Mitsubishi Fuso Fe84d 2008

• Recall 126967 [USA]: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
  Mitsubishi fuso truck of america, inc. (mfta) is recalling certain 2004-2017 fe84d, fe85d, fec52, fec72, fec92, fgb72, fk61f and fm657 trucks. These trucks are equipped with kidde plastic-handle or push button 'pindicator' fire extinguishers that may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.Nhtsa.Gov/odi/rcl/2017/rmisc-17e062-5427.Pdf
  mfta will notify owners, instructing them to contact kidde for a replacement fire extinguisher, free of charge. The recall began on january 11, 2018. Owners may contact mfta customer service at 1-877-711-0707, or kidde customer service toll-free at 1-855-262-3540, or online at www.Kidde.Com and click on "product safety recall" for more information. Mfta's number for this recall is mfv00001.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 73882 [USA]: If water permeates during normal vehicle operation, the connector terminals could become corroded. this corrosion could affect the hydraulic motor circuit in such a manner that the motor would operate continuously, causing the motor to overheat and potentially result in a fire.
  Mitsubishi fuso (mfta) is recalling certain model year 2008 through 2010 fe83d, fe84d, and fg84d trucks manufactured from april 13, 2007 through december 24, 2009. The ground wire on affected vehicles equipped with an anti-lock brake system is positioned in such a manner that water could enter the wire casing and travel to the abs hydraulic unit connector.
  mfta will notify owners and replace the ground sub harness with a waterproof harness free of charge. The safety recall began on august 4, 2010. Owners may contact mfta at 1-856-467-4500.
  mfta's recall campaign number is C1004210.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 74343 [USA]: All of the rubber cushions could crack, allowing the air intake duct to fall off of the truck increasing the risk of crash.
  Mitsubishi fuso is recalling certain model year 2005 through 2010 fe83d, fe84d, fe85d and fg84d vehicles. The weather resistance properties of the air intake duct rubber cushions is insufficient. During normal vehicle operation, the rubber cushions deteriorate and crack, causing abnormal noise.
  dealers will replace all of the air intake duct rubber cushions with components manufactured to proper specifications. This remedy will be performed free of charge. The safety recall began on february 19, 2010. Owners may contact mitsubishi fuso at 1-856-467-4500.
  mitsubishi recall no. C1004110.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 77803 [USA]: In this condition, expansion and contraction of the turbocharger housing mounting boss during normal engine operation may cause thermal fatigue of the turbocharger housing. the turbocharger housing may crack, releasing exhaust gases that could cause a fire.
  Mitsubishi fuso is recalling 2,957 my 2008 fe83d, fe84d, fe85d, and fg84d trucks. The bolt holes in the turbocharger bracket, where the turbocharger is affixed, were manufactured with insufficient clearance. Stress is placed on the mounting boss when the bracket is affixed to the turbocharger, due to insufficient clearance between the affixing bolts and bracket holes.
  dealers will replace the bracket. The recall began on october 10, 2008. Owners may contact mitsubishi fuso at 1-856-467-4500.
  mitsubishi fuso recall no. C1003710.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 2010176 [Canada]: Brakes
  On certain trucks equipped with an anti-lock brake system (abs), water could enter the ground wire casing and travel to the abs hydraulic unit connector. If water invasion occurs, the connector terminals could become corroded, which could affect the hydraulic motor circuit in a manner that the motor would operate continuously. This could cause the hydraulic motor to overheat and catch on fire, which could result in property damage, personal injury or death. Correction: dealers will replace the ground wiring sub harness and inspect the abs hydraulic unit for corrosion. If corrosion exists, the unit will be replaced.

  Show Content

• Recall 2009325 [Canada]: Other
  On certain trucks, the rubber cushions - which fasten the air intake duct to the rear of the cab - may fail. This could allow the air intake duct to detach during vehicle operation. An errant intake duct could strike a vehicle, property, or a bystander, which could result in property damage, personal injury or death. Correction: dealers will replace the air intake duct rubber cushions.

  Show Content

• Recall 2008284 [Canada]: Other
  On certain vehicles, the turbocharger mounting bracket may have misaligned bolt holes which could lead to cracking in the turbocharger housing. Exhaust gases could be released from the cracked turbocharger housing and potentially cause a fire and personal injury. Correction: dealers will inspect and replace affected item with a bracket manufactured to proper specs.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.