2051045/4

Service Bulletin Details

Public Details for: 2051045/4

Night vision camera - washer jet leaking. Customer statement / workshop findings: washer fluid dripping/leaking from the night vision camera washer jet. Technical background: please note: the photographs shown within this tpi are based


- 2022 - 2021 - 2020 - 2019 - 2018 - 2017 -

Technical product information
Topic
Market area
Brand
Transaction No.
Level
Status
Release date
Night vision camera - Washer jet leaking
Bentley: worldwide (2WBE),Hongkong-Macau (5HK)
Bentley
2051045/4
EH
Approval
New customer code
Object of complaint
Complaint type
driver assist systems, convenience features -> night-vision enhancement -> camera cleaning
(night vision system)
functionality -> without function /
defect
Vehicle data
Bentayga - New GT/C - New Flying Spur
Sales types
Type
3S3*
3S3*
3S3*
3S3*
3S3*
3S4*
3S4*
3S4*
3S4*
4V1*
4V1*
4V1*
4V1*
4V1*
ZG2*
ZG2*
ZG2*
MY
2018
2019
2020
2021
2022
2019
2020
2021
2022
2017
2018
2019
2020
2021
2020
2021
2022
Brand Designation Engine code
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
E
*
Documents
Document name
master.xml
Gearbox code
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Final drive code
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Position
Technical product information
Night vision camera - Washer jet leaking
Transaction No.: 2051045/4
Customer statement / workshop findings
Washer fluid dripping/leaking from the night vision camera washer jet
Technical background
Please note: The photographs shown within this TPI are based on a New Continental GT/C vehicle however the process is
similar regardless of vehicle type
Referring to Figure 1 - In the event the afore mentioned symptom is evident the operative should refer to the Measure section of this TPI to
replace the night vision washer jet (short link hose -Circled) which connects the night vision camera washer jet (A) to the washer jet supply hose
connector (B)
Figure 1
NOTE: For this particular procedure, the calibration of the night vision camera system is not required unless an issue is
identified with the night vision camera system (resulting in camera replacement “For example”)
Or
The vehicle is visiting the workshop for repairs which require calibration/adjustment to drive assist systems including the night vision
camera
TIP: Refer to Rep.Gr 44 regarding calibration/adjustment requirements to driver assist systems for further details/clarification
Production change
-
Measure
1) Referring to Rep.Gr 63 Remove the front bumper lower inner grilles
2) Disconnect the hose from the night vision camera as shown in Figures 2 and 3
Please note: Washer fluid may leak once the hose is disconnected - Ensure a suitable container is used to collect the fluid, all
fluid MUST be discarded as per all local environmental guidelines)
Figure 2
Figure 3
3) Referring to Figure 4
•
Disconnect the hose from all applicable clipping points see example at (A)
•
Disconnect the hose at (B)
Figure 4
4) Carry out a visual check to confirm all O-rings/seals are to specification
TIP: Referring to Figure 5 - The operative should disconnect the short hose from the hose assembly at the connection shown (Arrow)
The short hose section (A) should be fitted to the vehicle, the remaining part of the hose assembly can be discarded as per all local and
environmental guidelines as this is not required to be fitted as part of this TPI unless unserviceable
Figure 5
5) Fit and connect the replacement night vision camera short link hose, ensuring all clips are reattached to all clipping points
TIP: In the event the replacement night vision washer hose cannot be fitted immediately, the operative must fit suitable
caps/bungs to eliminate the risk of contamination/dirt ingress into the night vision camera washer system
6) Referring to Rep.Gr 63 - Refit the front bumper lower inner grilles
•
Top up the washer fluid reservoir with approved washer fluid
Warranty accounting instructions
Time to replace the night vision camera washer jet (short) hose All
Models
Warranty Type
110 or 910
Labour Operation Code
92 54 19 50 (Use 99 index until 17/02/22)
Damage Service Number
92 66
Damage Code
00 50
Time to remove and refit both front inner grilles
Bentayga - New Continental GT/GTC
Labour Operation Code
66 04 19 00
Time
10 TU
New Flying Spur
Labour Operation Code
Time
66 04 19 00
20 TU
Parts information
Night vision camera washer jet hose (short section)
•
Bentayga - 36A955970B
•
New GT/GTC - 3SA955663
•
New Flying Spur - 3SA955663A


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.