Ford E-350 Allstar 2005

• Recall 94188 [USA]: A fuel leak in the presence of an ignition source may result in a fire.
  Ford is recalling certain replacement fuel tanks that could be installed into model year 2004 through 2008 e-150, e-250, and e-350 vans and wagons. The affected fuel tanks have an extra obdii sensor hole on the top of the tank that may not be properly sealed and may leak fuel.
  ford will notify owners, and dealers will replace the fuel tanks free of charge. The safety recall began on november 28, 2011. Owners may contact ford motor company customer relationship center at 1-800-232-5952.
  ford's recall campaign number is 11s22.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 80010 [USA]: If sufficient arcing occurs, the fuse holder may melt, and may be accompanied by flame, smoke and potential fire.
  Braun is recalling certain model year 2005 through 2011 paratransit vans built on ford e-350 chassis from april 27, 2005, through july 29, 2010, equipped with carrier genv em-1 evaporator units (em-1) manufactured from january 1, 2006 through december 2010, containing a delphi pack-con iii fuse holder in an allied motion motor assembly; em-1 unit part numbers 77-62112-xx and 77-62512-xx, starting with serial number knt90890232 to serial number nne91230058. Due to time, temperature, and/or vibration, the fuse may loosen in the fuse holder resulting in high resistance and arcing.
  braun will notify owners and instruct them to contact either carrier or a braun dealer to obtain the free remedy. The safety recall began on march 17, 2011. Owners may contact carrier at 1-800-793-4741 or braun at 1-800-the-lift (1-800-843-5438).
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 67534 [USA]: The user of the lift could be injured should the lift move unintentionally.
  Quality vans is recalling certain model year 2004 through 2008 vans manufactured between august 2005 and november 2007, equipped with ricon platform style wheelchair lifts. These vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 404, "platform lift installations in motor vehicles." the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area.
  quality vans is working with ricon to correct the wheelchair lifts free of charge (please see 07e095). Owners may contact ricon at 1-818-267-3000 or quality vans at 1-480-464-7007.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 66890 [USA]: The user of the lift could be injured should the lift move unintentionally.
  Customizers is recalling 6 vans equipped with ricon platform style wheelchair lifts. These lifts fail to comply with the requirements of federal motor vehicle safety standard no. 404, "platform lift installations on motor vehicles." the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area.
  customizers is working with ricon to correct the wheelchair lift free of charge (please see 07e095). Owners may contact ricon at 1-818-267-3000.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 82510 [USA]: A lift occupant can be injured should the lift begin to stow unintentionally.
  Freewheel mobility is recalling 4 my 2005 ford e-350 and my 2006 ford e-250 passenger vans and equipped with ricon platform style wheelchair lifts. These lifts fail to comply with the requirements of federal motor vehicle safety standard no. 403, "platform lift system accessible for motor vehicles." the anti-stow interlock may not detect the presence of a wheelchair or mobility aid user. The pressure sensing switch that detects the presence of weight on the platform was not adjusted to the necessary sensitivity level. The lift could stow even though someone or something is still on the lift.
  freewheel mobility is working with ricon to correct the wheelchair lifts free of charge (please see 07e097). Owners may contact ricon at 1-818-267-3000.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 73301 [USA]: The user of the lift could be injured should the lift move unintentionally.
  Freewheel mobility is recalling 4 my 2005 ford e-350 and my 2006 ford e-250 passenger vans equipped with ricon platform style wheelchair lifts. These vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 404, "platform lift installations on motor vehicles." the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area.
  freewheel mobility is working with ricon to correct the wheelchair lifts free of charge (please see 07e095). Owners may contact ricon at 1-818-267-3000.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 84737 [USA]: The user of the lift could be injured should the lift move unintentionally.
  Van conversions is recalling 74 my 2004-2007 ford e-150, e-250 e-350 and my 2006 gm savanna 3500 vans built on ford and gm chassis and equipped with ricon platform style wheelchair lifts. These vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 404, "platform lift installations in motor vehicles." the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area.
  van conversions is working with ricon to correct the wheelchair lifts free of charge (please see 07e095). Owners may contact ricon at 1-818-267-3000 or van conversions at 610-837-0707.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 84776 [USA]: A lift occupant can be injured should the lift begin to stow unintentionally.
  Van conversions is recalling 52 my 2004-2007 ford e-150, e-250 e-350 and my 2006 gm savanna 3500 vans built on ford and gm chassis and equipped with ricon platform style wheelchair lifts. These lifts fail to comply with the requirements of federal motor vehicle safety standard no. 403, "platform lift system accessible for motor vehicles," the anti-stow interlock may not detect the presence of a wheelchair or mobility aid user. The pressure sensing switch that detects the presence of weight on the platform was not adjusted to the necessary sensitivity level. The lift could stow even though someone or something is still on the lift.
  van conversions is working with ricon to correct the wheelchair lifts free of charge (please see 07e097). Owners may contact ricon at 1-818-267-3000 or van conversions at 610-837-0707.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 84131 [USA]: The user of the lift could be injured should the lift move unintentionally.
  Leader industries is recalling 14 my 2005-2006 vans built on ford chassis and equipped with ricon platform style wheelchair lifts. These vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 404, "platform lift installations on motor vehicles." the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area.
  leader industries is working with ricon to correct the wheelchair lifts free of charge (please see 07e095). Owners may contact ricon at 1-818-267-3000 or leader industries at 626-575-0880.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 88077 [USA]: A lift occupant can be injured should the lift begin to stow unintentionally.
  Oneness mobility is recalling 19 my 1998, and 2005-2006 e-350 vans built on ford chassis and equipped with ricon platform style wheelchair lifts. These lifts fail to comply with the requirements of federal motor vehicle safety standard no. 403, "platform lift system accessible for motor vehicles." the anti-stow interlock may not detect the presence of a wheelchair or mobility aid user. The pressure sensing switch that detects the presence of weight on the platform was not adjusted to the necessary sensitivity level. The lift could stow even though someone or something is still on the lift.
  oneness mobility is working with ricon to correct the wheelchair lifts free of charge (please see 07e097). Owners may contact ricon at 1-818-267-3000 or oneness mobility at 1-818-267-3000.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 78015 [USA]: The user of the lift could be injured should the lift move unintentionally.
  Mobilityworks is recalling 224 my 2007-2008 ford e150, my 2006-2008 e250, my 2004-2007 e350, my 2006 e450, my 2005-2007 chevrolet 2500, my 2007 chevrolet 1500, and my 2006 dodge 2500 vans equipped with ricon platform style wheelchair lifts. These vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 404, "platform lift installations in motor vehicles." the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area.
  mobilityworks is working with ricon to correct the wheelchair lifts free of charge (please see 07e095). Owners may contact ricon at 1-818-267-3000 or mobility works at 1-800-769-8267.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 47928 [USA]: Failure of this connection could lead to fuel spillage and, in the presence of an ignition source, a fire could occur.
  Certain aftermarket fuel filters sold under the purolator brand name, p/n f65277, shipped from january 16 through june 2, 2006, for use on the above listed passenger vehicles. Due to incorrect design, the quick connectors may not fully seat with the tube interface, even though the person making the connection may believe that the quick connector is fully attached.
  ufi will notify owners and replace the filters free of charge. The recall began on august 4, 2006. Owners may contact ufi filters usa at 800-230-5876.
  this recall only pertains to ufi filters usa (purolator) aftermarket fuel filters and has no relation to any original equipment installed on the listed passenger vehicles.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 36139 [USA]: Should the engine stall, a vehicle crash could occur.
  Certain pickup trucks, sport utility vehicles and vans equipped with 6.0l diesel engines may experience stalling without warning while driving and may or may not restart.
  dealers will upgrade the fuel injection control module (ficm) wire harness or replaced, and/or have a new injection control pressure (icp)) sensor connector installed free of charge. The recall began on july 22, 2005. Owners may contact ford at 1-800-392-3673.
  ford recall no. 05s34.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Hvac switch failures investigation # EA10003

  This investigation was opened based on one complaint and reports from four transportation fleets alleging 182 blower motor control switch failures.Odi was concerned that these melting and burning switches could lead to an open flame that could spread throughout the vehicle.After a comprehensive review of all data related to overheating blower motor control switches in the subject vehicles, odi did not identify the existence of a safety defect trend.Odi reviewed 1,036 complaints, claims, and field reports of failed blower motor control switches and determined that only two fires were likely to have been caused by a failing subject blower motor control switch.This represents a failure rate of 0.2 r/100k on a population of 1,076,975 vehicles that have been in service for up to 14 years.Odi has found that when the subject switches do fail and begin to melt, they are constructed in a manner that typically prevents the failing switch from igniting and developing into an open flame.Ford motor company has agreed to take two actions to further reduce the likelihood an overheated blower motor switch in the subject vehicles.Ford informed odi that it has implemented a series of design changes to the subject switch that will help prevent it from developing internal high resistance short circuits.Ford has also informed odi that it would release a technical service bulletin (tsb-11-11-21) instructing subject vehicle owners to replace the electrical connector at the same time a failed switch is replaced.In light of the low rate of failure resulting in open flame and fire spread on the subject vehicles, and fords actions to reduce the likelihood of a switch failure through switch design changes and a tsb, further use of agency resources does not appear to be warranted.The closing of this investigation does not constitute a finding by nhtsa that no safety-related defect exists.The agency reserves the right to take further action if warranted by the circumstances.The odi complaints cited above can be reviewed at www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following (odi) numbers: 10427875, 10114393, 10257890for additional information, see the attached closing report.
  

  Show Content

Only 87000 miles and the fuel tank is shedding silver paint flakes, into the fuel system.. Have now replaced all the filters twice, pump once.. And the tank pre filter has to be clogged as no fuel will even come out.. Had been a very good truck, but this engineering causes the van to just die!! On the road. This is apparently a common problem and one that ford and their engineers are not being responsible for.. Really... Paint inside at fuel tank? Wtf are they thinking...

Only 87000 miles and the fuel tank is shedding silver paint flakes, into the fuel system.. Have now replaced all the filters twice, pump once.. And the tank pre filter has to be clogged as no fuel will even come out.. Had been a very good truck, but this engineering causes the van to just die!! On the road. This is apparently a common problem and one that ford and their engineers are not being responsible for.. Really... Paint inside at fuel tank? Wtf are they thinking...

Tl* the contact owns a 2005 ford e-350. While driving various speeds, the vehicle suddenly stalled. The vehicle was taken to the dealer where it was diagnosed that the fuel injection control module failed. The contact replaced the control module, but the failure continued. Upon inspection, the contact determined that the fuel injection control module wire harness failed. The vehicle was not repaired. The manufacturer was notified of the failure. The contact was informed that the vehicle was not included in nhtsa campaign number: 05v270000 (electrical system). The failure mileage was 90,000.

Tl* the contact owns a 2005 ford e-350. The contact stated that the heater box failed to change settings after the initial setting. The vehicle was taken to a dealer who diagnosed that the heater box needed to be replaced. The manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was 42,900.

Tl* the contact owns a 2005 ford e-350. The contact stated that the gear shifter failed to shift. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was 243,000.

While drive on highway,vehicle began to lose power when i encountered a hill. It bogged down and struggled to make it to top of hill and lost speed down to 30 mph or less and then died. It would not start right away, but after letting it sit for 15 minutes, it started and had regained power and i drove it till i got to the nest hill and did the same thing several times till i made it home 3 hours later for a 10 mile trip. I checked online on the vehicle for ford owners forum and saw that several people encountered this problem before and described it as bogging down and losing power. Some one suggested changing the egr valve which i had done, and the fuel filters as well as air filter. When i removed the bottom fuel filter under the van, i captured the fuel in the filter and line and it had what looked like silver paint. I kept the sample and it is soft and pliable. I assumed it was a protective coating lining the fuel tank. I don't believe this should be happening,because it could do damage to the injectors and other things. *tr

This bus is owned by first baptist church of grant, al. About one year ago we started having times when the bus would crank but not start. Our mechanic has checked it four different tlimes, however, every time except this time (5th time) it started when he went to check it. This time we were taking our seniors on a trip, but when we went to crank it, it cranked but would not start. We had it towed to woody anderson ford in huntsville, al. I spoke with the truck service manager today and he told me the engine wiring harness was bad. This bus only has 30,000 miles on it. It has been at woody anderson ford 4 days. I know recalls are based on the vin number primarily. This is a like new bus and already had to replace the fuel injectors, turbo charger, and a couple of different sensors. Anyone with any common sense knows that it is not normal for an engine wiring harness to go bad. Ford motor company needs to be held accountable and responsible for replacing an engine component that should last as long as you own the vehicle. There is a recall on some vehicles with a 6.0l diesel engine with problems like ours, it is recall # 05s34. The ford dealership said it would cost $3000.00 to replace the wiring harness. This should be a ford motor company problem. Thanks for reading and considering my complaint. Any help would be greatly appreciated. My name is steve stanfield. I am the pastor. My email is [xxx] [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6). *tr

Tl* the contact owns a 2005 ford e-350. While driving 40 mph, the engine stalled without warning. The contact was able to restart the vehicle after repeated attempts. The failure occurred multiple times. The vehicle was not diagnosed or repaired. The manufacturer was notified. The approximate failure mileage was 45,000.

Driving uphill on i-70 eastbound by silverthorne, co the engine simply quit. Limped to side of highway and tried to restart - nothing. Batteries are new, etc just no turning over of the engine. Thoughts are a bad ficm, which there is supposedly a recall but ford denied that when i called this morning. Had the vehicle towed to a shop in arvada, co for diagnosis and repairs. Sounds like the egr system is about to go, the ficm is shot and wiring harness for computer is gone - all things ford is aware of but adamantly refuses to do anything about. This leaves the consumer in the position to have to spend thousands of $'s to repair their design flaws. *tr

Common OBD-II Error Codes

• P0611 [2] Fuel Injector Control Module Performance
• P1378 [1] P1378
• P0401 [2] Exhaust Gas Recirculation Flow Insufficient Detected
• P0402 [1] Exhaust Gas Recirculation Flow Excessive Detected
• P0404 [3] Exhaust Gas Recirculation Circuit Range/Performance
• P1335 [1] Fuel injection pump control module - CKP signal missing
• P2138 [2] Throttle/Pedal Pos Sensor/Switch D / E Voltage Correlation
• P2139 [2] Throttle/Pedal Pos Sensor/Switch D / F Voltage Correlation
• P2140 [2] Throttle/Pedal Pos Sensor/Switch E / F Voltage Correlation
• P2263 [5] Turbocharger/Supercharger Boost System Performance
• P0238 [1] Turbocharger Boost Sensor A Circuit High
• P0299 [5] Turbocharger/Supercharger "A" Underboost Condition
• P2262 [1] Turbocharger/Supercharger Boost Pressure Not Detected - Mechanical
• P0172 [2] System too Rich (Bank 1)
• P0175 [2] System too Rich (Bank 2)
• P0460 [1] Fuel Level Sensor Circuit Malfunction