TT200

Volume 200,
200, September,
September, 2013
2013
Volume
1992 Expo
Expo LRV
LRV
1992
flashes frequently,
frequently, or
or comes
comes on
on regardless
regardless of
of
flashes
driving
conditions,
check
the
transmission
oil
driving conditions, check the transmission oil
level is
is not
not overfull
overfull and
and check
check the
the transmission
transmission
level
oil
degradation
level
using
the
actuator
test in
in the
the
oil degradation level using the actuator test
MUT-III
(System
select
>
ELC-AT/CVT/
MUT-III (System select > ELC-AT/CVT/
TS-SST) >
> Special
Special Function)
Function) before
before other
other
TS-SST)
diagnosis.
If
you
see
a
reading
approaching
or
diagnosis. If you see a reading approaching or
exceeding
210,000,
the
transmission
oil
is
exceeding 210,000, the transmission oil is
possibly
degraded
and
requires
replacement.
possibly degraded and requires replacement.
Reset the
the transmission
transmission degradation
degradation level
level only
only
Reset
after
servicing
the
transmission.
Also,
refer
the
after servicing the transmission. Also, refer the
customer
to
the
cautions
displayed
in
their
customer to the cautions displayed in their
owner's manual,
manual, Section
Section 3:
3: Features
Features and
and Control
Control
owner's
>
CVT
>
Warning
Display,
for
future
reference.
> CVT > Warning Display, for future reference.
refer to
to the
the
Lancers, refer
For 2008
2008 and
and certain
certain 2009
2009 Lancers,
For
instructions
provided
in
TSB-10-23-005.
instructions provided in TSB-10-23-005.
page 11
Vehicle Technical
Technical Info..................
Info.................. page
 Vehicle
Tips from
from the
the Toolman................
Toolman................ page
 Tips
page 33
MEDIC Information.....................
Information.....................page
page 44
 MEDIC
Techline
Information....................
page 45
 Side
Air Dam
Template............... page
Side Air Dam
Template............... page
page 56
 Training
News..............................
page 6
Training News..............................
 MapCare
Announcement....... page 7
MapCare
Announcement....... page
page 78
 Techline
Information....................
Bulletin Review.............................
Review............................. page
page 88
 Bulletin
TT
TT
GROUP 42A
42A −
− Body
Body
GROUP
GROUP 00
00 −
− General
General
GROUP
NEW LSD
LSD GEAR
GEAR OIL
OIL (SAE
(SAE 90)
90) PART
PART NUMBER
NUMBER
NEW
—
2008-14
Lancer
Evolution
,
2009-14
Lancer
— 2008-14 Lancer Evolution , 2009-14 Lancer
Ralliart,
2010-11
Lancer
Sportback
Ralliart.
A
new
Ralliart, 2010-11 Lancer Sportback Ralliart. A new
part
number
has
been
established
for
the
subject
part number has been established for the subject
gear oil
oil to
to change
change its
its QUP
QUP (quantity
(quantity unit
unit pack).
pack).
gear
Part
number
3775610
(4
liter
can)
is
superseded
Part number 3775610 (4 liter can) is superseded
by MZ320345
MZ320345 (1
(1 quart
quart bottle).
bottle). The
The QUP
QUP of
of the
the
by
new
part
number
is
12
quarts
(1
case).
Having
new part number is 12 quarts (1 case). Having
this product
product available
available in
in smaller
smaller containers
containers
this
makes
it
easier
for
it
to
be
sold
over
the
counter.
makes it easier for it to be sold over the counter.
TT
TT
GROUP 23
23 −
− Automatic
Automatic Transmission
Transmission
GROUP
“SLOW DOWN!”
DOWN!” DISPLAYED
DISPLAYED ON
ON MID
MID —
— 2011
2011
“SLOW
&
later
Outlander
Sport/RVR,
2008
&
later
Lancer
& later Outlander Sport/RVR, 2008 & later Lancer
based vehicles
vehicles w/CVT,
w/CVT, 2008
2008 &
& later
later Outlander
Outlander with
with
based
CVT.
One
reason
the
“Slow
Down”
message
CVT. One reason the “Slow Down” message
displays on
on the
the MID
MID is
is that
that transmission
transmission
displays
temperature
may
have
risen
to
an
undesirable
temperature may have risen to an undesirable
level.
Customers
may
notice
this
while
driving
level. Customers may notice this while driving
long
distances
or
climbing
steep
grades
in high
high
long distances or climbing steep grades in
ambient
temperatures
at
freeway
speeds,
If aa
ambient temperatures at freeway speeds, If
customer
reports
seeing
this
message
and
then
customer reports seeing this message and then
having it
it turn
turn off
off after
after they
they slowed
slowed or
or stopped
stopped
having
the
vehicle,
the
system
is
functioning
as
the vehicle, the system is functioning as
designed.
If
they
report
the
warning
remains,
designed. If they report the warning remains,
MID
READS
“KEYLESS
OPERATION
MID
READS
“KEYLESS
OPERATION
SERVICE
REQUIRED”
2013-14
Outlander
SERVICE REQUIRED” 2013-14 Outlander
Sport/RVR
with
accessory
DRLs.
If
you
see the
the
Sport/RVR with accessory DRLs. If you see
subject
message,
and
diagnosing
with
the
subject message, and diagnosing with the
MUT-III
reveals
“DTC
B2419
Left
front
MUT-III reveals “DTC B2419 - Left front
antenna voltage
voltage short,”
short,” but
but the
the vehicle
vehicle starts
starts and
and
antenna
the
door
locks
function
properly,
perform
the
the door locks function properly, perform the
following
check.
following check.
Start the
the engine
engine and
and confirm
confirm that
that DRLs
DRLs are
are off
off
Start
with
the
parking
brake
set.
They
should
turn
on
with the parking brake set. They should turn on
when
the
parking
brake
is
released
and
turn
off
when the parking brake is released and turn off
again when
when the
the parking
parking brake
brake is
is reset.
reset.
again
If you
you do
do not
not get
get this
this result,
result, check
check the
the wire
wire
If
connections
in
the
driver's
side
kick
panel
area.
connections in the driver's side kick panel area.
Accessory DRLs
DRLs should
should be
be connected
connected to
to an
an LG
LG
Accessory
(light
green)
wire
at
connector
C-26,
using
(light green) wire at connector C-26, using aa
Scotch-lock connector,
connector, to
to give
give the
the system
system aa
Scotch-lock
parking
brake
input.
If
the
connection
was
parking brake input. If the connection was
incorrectly
made
to
the
LG
wire
at
connector
incorrectly made to the LG wire at connector
C-27 instead,
instead, the
the “service
“service required”
required” message
message
C-27
will
appear
and
the
DTC
will
be
set.
Repair
as
will appear and the DTC will be set. Repair as
necessary
and
recheck
for
proper
function.
necessary and recheck for proper function.
TT
TT
GROUP 51
51 −
− Exterior
Exterior
GROUP
REPLACING SIDE
SIDE AIR
AIR DAM
DAM WITH
WITH WHEEL
WHEEL
REPLACING
ARCH
MOLDINGS
—
2013-14
Outlander
Sport
ARCH MOLDINGS — 2013-14 Outlander Sport
LE.
If
replacing
the
side
air
dam
on
vehicles
with
LE. If replacing the side air dam on vehicles with
11
236540_TT Newsletter.indd 1
9/9/13 3:08 PM
wheel arch moldings, you must modify the air
Mitsubishi Multi Communication System
wheel
modify
air to Mitsubishi
System
damarch
by moldings,
drilling a you
holemust
in its
rear the
flange
InstructionMulti
bookletCommunication
provides instructions
to turn
dam
by drilling the
a hole
inarch
its rear
flange
to
Instruction
booklet chime.
provides instructions to turn
accommodate
wheel
molding
fastener.
off the warning
accommodate
the
archthis
molding
off the warning chime.
Service parts
dowheel
not have
hole. fastener.
“HERE MAPCARE PROGRAM” AN­
Service parts do not have this hole.
PROGRAM”
AN­
“HERE
MAPCARE
NOUNCEMENT
IN GLOVEBOX.
All 2014
mod­
NOUNCEMENT
IN GLOVEBOX.
All 2014 for
mod­two
els with MMCS.
This feature provides
els convenient
with MMCS.map
This
featureupdates,
providesand
for import­
two
software
convenient
map software
updates,
and import­
ant information
about how
and when
upgrades
antoccur
information
about
when
upgrades
is located
on ahow
flier and
inserted
into
the glove­
occur
located
on vehicles.
a flier inserted
into
the glove­
boxisof
affected
Please
ensure
this in­
boxformation
of affected
vehicles.
Please
in­
is in
the vehicle
at theensure
time ofthis
customer
formation
the vehicle
the
time of customer
delivery.is in
It should
alsoatbe
explained
to the cus­
delivery.
It should
be explained
the cus­
tomer during
thealso
delivery
process. to
A copy
of the
tomer
thelater
delivery
process.
flierduring
appears
in this
issue. A copy of the
flier appears later in this issue.
These upgrades also apply to dealer installed
These
upgrades
also
installed
applytotodealer
the MMES
in the
MMCS,
but do
notapply
Use the template that appears later in this issue MMCS,
apply
to
the
MMES
in the
but
do
not
2014 Mirage.
Usetothe
template drill
that appears
in this issue
accurately
the hole later
as indicated
in the 2014 Mirage.
to accurately
drill
the
hole
as
indicated
in thethe
MINI FUSES BEING USED IN SOME MODELS
photo. The template can be used on either
MINI
BEING 2014
USEDOutlander,
IN SOME 2014
MODELS
photo.
The
template
can
be
used
on
either
the
— FUSES
2012 I-MIEV,
Mirage.
left or right air dam by turning it over. After
—
2012
I-MIEV,
2014
Outlander,
2014
Mirage.
leftprinting
or right the
air template,
dam by turning
it
over.
After
New
smaller
size
“low
profile
mini
fuses”
are
make sure you measure
New
smaller
size
“low
profile
mini
fuses”
are
printing
the
template,
make
sure
you
measure
being
used
in
affected
vehicles.
They
are
the 100mm scale on the page to confirm your
being
used ininfour
affected
vehicles.
areand
theprinters
100mm accuracy.
scale on the page to confirm your
available
different
amperageThey
ratings
available
different
ratings and
printers accuracy.
listed in four
CAPS.
They amperage
are not interchangeable
A copy of the template is also available on the listed
CAPS.
Theyfuses
are not
withinthe
standard
usedinterchangeable
in other models.
A copy
the template
is tech
also resources
available on
the
MDLof
(service
> service
> Service
with
thenumbers
standardare:
fuses used in other models.
Part
MDL
(service
> service
tech resources
> Service
Related
Items
> Technical
Worksheets).
Part numbers are:
Related Items > Technical Worksheets).
 MS810891 7.5A
 MS810892 10A
TT
 MS810891 7.5A
 MS810892 10A
 MS810893 15A
 MS810894 20A
TT

MS810893
15A

MS810894 20A
GROUP 54 − Chassis Electrical
GROUP 54 − Chassis Electrical
CHIME HEARD FROM NAVIGATION SYSTEM
CHIME
HEARD
FROM —
NAVIGATION
WHILE
DRIVING
2014 ModelsSYSTEM
with new
WHILE
DRIVING
2014 Models
with new
generation
MMCS —
Navigation.
Customers
may
generation
Navigation.
may
questionMMCS
the source
of a singleCustomers
chime heard
while
question
theusually
source ofafter
a single
chime
whileThe
driving,
exiting
a heard
freeway.
driving,
after exiting
a freeway.
The
chime usually
is a warning
from the
Curve Guidance
chime
is aofwarning
fromnavigation
the Curvesystem
Guidance
feature
the MMCS
letting
feature
of the MMCS
navigation
system
the driver
know there
is a curve
in letting
the road
theahead,
driverlike
know
there
is aend
curve
in off
theramp.
road A
a turn
at the
of an
ahead,
likeGuidance”
a turn at the
end of replaces
an off ramp.
A
“Curve
indicator,
the “Speed
“Curve
Guidance”
indicator,
replaces
“Speed
Indicator
Guidance”
(posted
speedthe
limit)
in the
Indicator
Guidance”
speed limit)
in the
upper right
corner(posted
of the monitor.
For example:
upper right corner of the monitor. For example:
changes to:
changes to:
Standard
fuse
Standard
fuse
Mini
Minifuse
fuse
As a note, 30A standard fuses are also used in
As these
a note,vehicles.
30A standard
are also
used
in
Theirfuses
number
and
applied
these
vehicles.
Their
number
and
applied
circuits may vary by model and year, so make
circuits
mayuse
vary
modelfuse
andtype
year,
sure you
thebycorrect
forsoa make
circuit.
sure you use the correct fuse type for a circuit.
CANNOT
TUNE
SATELLITE
RADIO
CANNOT
SATELLITE
PREMIUMTUNE
CHANNELS
(204-220) —RADIO
All through
PREMIUM
CHANNELS
(204-220)
— All
through to
model year
2013. Customers
who
subscribe
® Premium
model
year 2013.
Customers
subscribe
to
Radiowho
Service
may report
SiriusXM
® Premium Radio Service may report
SiriusXM
they cannot
receive the premium channels.
they
cannotradio
receive
the premium
channels.
Satellite
receivers
in pre-2014
models
Satellite
receivershigher
in pre-2014
cannotradio
tune channels
than 184.models
cannot tune channels higher than 184.
TT
TT
GROUP 60 − Recalls
GROUP 60 − Recalls
ATIN-13-SR-008-A:
2013
OUTLANDER
ATIN-13-SR-008-A:
OUTLANDER
SPORT LEFT FRONT2013
STRUT SAFETY
RECALL
LEFT
FRONTSport/RVR
STRUT SAFETY
RECALL
If a customer requests the chime be turned off, SPORT
— 2013
Outlander
built from
1/17/2013
If athe
customer
chime
off,
— 2013
Outlander
Sport/RVR
built
from
1/17/2013
changerequests
can bethe
made
in be
theturned
Navigation
- 1/25/2013.
The
subject TIN
was
sent
to dealers
thesettings
changemenu
can be
made
in thePage
Navigation
subject
TIN was sent to dealers
of the
MMCS.
196 of the - 1/25/2013.
on July 23,The
2013
and states:
settings menu of the MMCS. Page 196 of the
on July 23, 2013 and states:
2
2
236540_TT Newsletter.indd 2
9/9/13 3:08 PM
“A
“A safety
safety recall
recall campaign
campaign will
will be
be released
released
today
today for
for the
the left
left front
front strut
strut installed
installed on
on
certain
built
certain 2013
2013 Outlander
Outlander Sport
Sport vehicles
vehicles built
from
from January
January 17,
17, 2013
2013 –– January
January 25,
25, 2013.
2013. Do
Do
not
not deliver
deliver any
any affected
affected 2013
2013 Outlander
Outlander
Sport
built from
from January
January 17,
17, 2013
2013 ––
Sport vehicles
vehicles built
January
January 25,
25, 2013
2013 until
until this
this recall
recall has
has been
been
performed.
performed. This
This recall
recall campaign
campaign will
will be
be
conducted
conducted in
in the
the U.S.,
U.S., Puerto
Puerto Rico
Rico and
and
Canada.
Canada. The
The Recall
Recall Bulletin
Bulletin outlining
outlining the
the
repair
repair procedure
procedure will
will be
be available
available today
today on
on
MEDIC
MEDIC and
and MDL.
MDL.
stabilizer
stabilizer link
link bracket.
bracket. If
If required,
required, the
the dealer
dealer
will
will replace
replace the
the strut.
strut.
Affected
Affected new
new vehicle
vehicle inventory
inventory VINs
VINs can
can be
be
reviewed
on
the
Mitsubishi
Dealer
Link
reviewed on the Mitsubishi Dealer Link in
in the
the
Open
Open Recalls
Recalls List
List available
available under
under the
the service
service
section
of
“e­reports.”
Dealers
must
section of “e­reports.” Dealers must review
review
the
the Warranty
Warranty Superscreen
Superscreen to
to confirm
confirm ifif any
any
vehicles
vehicles in
in their
their new
new or
or used
used vehicle
vehicle
inventories
inventories are
are affected,
affected, and
and conduct
conduct this
this
campaign
prior
to
delivering
them.
campaign prior to delivering them.
IMPORTANT
IMPORTANT
Due
Due to
to aa part
part manufacturing
manufacturing error,
error, the
the front
front
left
strut
assembly
may
have
an
improperly
left strut assembly may have an improperly
welded
welded stabilizer
stabilizer link
link bracket.
bracket. On
On affected
affected
parts,
the
bracket
may
become
disconnected
parts, the bracket may become disconnected
from
from the
the strut
strut assembly.
assembly. If
If use
use continues
continues
under
this
condition,
a
detached
under this condition, a detached bracket
bracket
could
could cause
cause damage
damage to
to the
the tire
tire and/or
and/or brake
brake
hose,
hose, which
which could
could lead
lead to
to aa greater
greater risk
risk of
of
crash.
crash.
Affected
Affected new
new or
or used
used inventory
inventory vehicles
vehicles
must
be
repaired
before
must be repaired before the
the vehicle
vehicle is
is
delivered.
delivered. Dealers
Dealers must
must check
check their
their
inventory
inventory vehicles'
vehicles' VINs
VINs on
on the
the Warranty
Warranty
Super
Screen
to
verify
whether
Super Screen to verify whether the
the vehicle
vehicle
is
is involved
involved in
in this
this recall
recall campaign.
campaign. It
It is
is aa
violation
violation of
of Federal
Federal law
law for
for aa dealer
dealer to
to
deliver
deliver aa new
new motor
motor vehicle
vehicle or
or any
any new
new or
or
used
used item
item of
of motor
motor vehicle
vehicle equipment
equipment
(including
a
tire)
(including a tire) covered
covered by
by the
the
notification
under
a
sale
or
lease
until
notification under a sale or lease until the
the
defect
defect or
or noncompliance
noncompliance is
is remedied.”
remedied.”
Dealers
Dealers are
are requested
requested to
to inspect
inspect all
all affected
affected
vehicles
to
determine
if
the
left
vehicles to determine if the left front
front strut
strut
assembly
assembly has
has an
an improperly
improperly welded
welded
TT
TT
Tips From the
Toolman
NEW
NEW SPECIAL
SPECIAL SERVICE
SERVICE TOOLS
TOOLS
FOR
2014
MIRAGE
FOR 2014 MIRAGE
A
A number
number of
of new
new special
special service
service tools
tools are
are required
required for
for proper
proper servicing
servicing and
and repair
repair of
of the
the new
new 2014
2014
Mirage.
Tools
categorized
as
“Essential”
in
the
following
chart
are
scheduled
to
be
shipped
to
Mirage. Tools categorized as “Essential” in the following chart are scheduled to be shipped to dealers
dealers
the
the week
week of
of September
September 3,
3, 2013.
2013. Tools
Tools categorized
categorized as
as “Available”
“Available” can
can be
be ordered
ordered from
from Bosch
Bosch Automotive
Automotive
Service
Solutions,
if
desired,
by
calling
1
(888)
727-6672.
Visit
the
Mitsubishi
Special
Service Solutions, if desired, by calling 1 (888) 727-6672. Visit the Mitsubishi Special Tools
Tools website
website at
at
http://mitsubishidealersolutions.com
or
click
the
SST
tab
on
your
MEDIC
to
view
the
complete
http://mitsubishidealersolutions.com or click the SST tab on your MEDIC to view the complete special
special
tools
tools catalogue.
catalogue. Tools
Tools categorized
categorized as
as “GST”
“GST” (General
(General Service
Service Tools)
Tools) are
are available
available from
from local
local tool
tool
suppliers.
Contact
Russell
Hui
([email protected])
with
special
service
tool
questions.
suppliers. Contact Russell Hui ([email protected]) with special service tool questions.
TOOL
TOOL NUMBER
NUMBER
MD998816−01
MD998816−01
STATUS
STATUS
Essential
Essential
MD998817−01
MD998817−01
MD998818-01
MD998818-01
Essential
Essential
Essential
Essential
MD998821-01
MD998821-01
MB992873−01
MB992873−01
Essential
Essential
Essential
Essential
DESCRIPTION
DESCRIPTION
Installation
Installation adaptors:
adaptors: Used
Used with
with MIT301480−A.
MIT301480−A. Removal
Removal
and
installation
of
various
bearing,
and installation of various bearing, synchronizers
synchronizers hubs
hubs
and
and gears
gears during
during F5MBD
F5MBD transmission
transmission overhaul.
overhaul.
Seal
Seal Installer
Installer Adaptor:
Adaptor: Used
Used with
with MB990938-01
MB990938-01 to
to install
install
the
the oil
oil seals
seals for
for the
the F5MBD
F5MBD manual
manual transmission.
transmission.
Necessary
Necessary to
to prevent
prevent damage
damage to
to the
the oil
oil seal
seal lip
lip and
and set
set the
the
oil
oil seal
seal to
to the
the proper
proper depth
depth in
in the
the transmission
transmission case.
case.
33
236540_TT Newsletter.indd 3
9/9/13 3:08 PM
TOOL NUMBER
STATUS
TOOL NUMBER
STATUS
MB992867-01
Essential
MB992867-01
Essential
MB992202-01/
MB992202-01/
MB992909-01
MB992909-01
Essential
Essential
MB991008
MB991008
Available
Available
MB991144
MB991144
Available
Available
MB990643
MB990643
Available
Available
MB992868
MB992868
Available
Available
MB990982
MB990982
Available
Available
MB992922
MB992922
Available
Available
MB990642
MB990642
GST
GST
MD998815
MD998815
GST
GST
MB991992
MB991992
GST
GST
MB991152
MB991152
GST
GST
MB991199
MB991199
GST
GST
DESCRIPTION
DESCRIPTION
Used in place of the spacer found in MB990998-01, this
Used
place
the
in MB990998-01,
this
toolinwill
allowoffor
thespacer
properfound
removal
of the front wheel
hub.
toolTake
will allow
for
the
proper
removal
of
the
front
wheel
hub.
care not to use the spacer found with MB990998-01
Take
care not
useblack).
the spacer
with spacers
MB990998-01
(spacer
willtobe
Whilefound
the two
are only
(spacer
will
be
black).
While
the
two
spacers
slightly different in size, use of the black spacerare
mayonly
result
slightly
different
size,
use bearing
of the black
in damage
tointhe
wheel
and spacer
tool. may result
in damage to the wheel bearing and tool.
Fuel Tank Wrench Handle and Adapter: Necessary to
Fuel
Tank Wrench
and Adapter:
Necessary
to
remove
the fuel Handle
pump module
lock ring.
Recommend
remove
the
fuel
pump
module
lock
ring.
Recommend
using the
tank wrench and adapter with a T- Handle
using
the fuel
wrenchdamage
and adapter
T- lock
Handle
Breaker
Bartank
to prevent
to thewith
tanka or
ring.
Breaker Bar to prevent damage to the tank or lock ring.
Piston Cup Installer: Used while rebuilding the wheel
Piston
CupinInstaller:
Usedbrake.
whileThe
rebuilding
the wheel
cylinder
the rear drum
tool will help
align the
cylinder
the rear
brake. The tool will help align the
pistonincups
withdrum
the piston.
piston cups with the piston.
Side Gear Holding Tool: Allows you to rotate the
Side
Gear Holding
Tool: Allowsofyou
to rotate
the in
differential
for the measurement
differential
preload
differential
for
the
measurement
of
differential
preload
in
the F5MBD manual transmission.
the F5MBD manual transmission.
Installer Base: Used to support the front suspension lower
Installer
Used tobushing
supportremoval.
the front suspension lower
controlBase:
arm during
control arm during bushing removal.
Spacer: Used with MB998375−01 for installation of the
Spacer:
Usedsuspension
with MB998375−01
for bushing.
installationAllows
of thethe
front lower
control arm
front
lower
suspension
control
arm
bushing.
Allows
the
bushing to be driven to the proper depth.
bushing to be driven to the proper depth.
Oil Sealer Installer: Used to install the the side oil seal on
Oil F1CJB
Sealer Installer:
Used to install the the side oil seal on
CVT.
F1CJB CVT.
Universal valve stem seal installer: Developed for 3A92,
Universal
valve4J12
stem engines.
seal installer:
Developed
for installers
3A92,
4B1 and
Replaces
seal
4B1
and
4J12
engines.
Replaces
seal
installers
previously specified for 4G69, 4G64, 6B31, 6G72, 6G74,
previously
6G75. specified for 4G69, 4G64, 6B31, 6G72, 6G74,
6G75.
Bearing Race installer: Used to install the tapered roller
Bearing
Race
installer:
Used
install the
tapered roller
bearing
outer
race into
thetoF5MBD
transmission
case.
bearing
outer
race
into the2 F5MBD
case.
Replace
with
a generic
3/4” flat transmission
surfaced bearing/seal
Replace
with
generic 2 3/4” flat surfaced bearing/seal
installer
(oraequivalent).
installer (or equivalent).
Used to press fit the front wheel bearing into the knuckle.
Used
to press
fit athe
front wheel
into the
knuckle.
Replace
with
generic
2 1/2” bearing
bearing/seal
installer.
Replace with a generic 2 1/2” bearing/seal installer.
Used to remove the VVT sprocket bolt during 3A92 timing
Used
to remove
VVT sprocket
during offset
3A92 timing
chain
service.theReplace
with abolt
generic
box end
chain
service.
Replace
with
a
generic
offset
box end
wrench.
wrench.
Dust Cover Installer: Used to remove the rear wheel
Dust
Cover Replace
Installer:with
Used
to remove
rear installer.
wheel
bearing.
a generic
1 3/4”the
bearing
bearing. Replace with a generic 1 3/4” bearing installer.
Oil Seal Installer used to press the front hub into the front
Oil knuckle.
Seal Installer
usedwith
to press
the front
into the
front
Replace
a generic
3/4”hub
bearing
installer.
knuckle. Replace with a generic 3/4” bearing installer.
TT
TT
Call the MEDIC Hotline for ALL MEDIC & Scan Tool hardware
Callorthe
MEDICissues.
Hotline
forTECHLINE
ALL MEDIC
Scan Tool
hardware
software
Call
for&vehicle
technical
issues.
or software
issues.
Call
TECHLINE
for
vehicle
technical
issues.
As of 8/27/13: Total Hits - 6128 Reflash Database - N13021
As MEDIC
of 8/27/13:
Total-Hits
- N13021
3 Version
3.2 - 6128 Reflash
MEDICDatabase
3 Update
- 214
MEDIC
3
Version
3.2
MEDIC
3
Update
214
MUT-III Version - 28.0
Raider Scan Tool Version - 6.0
MUT-III Version - 28.0
Raider Scan Tool Version - 6.0
MEDIC Hotline (800) 846-7575
MEDIC Hotline (800) 846-7575
4
236540_TT Newsletter.indd 4
4
9/9/13 3:08 PM
EXAMPLE OF DRILLING SIDE AIR DAM FOR WHEEL
ARCH MOLDINGS
TEMPLATE
The
The template
template can
can be
be used
used on
on either
either side
side of
of
the
vehicle
by
flipping
it
over.
the vehicle by flipping it over.
Your
Your printer
printer may
may not
not print
print the
the scale
scale below
below
at
100%.
If
your
measurement
is
greater
at 100%. If your measurement is greater
than
than 100mm,
100mm, adjust
adjust your
your printer
printer
properties
to
a
smaller
percentage
properties to a smaller percentage (e.g.
(e.g. ifif
your
your measurement
measurement is
is 102mm,
102mm, adjust
adjust your
your
printer
to
print
at
98%
of
actual
printer to print at 98% of actual size).
size). IfIf
your
your measurement
measurement is
is less
less than
than 100mm,
100mm,
adjust
to
a
percentage
larger
than
adjust to a percentage larger than 100%.
100%.
55
236540_TT Newsletter.indd 5
9/9/13 3:08 PM
TT
TT
Technical Training Schedule
Technical
Training
Schedule
September
— October,
2013
September — October, 2013
Mobile Training does not appear on these calendars. Contact your District Parts & Service Manager
Mobile
Training does
not mobile
appeartraining
on theseincalendars.
for information
about
your area.Contact your District Parts & Service Manager
for information about mobile training in your area.
East Zone - N.J. Tech Training Center
East Zone - N.J. Tech Training Center
East Zone - Atlanta Tech Training Center
East Zone - Atlanta Tech Training Center
West Zone-Dallas Tech Training Center
West Zone-Dallas Tech Training Center
California Technical Training Center
California Technical Training Center
NEWS:
NEWS:
 2014 Mirage New Model Training: Due to limited new technologies and service procedures, this
 2014
Mirage
Model
to in
limited
new technologies
and service
procedures,
course
willNew
be an
onlineTraining:
self-studyDue
book
PDF form.
Service personnel
will download
thethis
book
course
will
be
an
online
self-study
book
in
PDF
form.
Service
personnel
will
download
the
from the Mitsubishi Academy (www.mitsubishiacademy.com). The book contains a quiz tobook
test the
from
the Mitsubishi
Academy
(www.mitsubishiacademy.com).
The book contains a quiz to test the
technicians
knowledge
of the
course.
technicians
knowledge
of
the
course.
 The 2014 Outlander Service Web Training Course is now available for Service Managers and Service
 TheAdvisors.
2014 Outlander
Course
available for for
Service
and Service
The Service
course Web
codeTraining
is 130601
and isisnow
a requirement
the Managers
2013 Diamond
Quality
Advisors.
The
course
code
is
130601
and
is
a
requirement
for
the
2013
Diamond
Quality
Management and Diamond Certification Recognition Programs. Log on to mitsubishiacademy.com
Management
andthis
Diamond
Certification
and complete
important
training. Recognition Programs. Log on to mitsubishiacademy.com
and complete this important training.
6
236540_TT Newsletter.indd 6
6
9/9/13 3:08 PM
77
236540_TT Newsletter.indd 7
9/9/13 3:08 PM
TT
TECHLINE
TECHLINE
(800) 446-6064
(800) 446-6064
TT
HOURS:
HOURS:
Monday — Friday
Monday — Friday
6:30 − 11:30 am & 12:30 − 3:30 pm
6:30
11:30 are
am Pacific
& 12:30Time
− 3:30 pm
All− times
All
times
are
Pacific
Time
NOTE: Techline is closed every THURSDAY from
NOTE:
is closed
every
from
9:30 Techline
- 10:30 A.M
(Pacific)
for THURSDAY
a staff meeting.
9:30 - 10:30 A.M (Pacific) for a staff meeting.
TT
TT
The following information was recently released:
The following information was recently released:
Number
Number
TSB-11-00-007
TSB-11-00-007
Title
Vehicles
Title
Vehicles
All 2014 Models
General PDI Procedures for
General
Procedures
for
All 2014 Models
2014 PDI
Models
- Revised
2014 Models - Revised
Subject
Subject
Revises TSB-11-00-007 to
Revises
TSB-11-00-007
to Belt
update
MMES, Rear Seat
update
Rear Seat Belt
andMMES,
other information.
and other information.
2014 Lancer & Lancer
Revises TSB-11-00-011 to
TSB-11-00-011REV
New Model Service
TSB-11-00-011REV
NewInformation
Model Service
Lancer & Lancer
Revises
TSB-11-00-011
update
information to
regarding
and Features 2014Sportback
Information
Sportback
update
information regarding
MMES
-Revisedand Features
-Revised
MMES
2014 Lancer Evolution
Revises TSB-11-00-012 to
TSB-11-00-012REV
New Model Service
TSB-11-00-012REV
NewInformation
Model Service
Revises
TSB-11-00-012
to
update
information regarding
and Features 2014 Lancer Evolution
Information
update
information regarding
MMES
-Revisedand Features
-Revised
MMES
2014 Outlander
Revises TSB-11-00-012 to
TSB-11-00-014REVII
New Model Service
TSB-11-00-014REVII
NewInformation
Model Service
Revises
TSB-11-00-012
update
MMES, Rearto
Seat Belt
and Features 2014 Outlander
Information
update
Rear Seat Belt
andMMES,
other information.
-Revisedand Features
-Revised
and other information.
2014 Outlander Sport
Revises TSB-11-00-015 to
TSB-11-00-015REV
New Model Service
TSB-11-00-015REV
NewInformation
Model Service
Revises
TSB-11-00-015
to
update
information regarding
and Features 2014 Outlander Sport
Information
update
information regarding
MMES
-Revisedand Features
-Revised
MMES
2014 Outlander
Updates compression
TSB-13-11-007
Updated Compression Test
TSB-13-11-007
Updated
Compression
Updates
compression
specification
pressure difference
Specifications
(4J12 Test
Engine) 2014 Outlander
Specifications
(4J12 Engine)
specification
pressure difference
specification.
- SMR
- SMR
specification.
Updates pin connection numbers
TSB-13-17-001
EGR Control Circuits
2004-12 Endeavor, 2004-12
TSB-13-17-001
EGRCorrected-SMR
Control Circuits
2004-12
Endeavor,
Updates
connection
at the pin
EGR
valve. numbers
Galant,
2006-122004-12
Eclipse,
Corrected-SMR
Galant,
2006-12
Eclipse,
at the EGR valve.
2007-12
Eclipse
Spyder
2007-12 Eclipse Spyder
TSB-13-51-003
Liftgate Paint Peeling at
2011-13 Outlander
Provide instructions to repair
TSB-13-51-003
Liftgate
Paint
Peeling at
2011-13
Outlander
Provide
instructions
to repair
Spoiler
Ends
Sport/RVR
paint damage
and install
prevent­
Spoiler Ends
Sport/RVR
paint
damage
and install
ative
protectors
to theprevent­
spoiler.
ative protectors to the spoiler.
� Copyright 2013 Mitsubishi Motors North America, Inc.
� Copyright 2013 Mitsubishi Motors North America, Inc.
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link,
The information contained in MEDIC,
this bulletin
is subject
to change.
the latestwebsite
version(www.mitsubishitechinfo.com)
of this document, go to the Mitsubishi
Dealer Link,
or the
Mitsubishi
ServiceFor
Information
.
MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
8
236540_TT Newsletter.indd 8
8
9/9/13 3:08 PM