NTB18-008A

Service Bulletin Details

Public Details for: NTB18-008A

Adas system dtc C1A03, C1A04, and/or C1B01 service information this bulletin has been amended. See amendment history on the last page. Please discard previous versions of this bulletin.


- 2018 - 2017 -

Classification:
Reference:
DA18-001A
Date:
NTB18-008A
March 24, 2021
ADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01
SERVICE INFORMATION
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
2017 – 2018 Rogue (T32)
2017 – 2018 Rogue Sport (J11)
2017 – 2018 Armada (Y62)
2017 – 2018 Pathfinder (R52)
2017 – 2018 Murano (Z52)
2017 – 2018 Sentra (B17)
2017 – 2018 Altima (L33)
2017 – 2018 Maxima (A36)
This bulletin applies to the above vehicles equipped with Automatic
Emergency Braking (AEB) or Forward Emergency Braking (FEB).
SERVICE INFORMATION
If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures
in the Electronic Service Manual (ESM) before replacing any parts.
C1A03 – VEHICLE SPEED SENSOR

The diagnostic procedure in the ESM includes check and, if needed, repair for
ABS DTCs before replacing ADAS components.

If repairs are performed for the ABS system; when compete, perform DTC
Confirmation Procedure again before doing any additional repairs.
C1A04 – ABS/TCS/VDC SYSTEM

The diagnostic procedure in the ESM includes check and, if needed, repair for
ABS DTCs before replacing ADAS components.

If repairs are performed for the ABS system; when compete, perform DTC
Confirmation Procedure again before doing any additional repairs.
C1B01 CAM AIMING INCMP

The diagnostic procedure in the ESM includes check and, if needed, repair for
LANE CAMERA DTCs before replacing ADAS components.

LANE CAMERA DTC may require adjustment of the lane camera.

If repairs/adjustments are performed for the Lane Camera; when compete, perform
DTC Confirmation Procedure again before doing any additional repairs.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
February 1, 2018
NTB18-008
March 24, 2021
NTB18-008A
DESCRIPTION
Original bulletin published
Classification number updated
2/2
NTB18-008A


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.