Genesis Gv80 2024
Complaint Information: Recalls, Service Bulletins, OBD II Codes
Recall 258067 [USA]: A loss of drive power increases the risk of a crash.
Hyundai motor america (hyundai) is recalling certain 2022-2024 ioniq 5, 2023-2024 ioniq 6, genesis gv60, genesis gv70 "electrified," and genesis gv80 "electrified" vehicles. The integrated charging control unit (iccu) may become damaged and stop charging the 12-volt battery, which can result in a loss of drive power.
dealers will inspect and replace the iccu and its fuse, as necessary. In addition, dealers will update the iccu software. All repairs will be performed free of charge. Owner notification letters were mailed april 22, 2024. Owners may contact hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 257/021g.
owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Nhtsa.Gov.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 24-01-030G - ENGINE AND ENGINE COOLING: Certain 2024my gv80 (jx1) vehicles may have had the incorrect awd ecu installed. These vehicles may have the following conditions: a?? Minor shift tuning logic a?? Auto 4wd is always active a?? Activation light does not illuminate on whe
- 21-BD-001G - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Genesis applies a paint protection film (ppf) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can bec
- 21-AT-015G - POWER TRAIN: This tsb provides a procedure to diagnose and repair a transmission for the following incorrect ratio dtc (transmission clutch slipping more than 200 rpm in gear).
- 21-AT-012G - POWER TRAIN: This bulletin provides a procedure to transfer oil pressure data to the tcu using gds mobile. This procedure is necessary to reduce the tcu learning time and improve the shift quality. I?? Before replacing an automatic transmission (pages
- 24-01-001G-1 - ELECTRICAL SYSTEM: Certain gv80 (jx1) vehicles may experience difficulties with genesis connected services activation and/or remote services. This bulletin provides instructions to perform a dealer mode factory reset, followed by a head unit reset for vehicle
- 24-BE-003G - EXTERIOR LIGHTING: This bulletin provides information on the integrated led control unit (ilcu) which is now available as a separate service part from the head lamp assembly for certain g70 (ik), gv70 (jk1), gv70 electrified (jk1a ev), and gv80 (jx1) vehicles
- 24-01-001G - ELECTRICAL SYSTEM: Gv80 (jx1) vehicles may experience difficulties with genesis connected services activation and/or remote services. This bulletin provides instructions to perform a dealer mode factory reset, followed by a head unit reset for vehicles experi
- 23-DS-004G-1 - POWER TRAIN: Certain gv70 (jk1 and jk1a), gv80 (jx1) and g80 (rg3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for nois
- 23-EE-013G - ENGINE AND ENGINE COOLING: This bulletin is issued to provide the extended battery diagnosis procedure using gds. This battery diagnosis function displays the various battery-related faults such as: a?? Internal short circuit a?? Battery deterioration a?? Malfunct
- 23-01-090G - ELECTRICAL SYSTEM: Certain gv80 (jx1) vehicles may experience difficulties with genesis connected services activation and/or remote services. This bulletin provides instructions to perform a dealer mode factory reset, followed by a head unit reset for vehicle
- 23-DS-004G-1 - SUSPENSION: Certain gv70 (jk1 and jk1a), gv80 (jx1) and g80 (rg3) vehicles may have a noise condition from the rear differential at certain speeds while accelerating or decelerating. This bulletin describes the procedure to inspect the vehicle for nois
- 23-FL-006G - ENGINE AND ENGINE COOLING: Neutral coasting mode may not activate under certain conditions when the battery state of charge (soc) is less than 75%. This update revises the software logic to be activated regardless of battery soc.
- 23-ST-004G-1 - STEERING: This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain genesis vehicles.