9004206

Service Bulletin Details

Public Details for: 9004206

Remanufactured transmission assembly 1. All promaster (vf) 3.6l/62te equipped vehicles: a) if the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (part number 06511385a$) must be replace


- 2021 - 2020 - 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 -

Models from 2021
2021 RAM PROMASTER
9004206
03/09/2022
MY11-14 JS, MY15-22 VF, MY11-20 RT, JC
GPOP - Issue Review System
Part Number: R8037280A$, R8039386A$, R8067698A$, R8071389A$, R8080714A$,
R8088606A$, R8090720A$, R8090721A$, R8210327A$, 68145886A$,
R8599680A$, R8453637A$
Part Description: Remanufactured Transmission Assembly
Issue 1. All Promaster (VF) 3.6L/62TE equipped vehicles:
Description:
a) If the transmission bracket to the transmission case fasteners are removed
during servicing, the fasteners (Part Number 06511385A$) must be replaced as
they are one-time usage.
b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes
Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and
Fastener Service Kit PN 68329056AA.
c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN
68329056AA.
2. Only use the reman 62TE specified in StarParts for each model year
- Only use R8210327A$ for 2014 - 2018 VF.
- Only use R8453637A$ for 2019 VF.
- Only use R8599680AA for 2020/1VF.
Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18
MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the
2019-21 version. Continued mis-usage will result in a core shortage. Mopar may
deny warranty claims where the incorrect version is used in 2014-18 VF.
3. The engine to transmission dowel pins are critical to the longevity of several
components. Verify the dowel pins are in the rear face of engine block before
installing a replacement transmission. Mopar will add loose dowel pins with
remanufactured 62TE.
4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740
or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are
indicative of a torque converter failure. Replace the torque converter.
5. There may be incorrect fluid measurement on the dipstick tool when checking
62TE fluid level after filling the ATF as per service library specification. Please
change with new valve body pan P/N:68145886A$ as there may be incorrect valve
body pan is used in Transmission.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.