and dealers will replace the power steering pressure tube and return tube, free of charge. The recall began in august 2014. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-14-006.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 67259 [USA]: This may temporarily increase the stopping distance of the vehicle and therefore increase the risk of a crash.
  Mitsubishi is recalling 39,711 my 2008-2009 outlander and lacer vehicles. Incorrect material composition of the brake booster check valve may cause the check valve to stick closed when the engine is shut off. When the vehicle is re-started and put into motion, under certain driving conditions (very slow vehicle maneuvers), there may be insufficient initial braking assist.
  dealers will replace the brake booster check valve free of charge. The recall is expected to begin during april 2009. Owners may contact mitsubishi at 1-800-222-0037.
  mitsubishi recall no. Sr-09-002.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall R/2018/117 [UK]: Water ingress may cause windscreen wipers to fail
  Due to inappropriate waterproofing water may be drawn into the front wiper motor and/or may cause corrosion of the wiper link ball joint. This may over time cause the wipers to fail.
  on affected vehicles replace the wiper motor which has a modified breather and wiper link ball joint.

  Show Content

• Recall R/2018/336 [UK]: Sunroof glass may detach from the sunroof assembly
  The sunroof glass may detach from the sunroof assembly.
  replace the sunroof glass and bonding material.

  Show Content

• Recall R/2014/109 [UK]: Brake lamps may not illuminate
  Silicon grease applied to the brake light switch during production may penetrate the switch and insulate the contacts. This may prevent the stop lamps from operating and on vehicles with automatic transmission the shift lever cannot be moved from the park position.
  clean mounting and replace brake light switch

  Show Content

• Recall R/2014/124 [UK]: Loss of power steering assistance
  Due to the use of inappropriate material for the drive belt on the 4b1 petrol engine the nylon idler pulley(s) may wear at an angle. If this continues under this condition the drive belt will be forced off the pulleys. This can lead to battery depletion overheating and on vehicles with hydraulic power steering the steering effort will increase.
  replace drive belt. Check and if necessary replace idler pulley(s)

  Show Content

• Recall R/2009/037 [UK]: Lack of brake servo assistance
  It has been identified that after the vehicle has been stationary for some length of time increased pressure may need to be applied to the footbrake pedal to bring the vehicle to a stop. This is due to insufficient vacuum assistance within the brake booster due to a failure of the check valve. It should be noted that on the second application of the footbrake the check valve will operate as designed and the brakes will operate as normal.
  recalled vehicles will have the brake booster check valve replaced.

  Show Content

• Recall R/2014/109 [UK]: Brake lamps may not illuminate
  Silicon grease applied to the brake light switch during production may penetrate the switch and insulate the contacts. This may prevent the stop lamps from operating and on vehicles with automatic transmission the shift lever cannot be moved from the park position.
  clean mounting and replace brake light switch

  Show Content

• Recall R/2018/335 [UK]: The flange of the drive belt automatic tensioner may crack
  Power steering drive belt automatic tensioner may crack and fail.
  replace the automatic tensioner and bolts.

  Show Content

• Recall R/2015/157 [UK]: Ecu malfunction may cause systems to become inoperable
  During operation the headlights and or the windscreen wipers amongst other systems may become inoperable as a result a none conformity in the electronic time & alarm system (etacs) ecu.
  recall the vehicles that are likely to be affected and check the production date of the etacs ecu. The etacs ecu will be replaced if it is within the affected production dates.

  Show Content

• Recall 2020216 [Canada]: Structure
  Issue: on certain vehicles, road salt can corrode the front cross-member (subframe). As a result, a lower control arm could eventually detach from the cross-member. This could cause a loss of vehicle control. Safety risk: a loss of control can create the risk of a crash. Corrective actions: mitsubishi will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front cross-member (subframe). If no significant corrosion is found, the dealer will spray a sealing and anti-corrosion coating both inside and on the cross-member. If significant corrosion is found, the dealer will replace the cross-member.

  Show Content

• Recall 2018054 [Canada]: Accessories
  On certain vehicles, the sunroof may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: dealers will replace the sunroof glass assembly.

  Show Content

• Recall 2018052 [Canada]: Electrical
  On certain vehicles, the flange of the drive belt automatic tensioner may crack over time due to repetitive high load operations and stress concentration. This could cause the drive belt to detach, leading to battery depletion, which would result in a loss of motive power and a loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the auto tensioner with a countermeasure unit.

  Show Content

• Recall 2017364 [Canada]: Visual system
  On certain vehicles, water may drain from the windshield cowl area and potentially collect in the area of the wiper motor breathing hole. If the wiper motor is not operating, water could potentially enter the wiper motor through the breathing hole. If this occurs, over time, it could result in corrosion and/or an electrical conduction failure, both of which could result in the wiper motor not operating. If the wiper motor were to stop operating, the windshield wipers would become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the wiper motor with an upgraded wiper motor that will prevent water intrusion.

  Show Content

• Recall 2016529 [Canada]: Visual system
  On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the rubber boot which covers the ball joint with a countermeasure one, and the wiper motor crank arm will also be inspected and replaced as necessary.

  Show Content

• Recall 2016317 [Canada]: Structure
  On certain vehicles, road salt can corrode the front crossmember assembly, which may ultimately lead to separation of the control arm at the mounting point. This would allow the wheel to rotate off its designed axis, and could result in a loss of vehicle control and a crash causing property damage and/or personal injury. Correction: dealers will inspect the crossmember and apply an anti-corrosion treatment or replace the assembly, as required.

  Show Content

• Recall 2015166 [Canada]: Heater and defroster
  On certain vehicles, the blower motor may have been incorrectly manufactured. This could result in a premature failure of the blower motor which could affect the defroster performance resulting in reduced visibility, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will replace blower motor and the power transistor as needed.

  Show Content

• Recall 2015165 [Canada]: Lights and instruments
  On certain vehicles, the ecu which controls the head lights, tail lights and windshield wipers may have been improperly manufactured. This could cause the voltage in the ecu to become unstable and cause the head lights and/or tail lights to turn off and/or the windshield wipers to become inoperable. This could affect driver visibility and decrease vehicle conspicuity, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will inspect and replace the affected ecu with an updated version.

  Show Content

• Recall 2014398 [Canada]: Electrical
  On certain vehicles, a defect in the brake light switch could cause the brake lights to become inoperative. Failure of the brake lights to illuminate when the brake pedal is depressed could result in a crash causing injury and/or property damage. Correction: dealers will replace the brake lamp switch.

  Show Content

• Recall 2014397 [Canada]: Engine
  On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.

  Show Content

• Recall 2014248 [Canada]: Powertrain
  On certain 2012 to 2014 model year vehicles, due to improper manufacturing of the oil seal boss in certain transfer assemblies, the oil seal can become out of position and allow automatic transmission fluid to enter into the transfer assembly, resulting in reduced automatic transmission fluid pressure in the transaxle. This condition would illuminate the “automatic transmission” (a/t) warning light in the instrument panel and could result in the inability to shift gears or to drive the vehicle, increasing the risk of crash causing injury and/or property damage. Correction: dealers will inspect and, if necessary, replace the transfer assembly. Note: only a limited number of 2007 to 2010 model year vehicles equipped with a replacement transfer assembly are included in the recall population.

  Show Content

• Recall 2014247 [Canada]: Steering
  Certain 2013 model year vehicles with a 6-speed automatic transmission may have been manufactured with insufficient clearance between the power steering pressure tube and the bosses on the converter housing of the automatic transaxle. This may cause the power steering pressure tube to rust from abrasive contact between the two components. In the worst case, a pin hole could develop and allow for power steering fluid leakage, which can result in the loss of power steering assist and increase the risk of crash causing injury and/or property damage. Correction: dealers will replace the power steering pressure tube and return tube. Note: only a limited number of 2007 to 2012 model year vehicles equipped with a replacement automatic transaxle with the bosses on the converter housing are included in the recall population.

  Show Content

• Recall 2009072 [Canada]: Brakes
  On certain vehicles, the brake booster check valve may stick closed when the engine is shut off. When the vehicle is re-started and put into motion, under certain driving conditions (very slow vehicle manoeuvres), there may be insufficient initial braking assist, which could temporarily increase the stopping distance. This could result in a vehicle crash causing property damage, personal injury or death. Correction: dealers will replace the brake booster check valve.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The following is a list of any known keyfobs for the Mitsubishi Outlander 2009 as well as their FCC IDs if available

• ILCO-MIT17A-PT: 2004-2010 Mitsubishi Outlander - MIT17A - Transponder Key - (PHILIPS ID 46 MITS Chip)
• RSK-MIT-A316: 2008-2021 Mitsubishi Outlander Mirage / 3-Button Smart Key / PN: 8637A316 / OUC644M-KEY-N (OEM)
  FCC ID: OUC644M-KEY-N
• RSK-ULK057: 2008-2021 Mitsubishi Outlander Mirage / 3-Button Smart Key / PN: 8637A316 / OUC644M-KEY-N (OEM Refurb)
  FCC ID: OUC644M-KEY-N

Exact problems as a recall issued on select 09 outlander on 6/25/14 for power train: automatic transmission but my vin does not match as a vehicle affected by this recall. Is there a possibility my select vehicle should have been included in this recall? I have seen many many similar complaints stating the same.

Front cradle frame assembly is rusted to the point you can see thru the large holes. Technicians recommendation frame rusted beyond repair, needs to be replaced. At a cost of $2,000

Mitsubishi outlander se front subframe crossmember cradle has corroded and will not pass inspection. The cradle is where the steering attaches and raises a safety concern should the cradle break due to the corrosion. There are many mitsubishi vehicles that have a recall on this condition, but for some reason this vehicle is not included.

Corrosion and major rust on the frame and suspension especially on the driver's side front wheel. Parts of frame and suspension just started falling off. Very similar to the problems seen on the outlander of the same year but different size engine

Tl* the contact owns a 2009 mitsubishi outlander. While driving 50 mph, the vehicle vibrated violently. The vehicle was not diagnosed or repaired. The dealer and manufacturer were not made aware of the failure. The failure mileage was 171,240.

I received a recall on my son's 2009 mitsubishi outlander for drive belt auto tensioner and sunroof glass. I have made 6 calls to their service department of brandon, fl mitsubishi and always get told a service advisor will call me back and i have not recieved a call back. I also made 1 call to the service manager. I left voicemail with the information and to call me back. I have recieved no callback. Brandon mitsubishi 9915 e adamo dr brandon, fl 33619 813-285-7783

The heater fan stopped working there's heat but blowers don't work first there's a weird winding noise then nothing no warning just stopped working

The front cross member rusted so badly that it broke off during normal driving. The frame failed at the lower a-frame on the driver's side resulting in the entire wheel/suspension assembly to fail and the vehicle crashed down to the frame and skidded along the road to stop. This is a 10 year old car that has always been kept in a garage, always parked on pavement or concrete, and has typical mileage. The vehicle was being driven normally in city traffic at the time of the failure, speed was about 30 mph.

Seat belt comes unbuckled at random times while driving the vehicle. It has happened at least a dozen times.

Common OBD-II Error Codes

• P0420 [1] Catalyst System Efficiency Below Threshold (Bank 1)
• U0141 [3] Lost Communication With Body Control Module "A"