NTB16008

Classification:
Reference:
EL16-001
Date:
NTB16-008
January 15, 2016
NISSAN; THEFT ALARM
TRIGGER HISTORY FUNCTION
APPLIED VEHICLES: 2015-2016 Murano (Z52)
2013-2016 Pathfinder (R52)
2016 Maxima (A36)
2013-2016 Altima (L33)
SERVICE INFORMATION
The function to detect the last item to trigger the vehicles theft alarm system can now be
accessed with CONSULT-III plus (C-III plus).
This theft alarm history information can be used to confirm what triggered a past theft alarm
audible alert.
EXAMPLE: A customer describes that the alarm sounds for no apparent reason at some
point in the past.
This function can be accessed by selecting:

Diagnosis (All Systems) or Diagnosis (One System).
Then

BCM
Then

THEFT ALM
Then

Work Support
Then

THEFT ALM TRG
See Service Procedure for more detail.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/3
SERVICE PROCEDURE
1. Turn the vehicle ON, but do not start the engine.
2. Connect the VI and start C-III plus.
3. To access the theft alarm trigger function, navigate the C-III plus to the screen below
through either Diagnosis (One System) or Diagnosis (All Systems) and then BCM.
4. Select THEFT ALM.
Step 4
Figure 1
5. Select Work Support.
Step 5
Figure 2
2/3
NTB16-008
6. Select THEFT ALM TRG under Test Item.
Step 6
Figure 3

CONSULT-III plus will display a list of all the theft alarm Monitor Items (Figure 4).
 The last trigger to set off the alarm will be displayed as “On”.
 If no triggers were detected, all Monitor Items will show as “Off”
Step 7
Last theft
alarm trigger
Figure 4
7. After a theft alarm trigger has been noted, the history can be cleared by selecting Start.
3/3
NTB16-008