Mitsubishi Lancer Evolution 2010

• Recall 153120 [USA]: A detached front control arm can result in a loss of vehicle control, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2008-2010 lancer, 2009-2010 lancer sportback, 2008-2013 outlander, and 2011-2016 outlander sport vehicles originally sold in, or ever registered in, connecticut, delaware, the district of columbia, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, and wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.
  mmna will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one. These repairs will be performed free of charge. The recall began august 7, 2020. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-20-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 129535 [USA]: If the drive belt detaches, the battery will discharge and the engine will stall, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2009-2012 lancer, 2008-2012 outlander, 2010-2012 lancer sportback, and 2011-2012 outlander sport vehicles equipped with either a 4b11 or 4b12 engine. The drive belt automatic tensioner flange may crack, allowing the accessory drive belt to detach.
  mmna will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin march 27, 2018. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-18-001.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 134631 [USA]: If the sunroof glass detaches from the assembly while driving, it can become a road hazard, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2007-2010 outlander, 2008-2010 lancer, 2009-2010 lancer evolution, and 2010 lancer sportback vehicles equipped with sunroofs. The sunroof glass may detach from the sunroof assembly, becoming a road hazard to other vehicles.
  mmna will notify owners, and dealers will replace the sunroof glass assembly, free of charge. The recall began on february 27, 2018. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-18-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 111348 [USA]: Failure of the blower motor may reduce the performance of the windshield defroster, diminishing the driver's visibility and increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2011 lancer vehicles manufactured march 16, 2009, to march 30, 2011, 2010-2011 lancer sportback vehicles manufactured june 17, 2009, to december 1, 2010, 2010-2011 lancer evolution vehicles manufactured july 14, 2009, to january 7, 2011, 2009-2011 outlander vehicles manufactured february 10, 2009, to june 22, 2011, and 2011 outlander sport vehicles manufactured august 26, 2010, to november 19, 2010. In the affected vehicles, the blower motor may fail.
  mitsubishi will notify owners, and dealers will replace a suspect blower motor, free of charge. The recall began on june 15, 2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 113258 [USA]: Unstable voltage could result in intermittent failure of the vehicle's head lights, tail lights, and windshield wipers. if the headlights and/or windshield wipers fail, the driver could have reduced visibility. if the tail lights fail, the vehicle could be less visible. either condition increases the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2010 mitsubishi lancer vehicles manufactured january 12, 2009, to july 6, 2010, 2009-2010 outlander vehicles manufactured january 12, 2009, to august 27, 2010, 2010 lancer sportback vehicles manufactured june 17, 2009, to june 8, 2010, and 2010 lancer evolution vehicles manufactured july 14, 2009, to august 4, 2010. The affected vehicles have an electronic control unit (ecu) that controls the head lights, tail lights, and windshield wipers. Due to a manufacturing error, the voltage inside this ecu may be unstable.
  mitsubishi will notify owners, and dealers will replace the affected ecu, free of charge. The recall began on june 15 ,2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-002.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 111349 [USA]: Failure of the blower motor may reduce the performance of the windshield defroster, diminishing the driver's visibility and increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2011 lancer vehicles manufactured march 16, 2009, to march 30, 2011, 2010-2011 lancer sportback vehicles manufactured june 17, 2009, to december 1, 2010, 2010-2011 lancer evolution vehicles manufactured july 14, 2009, to january 7, 2011, 2009-2011 outlander vehicles manufactured february 10, 2009, to june 22, 2011, and 2011 outlander sport vehicles manufactured august 26, 2010, to november 19, 2010. In the affected vehicles, the blower motor may fail.
  mitsubishi will notify owners, and dealers will replace a suspect blower motor, free of charge. The recall began on june 15, 2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 113259 [USA]: Unstable voltage could result in intermittent failure of the vehicle's head lights, tail lights, and windshield wipers. if the headlights and/or windshield wipers fail, the driver could have reduced visibility. if the tail lights fail, the vehicle could be less visible. either condition increases the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2010 mitsubishi lancer vehicles manufactured january 12, 2009, to july 6, 2010, 2009-2010 outlander vehicles manufactured january 12, 2009, to august 27, 2010, 2010 lancer sportback vehicles manufactured june 17, 2009, to june 8, 2010, and 2010 lancer evolution vehicles manufactured july 14, 2009, to august 4, 2010. The affected vehicles have an electronic control unit (ecu) that controls the head lights, tail lights, and windshield wipers. Due to a manufacturing error, the voltage inside this ecu may be unstable.
  mitsubishi will notify owners, and dealers will replace the affected ecu, free of charge. The recall began on june 15 ,2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-002.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 105447 [USA]: If the drive belt detaches, the battery may discharge, resulting in an engine stall, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2008-2011 lancer, lancer evolution, and outlander; 2009-2011 lancer sportback, lancer rilliart, and lancer sportback ralliart; and 2011 outlander sport vehicles. The affected vehicles, manufactured with 4b1 engines, have an engine pulley and belt arrangement for turning the alternator, the cooling fan and the power steering pump (if equipped). These pulleys may experience unusual wear and allow for belt detachment.
  mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on october 15, 2014. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-14-009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 98518 [USA]: Failure of the clutch master cylinder reduces the ability to shift the vehicle into or out of gear, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2008-2013 lancer evolution vehicles manufactured from december 12, 2007, through march 5, 2013. In the affected vehicles, the clutch master cylinder can fail.
  mitsubishi will notify owners, and dealers will replace the affected clutch master cylinders free of charge. The recall began on november 12, 2013. Owners may contact mitsubishi at 1-888-648-7820. Mitsubishi's campaign number for this recall is sr-13-009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall R/2015/157 [UK]: Ecu malfunction may cause systems to become inoperable
  During operation the headlights and or the windscreen wipers amongst other systems may become inoperable as a result a none conformity in the electronic time & alarm system (etacs) ecu.
  recall the vehicles that are likely to be affected and check the production date of the etacs ecu. The etacs ecu will be replaced if it is within the affected production dates.

  Show Content

• Recall 2020216 [Canada]: Structure
  Issue: on certain vehicles, road salt can corrode the front cross-member (subframe). As a result, a lower control arm could eventually detach from the cross-member. This could cause a loss of vehicle control. Safety risk: a loss of control can create the risk of a crash. Corrective actions: mitsubishi will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front cross-member (subframe). If no significant corrosion is found, the dealer will spray a sealing and anti-corrosion coating both inside and on the cross-member. If significant corrosion is found, the dealer will replace the cross-member.

  Show Content

• Recall 2018588 [Canada]: Visual system
  On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the wiper link rod with a countermeasure one, and will replace the wiper motor crank arm with a new one.

  Show Content

• Recall 2018054 [Canada]: Accessories
  On certain vehicles, the sunroof may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: dealers will replace the sunroof glass assembly.

  Show Content

• Recall 2018052 [Canada]: Electrical
  On certain vehicles, the flange of the drive belt automatic tensioner may crack over time due to repetitive high load operations and stress concentration. This could cause the drive belt to detach, leading to battery depletion, which would result in a loss of motive power and a loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the auto tensioner with a countermeasure unit.

  Show Content

• Recall 2016382 [Canada]: Airbag
  On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.

  Show Content

• Recall 2015166 [Canada]: Heater and defroster
  On certain vehicles, the blower motor may have been incorrectly manufactured. This could result in a premature failure of the blower motor which could affect the defroster performance resulting in reduced visibility, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will replace blower motor and the power transistor as needed.

  Show Content

• Recall 2015165 [Canada]: Lights and instruments
  On certain vehicles, the ecu which controls the head lights, tail lights and windshield wipers may have been improperly manufactured. This could cause the voltage in the ecu to become unstable and cause the head lights and/or tail lights to turn off and/or the windshield wipers to become inoperable. This could affect driver visibility and decrease vehicle conspicuity, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will inspect and replace the affected ecu with an updated version.

  Show Content

• Recall 2014397 [Canada]: Engine
  On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.

  Show Content

• Recall 2018588 [Canada]: Visual system
  On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the wiper link rod with a countermeasure one, and will replace the wiper motor crank arm with a new one.

  Show Content

• Recall 2018054 [Canada]: Accessories
  On certain vehicles, the sunroof may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: dealers will replace the sunroof glass assembly.

  Show Content

• Recall 2016382 [Canada]: Airbag
  On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.

  Show Content

• Recall 2015166 [Canada]: Heater and defroster
  On certain vehicles, the blower motor may have been incorrectly manufactured. This could result in a premature failure of the blower motor which could affect the defroster performance resulting in reduced visibility, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will replace blower motor and the power transistor as needed.

  Show Content

• Recall 2015165 [Canada]: Lights and instruments
  On certain vehicles, the ecu which controls the head lights, tail lights and windshield wipers may have been improperly manufactured. This could cause the voltage in the ecu to become unstable and cause the head lights and/or tail lights to turn off and/or the windshield wipers to become inoperable. This could affect driver visibility and decrease vehicle conspicuity, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will inspect and replace the affected ecu with an updated version.

  Show Content

• Recall 2014397 [Canada]: Engine
  On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.

  Show Content

• Recall 2013316 [Canada]: Powertrain
  On certain vehicles, the clutch master cylinder may fail, resulting in an inability to disengage the clutch or to shift gears. This could result in unintended vehicle movement, increased stopping distances and engine stalling. Such an occurrence could increase the risk of a crash causing injury or property damage. Correction: dealers will replace the clutch master cylinder.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

All mitsubishi lancer evolution x models are having problems with the ayc acd pumps, this affects the stability and the handling of the vehicle specially in bad weather conditions because the system doesn't work properly in case of a slippery or bad road. The problem with this pumps begin with it's location because it receives dirt,water, snow and other elements that harm the pump. This should have a recall from mitsubishi because it failed due to a bad design and location of it and it can cause serious problems for drivers specially in bad weather conditions, i will like this concern could be taken in consideration for all of us that are mitsubishi lancer evolution owners, thanks

All mitsubishi lancer evolution x models are having problems with the ayc acd pumps, this affects the stability and the handling of the vehicle specially in bad weather conditions because the system doesn't work properly in case of a slippery or bad road. The problem with this pumps begin with it's location because it receives dirt,water, snow and other elements that harm the pump. This should have a recall from mitsubishi because it failed due to a bad design and location of it and it can cause serious problems for drivers specially in bad weather conditions, i will like this concern could be taken in consideration for all of us that are mitsubishi lancer evolution owners, thanks

The mitsubishi dealer told me they couldn't fix one of the recalls because it was an "after market part". *tr

The mitsubishi dealer told me they couldn't fix one of the recalls because it was an "after market part". *tr

Hello nhtsa, i have a 2011 mitsubishi lancer ralliart sportback. I have just came across a crack in my exhaust manifold which is causing exhaust fumes to enter the cabin of the vehicle if my windows are up. I don't seem to be the only person with this type of car/engine that has a crack in the exhaust manifold. My car is not modified in any way that effects the performance that could cause such a crack to happen. This also appears to be the case for several thousand others. I have brought my vehicle into mitsubishi who has confirmed the crack and has not been able to explain to me why or how this happened. I have been told from my local mitsubishi dealership and the next closest one that they can replace the manifold for $2k. I have contacted mitsubishi usa who has told me the exhaust manifold shouldn't crack and has gotten no other complaints about the issue. There are several thousand posts with photo proof that i am not alone with this issue. Mitsubishi has had a similar issue with their all wheel drive pump where there was a defect of some sort and extended the warranty to 100,000k. I have already had my all wheel drive pump fail and replaced under that warranty. When i spoke with mitsubishi usa a supervisor named jennifer informed me to put in a complaint here. Since mitsubishi has not had any internal testing on the manifold going this route may speed the process up. This issue is quite serious since with the crack - photo attached: it causes carbon monoxide to enter the cabin if the windows are up or if the ac is on and the car is at a stand still. Thank you for your time.

Tl* the contact owns a 2010 mitsubishi lancer evolution. While driving highway speeds above 40 mph, the vehicle became very unstable and 'four wheel drive disabled' displayed. The vehicle was taken to nimay mitsubishi (1011 kennedy ave, kilometer 2.5, 787-622-0200) where it was diagnosed that the all wheel control hydraulic unit failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 41,000.

My abs and asc lights have been on for a while. Took it to a mechanic and was told it wasnt a problem, just a faulty electrical system. One day, i was coming off an exit ramp trying to brake so i could turn but my brakes wouldnt engage so i slam on my brake and they locked up and my car slid and crashed into a median. Tired to steer away but it wouldnt turn.

My abs and asc lights have been on for a while. Took it to a mechanic and was told it wasnt a problem, just a faulty electrical system. One day, i was coming off an exit ramp trying to brake so i could turn but my brakes wouldnt engage so i slam on my brake and they locked up and my car slid and crashed into a median. Tired to steer away but it wouldnt turn.

Tl* the contact owns a 2010 mitsubishi lancer. While driving highway speeds, the sun roof assembly fractured without warning. There were no injuries. The manufacturer was notified. The dealer was not contacted. The vehicle was not diagnosed or repaired. The failure mileage was not available.

Common OBD-II Error Codes

• P061A [1] Internal Control Module Torque Performance
• P1241 [1] Fuel Pump Control Out Of Range
• P0068 [1] MAP/MAF - Throttle Position Correlation
• P1235 [1] Fuel Pump Low Speed Malfunction
• P0012 [1] "A" Camshaft Position - Timing Over-Retarded (Bank 1)
• P0420 [1] Catalyst System Efficiency Below Threshold (Bank 1)
• U0141 [3] Lost Communication With Body Control Module "A"
• P0016 [1] Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
• P0017 [1] Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)
• C161E [3] C161E