Ducati Monster S4 R 2004

Vehicle Details: Investigations, Service Bulletins

Below you will find all available information on the 2004 DUCATI Monster S4 R, manufacturered by Ducati Motor Holding S.p.a. .

ManufacturerKnown WMI(s)Fuel Type
DUCATIML0 ML0
DUCATI VIN Decoder

Use the box here to look up VINs from DUCATI as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2004 DUCATI Monster S4 R produced?
     - The 2004 DUCATI Monster S4 R is produced in Bologna, Italy.
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SRV-SRB-24-001 - SUSPENSION: Procedure for assessing front fork oil leaks. Applicability: all models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technic
  • SRV-SRB-23-037 - POWER TRAIN: Finial drive chain maintenance precautions. Applicability: all models and model years (except xdiavel). This service bulletin replaces and cancels the previous bulletins: srv-srb-18-030 published on 05/11/2018, srv-srb-19-046 published on
  • SRV-SRB-23-036 - SERVICE BRAKES, HYDRAULIC: Guided diagnosis for front brake system bleeding. Applicability: all models. This service bulletin replaces and cancels the previous bulletin srv-srb-20-014 published on 4/17/2020. It provides dealers and service managers with needed info
  • SRV-SRB-23-018R1 - ENGINE AND ENGINE COOLING: Procedure for analysis and control of oil and coolant leaks from engine_rev.01. Applicability: all models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant an
  • TTB-23-001 rev07 - ENGINE AND ENGINE COOLING: Tips and tricks revision 7 summary. Range and motor error codes for the multistrada; assembly procedure of the brake caliper mounting plate when refitting the rear wheel for the monster; oil seal install instructions on dry clutch housing f
  • SRV-SRB-23-031 - ENGINE AND ENGINE COOLING: Precautions to follow during crankcase cleaning. Applicability: all models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcas
  • SRV-SRB-23-018 - ENGINE AND ENGINE COOLING: Procedure for analysis and control of oil and coolant leaks from engine. Applicability: all models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes s
  • SRV-SRB-22-038 - SERVICE BRAKES, HYDRAULIC: Overview of rear brake system updates. Applicability: all models. This service repair bulletin provides dealers and service managers a provides a summary of the updates available for motorcycles that have customer concerns about a slight e
  • SRV-TSB-22-010 - ENGINE AND ENGINE COOLING: Cr235 a?? Checking proper configuration of options installed on the motorcycle. Applicability: all models (usa & mex country versions only) . This technical service bulletin informs dealers and service managers of required bbs electronic c
  • SRV-SRB-22-031 - SERVICE BRAKES, HYDRAULIC: Overview of rear brake system updates. Applicability: all us models. This service bulletin provides a summary of the updates available for motorcycles that have customer concerns about a slight elongation, over time and use, of rear brake
  • SRV-SRB-22-020 - ENGINE AND ENGINE COOLING: Service operation manual update 2022. Applicability: all models, all model years. This service bulletin informs dealers and service manages of service and operations updates to the operations manual.
  • TTB-22-001_R 01 - SERVICE BRAKES, HYDRAULIC: Tips & tricks v 01 - applicability: all models. Pg 13 : possible damage to water pump gear oil seal. Diavel 1260 (all model versions). Pg. 15: indication for replacement of brake hoses under warranty. Multistrada v4 pp, pg. 41, possible pre
  • SRV-ESB-22-002 - ELECTRICAL SYSTEM: Rules for battery replacement under warranty. Applicability: all models, all years. This electronic service bulletin replaces and cancels srv-esb-19-001, published january 17, 2019. It provides dealers and service managers the correct repl
  • TTB-20-001 r25 - ENGINE AND ENGINE COOLING: Tips & tricks v25 - applicability: all models. Pg 12 : update of engine oil filter cartridge tightening torque. Multistrada v4 (all model versions). Pg. 38: possible incorrect diameter of the silencer front or rear manifold in the racing ex
  • TTB-20-001 rev20 - ENGINE AND ENGINE COOLING: Tips & tricks. Applicability: all models, all model years, p. 10-error P0314 validation: high misfire with risk of damaging the catalytic converter; p.11-control unit reprogramming. Multistrada v4s all model years, p.30-right-hand switch b
  • SRV-TTB-21-001v3 - EQUIPMENT: Tips & tricks ver 03. Applicability: all models, all model years. This tips & tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by ducati field technicians. Topics i
  • SRV-TTB-20-001 r - SUSPENSION: Tips & tricks ver 12. Applicability: all models, all model years. This tips & tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by ducati field technicians. Topics ra
  • SRV-SRB-21-013 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Rideability complaints. Applicability: all models. The purpose of this service bulletin is distribute a questionnaire to help dealers and service managers collect detailed information about any rideability complaints for models equipped w
  • SRV-SRB-20-014 - SERVICE BRAKES, HYDRAULIC: Guided diagnosis for front brake system bleeding - applicability: all vehicle models, all years. This service bulletin provides guidance for front brake system bleeding. It includes a "guided diagnosis" attachment, which outlines the seque
  • SRV-SRB-19-045 - EQUIPMENT: Scheduled maintenance check list update - applicability: all models. This service bulletin provides dealers and service managers with scheduled maintenance updates specific to each of ducati's models. This includes updated mileage and time
  • SRV-SRB-19-046 - POWER TRAIN: Final drive chain maintenance precautions - applicability: all models and model years (except xdiavel). The purpose of this service bulletin is to further inform dealers and service managers of proper maintenance to ensure optimal performa
  • SRV-SRV-19-035 - ENGINE AND ENGINE COOLING: Tiltwatch indicator for engine shipments - applicability: all models, all years. This service repair bulletin informs dealers and service managers about the "tiltwatch" indicator being implemented on engine packages. It also provides inst
  • SVC-09-009 - STEERING:GEAR BOX:SHAFT SECTOR: Ducati motorcycle: the gear selector mechanism applicable to all ducati model motorcycles equipped with 2v/4v engines has been revised due to difficulty in selecting a gear and gear selector was set incorrectly. No model years listed.
  • 684 - ELECTRICAL SYSTEM:WIRING: Main wirin harnes for monster s4 models from 2003-2006. Ducati. *kb
Known Recall Investigations
  • Fuel leak at pump/tank interface investigation # PE10045

    After opening this pe, we met with subject owners, dealers, and ducati north america personnel.We learned that the subject leakage is limited to the multistrada line alone and is unrelated to composite fuel tank deformation.Rather it stems from the inability of the original sealing o-ring to conform to the tanks relatively rough sealing surface.Recall 11v-020 provides a new "x" section o-ring to address the multistrada issue and with that recall, this pe is closed for the multistrada.Meanwhile, unlike the multistrada, the monster line fails to exhibit a current safety defect trend and, on that basis, this pe is closed for those models as well.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.