03-085

03-085: Bendix BlindSpotter Aftermarket Install
10/19/2022
 Edit
 Clone
03-085
​Bendix BlindSpotter Aftermarket Install
Subject
​Bendix BlindSpotter Aftermarket Install
Whats New Abstract
T​ his is a follow-up bulletin to shortage bulletin S017. Parts kits are now available to install the Bendix Side Collision
Mitigation Radar system (BlindSpotter) on chassis that were delivered with a prewire sales code due to parts
shortages. Ordering and installation procedures are included.
Condition
​ ertain chassis were delivered with a prewire setup for the Bendix Side Collision Mitigation Radar (BlindSpotter)
C
system due to a parts shortage. Parts are now available to install the complete system in these vehicles.
Chassis Affected
​ odel Year 2023 337, 348, 389, 520, 536, 537, 548, 567, and 579 chassis built from 5/23/2022 through current
M
with Bendix Side Collision Mitigation Radar (BlindSpotter) “Prewire” specified on the vehicle sales order.
Action
Information Only
Please see procedure section of this bulletin for details on how to install the parts to complete the prewired
Bendix BlindSpotter system.
Situation
​ odel Year 2023 337, 348, 389, 520, 536, 537, 548, 567, and 579 chassis built from 5/23/2022 through current
M
with Bendix Side Collision Mitigation Radar (BlindSpotter) “Prewire” specified on the vehicle sales order.
Warranty
There is no warranty offered for the purchase and/or installation of these Bendix BlindSpotter kits. Purchase
and installation will be completely paid by the customer who owns the vehicle.
Parts
Parts are available from PACCAR Parts.
​Quantity Part Number
​Description
1
Single 250K
K252262A000 sensor for 1.9m medium
duty chassis.
1
Single 500K sensor
for 1.9m *OR* 2.1m
K252261A000 chassis *OR* Model 520
with single RH or
LH sensor.
1
Dual 500K sensors for
K252260A000 Model 520 (RH - lower
level, LH - higher level).
Procedure
Please follow your dealership's safety procedures and precautions to ensure the vehicle can be safely
repaired and maintained.
If you already have the correct parts kit, please see the Links section for the installation procedure. Also, see
the Links section for the Bendix BlindSpotter manual.
If you do not yet have the parts kit needed, please see the Parts section for kit numbers, and place your kit
order per the following:
Place parts order with PACCAR Parts:
oSubmit a ‘Place an Order’ TCS365 case
oSelect Case Category as “Pre-Wire”
oProvide Kit Part Number
oProvide Chassis Number invoiced with "Pre-Wire" code
oProvide the Dealer PO Number
Kits are specifically for trucks with the Side Radar Pre-Wire ONLY.
Attachments
Bendix BlindSpotter Installation Procedure
Bendix BlindSpotter manual
Authored by D. Cook