Recalls

Recall 2010062

  • CA Recall: Brakes
    On certain vehicles, the brake pedal pivot pin end was not properly manufactured. as a result, the pin may not remain in place, causing the brake pedal to partially disengage from the brake pedal bracket. if this occurs, the driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force. a reduction in braking force may lead to increased stopping distances and the risk of a crash causing property damage, personal injury or death. correction: owners of all potentially affected vehicles will be contacted and their brake pedal assembly will be inspected and replaced if necessary.

  • © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.