Mitsubishi Lancer Evolution 2009

• Recall 153112 [USA]: A detached front control arm can result in a loss of vehicle control, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2008-2010 lancer, 2009-2010 lancer sportback, 2008-2013 outlander, and 2011-2016 outlander sport vehicles originally sold in, or ever registered in, connecticut, delaware, the district of columbia, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, and wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.
  mmna will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one. These repairs will be performed free of charge. The recall began august 7, 2020. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-20-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 129533 [USA]: If the drive belt detaches, the battery will discharge and the engine will stall, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2009-2012 lancer, 2008-2012 outlander, 2010-2012 lancer sportback, and 2011-2012 outlander sport vehicles equipped with either a 4b11 or 4b12 engine. The drive belt automatic tensioner flange may crack, allowing the accessory drive belt to detach.
  mmna will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin march 27, 2018. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-18-001.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 134628 [USA]: If the sunroof glass detaches from the assembly while driving, it can become a road hazard, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mmna) is recalling certain 2007-2010 outlander, 2008-2010 lancer, 2009-2010 lancer evolution, and 2010 lancer sportback vehicles equipped with sunroofs. The sunroof glass may detach from the sunroof assembly, becoming a road hazard to other vehicles.
  mmna will notify owners, and dealers will replace the sunroof glass assembly, free of charge. The recall began on february 27, 2018. Owners may contact mmna customer service at 1-888-648-7820. Mmna's number for this recall is sr-18-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 111346 [USA]: Failure of the blower motor may reduce the performance of the windshield defroster, diminishing the driver's visibility and increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2011 lancer vehicles manufactured march 16, 2009, to march 30, 2011, 2010-2011 lancer sportback vehicles manufactured june 17, 2009, to december 1, 2010, 2010-2011 lancer evolution vehicles manufactured july 14, 2009, to january 7, 2011, 2009-2011 outlander vehicles manufactured february 10, 2009, to june 22, 2011, and 2011 outlander sport vehicles manufactured august 26, 2010, to november 19, 2010. In the affected vehicles, the blower motor may fail.
  mitsubishi will notify owners, and dealers will replace a suspect blower motor, free of charge. The recall began on june 15, 2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-003.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 113256 [USA]: Unstable voltage could result in intermittent failure of the vehicle's head lights, tail lights, and windshield wipers. if the headlights and/or windshield wipers fail, the driver could have reduced visibility. if the tail lights fail, the vehicle could be less visible. either condition increases the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2009-2010 mitsubishi lancer vehicles manufactured january 12, 2009, to july 6, 2010, 2009-2010 outlander vehicles manufactured january 12, 2009, to august 27, 2010, 2010 lancer sportback vehicles manufactured june 17, 2009, to june 8, 2010, and 2010 lancer evolution vehicles manufactured july 14, 2009, to august 4, 2010. The affected vehicles have an electronic control unit (ecu) that controls the head lights, tail lights, and windshield wipers. Due to a manufacturing error, the voltage inside this ecu may be unstable.
  mitsubishi will notify owners, and dealers will replace the affected ecu, free of charge. The recall began on june 15 ,2015. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-15-002.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 105441 [USA]: If the drive belt detaches, the battery may discharge, resulting in an engine stall, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2008-2011 lancer, lancer evolution, and outlander; 2009-2011 lancer sportback, lancer rilliart, and lancer sportback ralliart; and 2011 outlander sport vehicles. The affected vehicles, manufactured with 4b1 engines, have an engine pulley and belt arrangement for turning the alternator, the cooling fan and the power steering pump (if equipped). These pulleys may experience unusual wear and allow for belt detachment.
  mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on october 15, 2014. Owners may contact mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is sr-14-009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 98517 [USA]: Failure of the clutch master cylinder reduces the ability to shift the vehicle into or out of gear, increasing the risk of a crash.
  Mitsubishi motors north america, inc. (mitsubishi) is recalling certain model year 2008-2013 lancer evolution vehicles manufactured from december 12, 2007, through march 5, 2013. In the affected vehicles, the clutch master cylinder can fail.
  mitsubishi will notify owners, and dealers will replace the affected clutch master cylinders free of charge. The recall began on november 12, 2013. Owners may contact mitsubishi at 1-888-648-7820. Mitsubishi's campaign number for this recall is sr-13-009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 73352 [USA]: This coating over time may cause corrosion of the sensor. in the event of a vehicle crash of the type that would deploy the airbags this type of short-circuit may cause a delay in the deployment of the airbags which could result in driver or passenger injury.
  Mitsubishi is recalling model year 2008-2009 lancer and lancer evolution vehicles originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, wisconsin and district of columbia. In areas where heavy road salt is used in the winter, a long term exposure to a mixture of melted snow with salt thrown up by the other vehicles on the road may cause a water-salt mixture to adhere to the front impact sensors.
  dealers will install new front airbag sensors that have improved corrosion resistance. This service will be performed free of charge. The safety recall began on november 27, 2009. Owners may contact mitsubishi customer relations department at 1-888-648-7820.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 67462 [USA]: If this stress crack develops, fuel leakage may occur. fuel leakage, in the presence of an ignition source, could result in a fire.
  Mitsubishi is recalling model year 2008-2009 lancer evolution, ralliart, and sportback ralliart vehicles equipped with turbocharged engines. The manner in which the fuel return pipe is attached to the engine, in combination with frequent vehicle operation at certain engine revolutions, may result in a resonance that, if continued over time, may cause a stress crack to develop at the fixed portion of the fuel pipe.
  the fuel return pipe will be replaced with a new part and two additional attachment brackets will be installed to better control fuel pipe vibration. This service will be performed free of charge. The recall began on september 29, 2009. Owners may contact mitsubishi at 1-888-648-7820.
  mitsubishi's recall campaign number is sr-09-004.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 67260 [USA]: This may temporarily increase the stopping distance of the vehicle and therefore increase the risk of a crash.
  Mitsubishi is recalling 39,711 my 2008-2009 outlander and lacer vehicles. Incorrect material composition of the brake booster check valve may cause the check valve to stick closed when the engine is shut off. When the vehicle is re-started and put into motion, under certain driving conditions (very slow vehicle maneuvers), there may be insufficient initial braking assist.
  dealers will replace the brake booster check valve free of charge. The recall is expected to begin during april 2009. Owners may contact mitsubishi at 1-800-222-0037.
  mitsubishi recall no. Sr-09-002.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall R/2014/124 [UK]: Loss of power steering assistance
  Due to the use of inappropriate material for the drive belt on the 4b1 petrol engine the nylon idler pulley(s) may wear at an angle. If this continues under this condition the drive belt will be forced off the pulleys. This can lead to battery depletion overheating and on vehicles with hydraulic power steering the steering effort will increase.
  replace drive belt. Check and if necessary replace idler pulley(s)

  Show Content

• Recall R/2009/038 [UK]: Lack of brake servo assistance
  It has been identified that after the vehicle has been stationary for some length of time increased pressure may need to be applied to the footbrake pedal to bring the vehicle to a stop. This is due to insufficient vacuum assistance within the brake booster due to a failure of the check valve. It should be noted that on the second application of the footbrake the check valve will operate as designed and the brakes will operate as normal.
  recalled vehicles will have the brake booster check valve replaced.

  Show Content

• Recall R/2014/124 [UK]: Loss of power steering assistance
  Due to the use of inappropriate material for the drive belt on the 4b1 petrol engine the nylon idler pulley(s) may wear at an angle. If this continues under this condition the drive belt will be forced off the pulleys. This can lead to battery depletion overheating and on vehicles with hydraulic power steering the steering effort will increase.
  replace drive belt. Check and if necessary replace idler pulley(s)

  Show Content

• Recall R/2015/157 [UK]: Ecu malfunction may cause systems to become inoperable
  During operation the headlights and or the windscreen wipers amongst other systems may become inoperable as a result a none conformity in the electronic time & alarm system (etacs) ecu.
  recall the vehicles that are likely to be affected and check the production date of the etacs ecu. The etacs ecu will be replaced if it is within the affected production dates.

  Show Content

• Recall 2020216 [Canada]: Structure
  Issue: on certain vehicles, road salt can corrode the front cross-member (subframe). As a result, a lower control arm could eventually detach from the cross-member. This could cause a loss of vehicle control. Safety risk: a loss of control can create the risk of a crash. Corrective actions: mitsubishi will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the front cross-member (subframe). If no significant corrosion is found, the dealer will spray a sealing and anti-corrosion coating both inside and on the cross-member. If significant corrosion is found, the dealer will replace the cross-member.

  Show Content

• Recall 2018588 [Canada]: Visual system
  On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the wiper link rod with a countermeasure one, and will replace the wiper motor crank arm with a new one.

  Show Content

• Recall 2018054 [Canada]: Accessories
  On certain vehicles, the sunroof may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: dealers will replace the sunroof glass assembly.

  Show Content

• Recall 2018052 [Canada]: Electrical
  On certain vehicles, the flange of the drive belt automatic tensioner may crack over time due to repetitive high load operations and stress concentration. This could cause the drive belt to detach, leading to battery depletion, which would result in a loss of motive power and a loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the auto tensioner with a countermeasure unit.

  Show Content

• Recall 2016382 [Canada]: Airbag
  On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.

  Show Content

• Recall 2015166 [Canada]: Heater and defroster
  On certain vehicles, the blower motor may have been incorrectly manufactured. This could result in a premature failure of the blower motor which could affect the defroster performance resulting in reduced visibility, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will replace blower motor and the power transistor as needed.

  Show Content

• Recall 2015165 [Canada]: Lights and instruments
  On certain vehicles, the ecu which controls the head lights, tail lights and windshield wipers may have been improperly manufactured. This could cause the voltage in the ecu to become unstable and cause the head lights and/or tail lights to turn off and/or the windshield wipers to become inoperable. This could affect driver visibility and decrease vehicle conspicuity, increasing the risk of a crash causing injury and/or damage to property. Correction: dealers will inspect and replace the affected ecu with an updated version.

  Show Content

• Recall 2014397 [Canada]: Engine
  On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.

  Show Content

• Recall 2009072 [Canada]: Brakes
  On certain vehicles, the brake booster check valve may stick closed when the engine is shut off. When the vehicle is re-started and put into motion, under certain driving conditions (very slow vehicle manoeuvres), there may be insufficient initial braking assist, which could temporarily increase the stopping distance. This could result in a vehicle crash causing property damage, personal injury or death. Correction: dealers will replace the brake booster check valve.

  Show Content

• Recall 2009317 [Canada]: Airbag
  On certain vehicles operated in areas of heavy road salt usage, the front impact sensors may corrode between the sensor bushing and sensor bracket. Over time, the corrosion may cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. This could result in delayed deployment of the driver and passenger front airbags during a vehicle crash, increasing the risk of personal injuries or death. Correction: dealers will replace the front impact sensors.

  Show Content

• Recall 2018588 [Canada]: Visual system
  On certain vehicles, water may drain from the windshield cowl area onto the front wiper link ball joint. Over time, this could result in corrosion and/or wear to the joint, which could result in the separation of the wiper link ball. If separation were to occur, the windshield wipers could become inoperative, which could limit the driver’s visibility under certain operating conditions which may increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the wiper link rod with a countermeasure one, and will replace the wiper motor crank arm with a new one.

  Show Content

• Recall 2018054 [Canada]: Accessories
  On certain vehicles, the sunroof may not have been bonded properly and could separate from the vehicle. This could pose a risk to other road users, increasing the risk of injury and/or damage to property. Correction: dealers will replace the sunroof glass assembly.

  Show Content

• Recall 2016382 [Canada]: Airbag
  On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.

  Show Content

• Recall 2014397 [Canada]: Engine
  On certain vehicles, the drive belt material may cause abnormal pulley wear. If the vehicle is driven under this condition, the drive belt may become damaged from the worn pulley and detach, affecting electrical charging system and cooling system function and would illuminate the engine warning lamp(s) on the instrument panel. This could result in battery depletion and an overheated engine, resulting in a loss of motive power. Vehicles equipped with a hydraulic power steering system could also experience loss of power steering assist. These issues could increase the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the drive belt, and the pulley will be replaced if it is found worn beyond a certain level.

  Show Content

• Recall 2013316 [Canada]: Powertrain
  On certain vehicles, the clutch master cylinder may fail, resulting in an inability to disengage the clutch or to shift gears. This could result in unintended vehicle movement, increased stopping distances and engine stalling. Such an occurrence could increase the risk of a crash causing injury or property damage. Correction: dealers will replace the clutch master cylinder.

  Show Content

• Recall 2009260 [Canada]: Fuel supply
  On certain vehicles, the fuel return pipe may develop stress cracking, under certain conditions, allowing a fuel leak to occur. Fuel leakage in the presence of an ignition source could result in a fire causing property damage, personal injury or death. Correction: dealers will replace the fuel return pipe and install two additional pipe brackets.

  Show Content

• Recall 2009317 [Canada]: Airbag
  On certain vehicles operated in areas of heavy road salt usage, the front impact sensors may corrode between the sensor bushing and sensor bracket. Over time, the corrosion may cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. This could result in delayed deployment of the driver and passenger front airbags during a vehicle crash, increasing the risk of personal injuries or death. Correction: dealers will replace the front impact sensors.

  Show Content

• Recall 2008419 [Canada]: Label
  On certain vehicles, the french-language tire pressure label may contain incorrect spare tire information. The specification for the spare tire may be shown as t145/70d18, instead of t145/70r18. Correction: updated labels will be mailed to owners of affected vehicles along with instructions for proper installation.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

The air bag light comes on and off when driving the car or parked and running. I see there was a recall on the airbag module thru 2007 lancer. Mine has 71k miles. Is there a recall in the works for 2009 models?

The air bag light comes on and off when driving the car or parked and running. I see there was a recall on the airbag module thru 2007 lancer. Mine has 71k miles. Is there a recall in the works for 2009 models?

The brake lights were no longer functioning, but the tail lights were still operating. The car failed inspection due to brake lights not functioning and the vehicle was taken to the dealership for diagnostics. The ecu, part number 8637c096 is what is in my vehicle. There is a safety recall for a 2009 lancer, sr-15-002, for the ecu but because of the part number (8637a826) difference the dealership will not replace my ecu that is faulty. Upon further personal investigation i have found several issues surrounding the ecu for lancers;10091781, 10158957, 10142736, 10117850, 10158956, 10158955, 10142736, 10158957. Several individuals have reported electrical problems and that the company would not fix the issue. (https://www.Carcomplaints.Com/mitsubishi/lancer/2009/electrical/electrical_system.Shtml) part numbers are "not typically given out" i was told at the dealership on september 24th, 2020. The replacement part number i was given would be 8637c496. However, this part must be programmed by a liscened dealer....This monopoly of parts, refusal to give out part identification numbers, and extreme cost (of the part ~$870) has caused people to be unable to afford the repair while the manufacture is essentially not covering the cost of the safety concern and puts the cost of repair on the consumer.. Or the vehicle cannot pass inspection and therefor cannot continue to be in service. I will not own another mitsubishi because of this. My husband purchased this car brand new. I am the second owner and all safety recalls, service, and even tire rotations have been maintained on this car. After the diagnostic test was completed, and i left the dealership to return home the brake lights stayed on after my car was parked and the key removed from the ignition. At this time my 2009 lancer is sitting at the dealership, and i was asked if i would like to order the part to replace.

The brake lights were no longer functioning, but the tail lights were still operating. The car failed inspection due to brake lights not functioning and the vehicle was taken to the dealership for diagnostics. The ecu, part number 8637c096 is what is in my vehicle. There is a safety recall for a 2009 lancer, sr-15-002, for the ecu but because of the part number (8637a826) difference the dealership will not replace my ecu that is faulty. Upon further personal investigation i have found several issues surrounding the ecu for lancers;10091781, 10158957, 10142736, 10117850, 10158956, 10158955, 10142736, 10158957. Several individuals have reported electrical problems and that the company would not fix the issue. (https://www.Carcomplaints.Com/mitsubishi/lancer/2009/electrical/electrical_system.Shtml) part numbers are "not typically given out" i was told at the dealership on september 24th, 2020. The replacement part number i was given would be 8637c496. However, this part must be programmed by a liscened dealer....This monopoly of parts, refusal to give out part identification numbers, and extreme cost (of the part ~$870) has caused people to be unable to afford the repair while the manufacture is essentially not covering the cost of the safety concern and puts the cost of repair on the consumer.. Or the vehicle cannot pass inspection and therefor cannot continue to be in service. I will not own another mitsubishi because of this. My husband purchased this car brand new. I am the second owner and all safety recalls, service, and even tire rotations have been maintained on this car. After the diagnostic test was completed, and i left the dealership to return home the brake lights stayed on after my car was parked and the key removed from the ignition. At this time my 2009 lancer is sitting at the dealership, and i was asked if i would like to order the part to replace.

We have issues with the low beam headlights malfunctioning. They would cut off while going down the road. Would stay on when car and lights were turned off and we would have to take the relay out to get them turned off. They would flash on and off while the car was on or off. Replaced numerous relays, returned multifunction switch three times. This caused our son to have a wreck as the low beams lights turned off and a car not seeing him pulled out in front of him. Started a 1 1/2 years ago, there have been numerous other complaints about the headlights turning off and nothing being done. Something needs to be done before another accident occurs or death from accident.

We have issues with the low beam headlights malfunctioning. They would cut off while going down the road. Would stay on when car and lights were turned off and we would have to take the relay out to get them turned off. They would flash on and off while the car was on or off. Replaced numerous relays, returned multifunction switch three times. This caused our son to have a wreck as the low beams lights turned off and a car not seeing him pulled out in front of him. Started a 1 1/2 years ago, there have been numerous other complaints about the headlights turning off and nothing being done. Something needs to be done before another accident occurs or death from accident.

I got recall about lower control arms for my mitsubishi 2009 lancer. It said that it applies to all cars if exposed for long term to snow melt water and anti-freezing agents. It says in the recall that a detached front control arm can result in a loss of vehicle control, increasing the risk of crash. My car was exposed to snow melt and anti-freezing agents for two years in south korea, one tear in missouri, and seven years in new york. Oahu dealership refused to help and said that this recall applies to the cars currently located in japan only. I called nj dealership where we bought the car and they said that we should bring the car in immediately and they will help with this safety recall. Currently i live on oahu, hawaii and i don't understand why they refuse to fix the car and ignore this safety recall. Why one dealership said that they will take care of the car and aware of safety recall while other in hawaii where i currently live, refusing to fix it. Please help

I got recall about lower control arms for my mitsubishi 2009 lancer. It said that it applies to all cars if exposed for long term to snow melt water and anti-freezing agents. It says in the recall that a detached front control arm can result in a loss of vehicle control, increasing the risk of crash. My car was exposed to snow melt and anti-freezing agents for two years in south korea, one tear in missouri, and seven years in new york. Oahu dealership refused to help and said that this recall applies to the cars currently located in japan only. I called nj dealership where we bought the car and they said that we should bring the car in immediately and they will help with this safety recall. Currently i live on oahu, hawaii and i don't understand why they refuse to fix the car and ignore this safety recall. Why one dealership said that they will take care of the car and aware of safety recall while other in hawaii where i currently live, refusing to fix it. Please help

Sub frame is bad on the car. Had 3 different mechanics look and state unsafe to drive. Called mitsubishi motors and dealership multiple times no resolution...

Common OBD-II Error Codes

• P061A [1] Internal Control Module Torque Performance
• P1241 [1] Fuel Pump Control Out Of Range
• P0068 [1] MAP/MAF - Throttle Position Correlation
• P1235 [1] Fuel Pump Low Speed Malfunction
• P0012 [1] "A" Camshaft Position - Timing Over-Retarded (Bank 1)
• P0420 [1] Catalyst System Efficiency Below Threshold (Bank 1)
• U0141 [3] Lost Communication With Body Control Module "A"
• P0741 [2] Torque Converter Clutch Circuit Performance or Stuck Off
• P0845 [1] Transmission Fluid Pressure Sensor/Switch "B" Circuit