NTB22-020

Classification:
EL22-005
Reference:
Date:
NTB22-020
March 15, 2022
SERVICE INFORMATION FOR BRAKE SWITCH ADJUSTMENT
FOR DTC C1142 AND/OR C1116 STORED
APPLIED VEHICLES:
2019-2022 Altima (L34)
2022 Frontier (D41)
2019-2022 Murano (Z52)
2022 Pathfinder (R53)
2019-2022 Titan/Titan XD (A61)
SERVICE INFORMATION
DTC C1142 (PRESS SEN CIRCUIT) and/or C1116 (STOP LAMP SW) may be stored if the
Stop Lamp Switch and/or the Brake Pedal Position Switch are out of adjustment.
Before replacing any components for DTCs C1142 (PRESS SEN CIRCUIT) and/or C1116
(STOP LAMP SW), stored as past or current, confirm that the Stop Lamp Switch and the
Brake Pedal Position Switch are properly adjusted.
If either the Stop Lamp Switch and/or the Brake Pedal Position Switch are found to be out
of adjustment, adjust them as per the ESM, and then clear the DTCs and perform DTC
confirmation.

Refer to the ESM: BRAKES > BRAKE SYSTEM > PERIODIC MAINTENANCE >
BRAKE PEDAL > Adjustment
Brake Pedal
Position Switch
Stop Lamp
Switch
Figure 1
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
March 15, 2022
NTB22-020
DESCRIPTION
Original bulletin published
2/2
NTB22-020