Honda Civic Cng 2005

• Recall 141610 [USA]: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain 2003-2006 acura mdx, 2005-2012 rl, 2003-2007 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2006 cr-v, 2003-2011 element, 2007-2008 fit, 2002-2004 odyssey, 2003-2008 pilot, and 2006-2014 ridgeline vehicles. The vehicles are equipped with passenger frontal air bag inflators assembled as a recall remedy part or replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
  honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began august 12, 2019. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are e5d and x5c.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 140824 [USA]: An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling specific 2003 acura 3.2cl, 2013-2016 ilx, 2013-2014 ilx hybrid, 2003-2006 mdx, 2007-2016 rdx, 2002-2003 3.2tl, 2004-2006, and 2009-2014 tl, 2010-2013 zdx and 2001-2007 and 2009 honda accord, 2001-2005 civic, 2003-2005 civic hybrid, 2001-2005 civic gx ngv, 2002-2007 and 2010-2011 cr-v, 2003-2011 element, 2007 fit, 2002-2004 odyssey, 2003-2008 pilot, and 2006-2014 ridgeline vehicles. The affected vehicles received a replacement driver air bag inflator as part of a previous takata inflator recall remedy or a replacement driver air bag module containing the same inflator type as a service part. Due to a manufacturing error, in the event of a crash necessitating deployment of the driver frontal air bag, these inflators may explode.
  honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began april 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is o41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is u40.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 128656 [USA]: An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
  Honda (american honda motor co.) is recalling certain 2003-2012 honda accord and pilot, 2010 accord crosstour, 2001-2011 civic, 2002-2011 cr-v, 2003-2004, 2006-2008 and 2011 element, 2007 and 2009-2013 fit, 2010-2012 insight, 2002-2004 odyssey, and 2012 ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
  honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began june 22, 2018. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are k1p, and m1o.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 118914 [USA]: In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the passenger seat occupant or other occupants possibly causing serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2001-2005 honda civic vehicles manufactured march 21, 2000, to january 20, 2005, 2001-2004 honda civic gx vehicles manufactured june 14, 2000, to august 19, 2004, 2003-2005 honda civic hybrid vehicles manufactured february 24, 2002, to january 18, 2005, 2003-2007 honda accord vehicles manufactured february 21, 2002, to august 28, 2007, 2002-2004 honda cr-v vehicles, 2002-2003 honda odyssey vehicles manufactured june 19, 2001, to july 12, 2003, 2003 acura mdx vehicles manufactured september 19, 2002, to june 19, 2003, 2003 honda element vehicles manufactured june 25, 2002, to july 31, 2003, and 2003 honda pilot vehicles manufactured november 26, 2001, to august 21, 2003. The affected vehicles have a passenger side frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture upon its deployment.
  honda will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on july 1, 2015. Owners may contact honda customer service at 1-888-234-2138. Honda's numbers for this recall are ju4, ju5, ju6, and ju7. Note: vehicles that have already received a replacement passenger air bag inflator as part of the recall remedy for an earlier campaign such as 14v353 or 14v700 (honda recall numbers s95, jh6, jh7, jh8, jh9, jj0, jj1, jj2, jj6, jm5 and jm6) are not included in this recall. However, this recall does supersede 13v132 and 14v349. Note: on december 18, 2015 honda informed nhtsa of an expansion of this recall to include certain model year 2004 honda cr-v vehicles in addition to additional model year 2003 cr-v vehicles.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 107190 [USA]: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
  Honda (american honda motor co.) is recalling certain model year 2001-2007 accord, 2001-2005 civic, 2001-2004 honda civic gx, 2003-2005 honda civic hybrid, 2002-2006 cr-v, 2003-2011 element, 2002-2004 odyssey, 2003-2008 pilot, 2006 ridgeline, 2003 acura 3.2cl, 2003-2006 acura mdx, and 2002-2003 acura 3.2tl vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.
  honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on july 1, 2015. Owners may contact honda customer service at 1-888-234-2138. Owners may contact acura customer service at 1-800-382-2238, select option 4. Note: vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to september 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after september 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: this recall fully supersedes recalls 08v-593, 09v-259, 10v-041, 11v-260, 14v-351 and 15v-153. Honda's numbers for this recall are jq9, jr0, jr1, jr2, jr3, jr4, jr5, jr6, jr7, and jr8.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 113971 [USA]: In the event of a crash necessitating deployment of the passenger?s frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
  American honda motor co. (honda) is recalling certain model year 2001-2005 honda civic, 2003-2004 civic cng and element, 2002-2005 cr-v, 2002-2004 odyssey, 2003-2005 accord, pilot, civic hybrid, and acura mdx, 2005 acura rl and 2006 honda ridgeline vehicles originally sold, or ever registered, in geographic locations associated with high absolute humidity. Specifically, vehicles sold, or ever registered, in alabama, florida, georgia, hawaii, louisiana, mississippi, south carolina, texas, puerto rico, u.S. Virgin islands, saipan, guam, and american samoa are addressed by this recall. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
  honda will notify owners, and dealers will replace the passenger side air bag inflator, free of charge. The recall began january 26, 2015. Owners may contact honda customer service at 1-800-999-1009.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.Note: this recall supersedes safety recall 14v-353, with the exception of vehicles originally sold, or ever registered, in california.Those vehicles will continue to be addressed, and a free remedy provided, under that safety recall campaign.This recall also includes vehicles in the specific geographic areas listed above that were included within safety recalls 13v-132 and 14v-349.

  Show Content

• Recall 85817 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by dope, inc.The list can be found under "document search" located at the bottom of your screen. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 75029 [USA]: In the event of a vehicle crash, the occupant(s) may be seriously injured by shattered glass.
  Certain curved tempered replacement glass manufactured by hangzhou safety glass ltd and supplied to safelite by auto temp inc., identified as dot-430, and sold for use on certain domestic and foreign vehicles may not break into small pieces as expected of tempered glass and fails to conform to federal motor vehicle safety standard no. 205, "glazing materials."
  safelite will notify its retail customers and replace the glass free of charge. Retail customers can contact safelite toll free at 1-888-843-2906. Safelite will notify its wholesale customers and reimburse wholesale customers for current inventory and at a specified rate for replacing their customer's glass. Wholesale customers can contact safelite's wholesale division, service autoglass toll free at 1-888-246-6298. The recall began on january 15, 2008.
  this recall only pertains to certain curved tempered replacement glass manufactured by hangzhou safety glass, ltd. (dot-430) and supplied to safelite by auto temp inc., and has no relation to any original equipment installed on the vehicles listed above. Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 71426 [USA]: This could result in a tank rupture, explosion, and ejection of the tank from the vehicle.
  On certain compressed natural gas (cng) vehicles, in the event of a severe interior fire in the area of the rear seat, the cng tank may be heated unevenly, preventing the pressure relief device from venting the contents of the tank as designed.
  dealers will install a heat insulator material to the rear seat back. An interim owner letter was mailed to owners beginning november 26, 2007. When parts are available, owners will be renotified asking them to bring in their vehicle for repair. Owners may contact honda at 1-800-999-1009.
  honda recall no. Q63.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 38116 [USA]: Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.
  Certain tradesonic combination lamps sold as replacement lamps for use on the above listed passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  tradesonic will notify owners and replace the lamps free of charge. The recall is expected to begin during july 2006. Owners may contact tradesonic at 626-934-8884.
  this recall only pertains to tradesonic aftermarket lamps and has no relation to any original equipment installed on the listed passenger vehicles.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 50095 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain eagle eyes and sonar headlights and corner lights sold as aftermarket for use on 1988-2005 honda civic, 1990-2005 honda accord, and 1990-2001 acura integra passenger vehicles listed above. Headlights and corner lights that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  tom motorsport will notify owners and offer reimbursement for the purchase of noncompliant lights. The recall began april 17, 2006. Owners may contact tom motorsport at 626-968-4007.
  this recall only pertains to aftermarket lights and has no relation to any original equipment installed on any vehicles manufactured by american honda motor company.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 61872 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash.
  Certain anzo combination headlamp assemblies sold as replacement lamps for use on certain passenger vehicles. Some combination lamps are not equipped with amber side reflectors which fail to conform to federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
  anzo will notify owners and replace the headlamps free of charge. The recall began may 9, 2006. Owners may contact anzo usa at 909-468-3688.
  this recall only pertains to aftermarket headlamp assemblies manufactured by anzo and has no relation to any original equipment installed on the listed passenger vehicles.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 55866 [USA]: An improperly positioned belt could increase the risk of injury in the event of a crash.
  On certain passenger vehicles, some front seat belt anchors may have been installed with an incorrect washer, which could restrict anchor movement. As a result, the seat belt may be improperly positioned for certain occupants.
  dealers will inspect the front seat belt anchors for restricted movement. If an anchor does not rotate freely, the dealer will replace the washer with a countermeasure washer. The recall began on november 24, 2004. Owners should contact honda at 1-800-999-1009.
  honda recall no. P55. Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall R/2019/125 [UK]: Inner pressure of the inflator may irregularly rise upon airbag deployment rupturing the inflator container
  Driver air bag may not ignite correctly.
  replace the drivers air bag assembly.

  Show Content

• Recall R/2015/104 [UK]: Passenger side airbag may fail to deploy correctly
  Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger?S foot well potentially causing injury to a vehicle occupant.
  on affected vehicles replace the inflator inside the front passenger?S airbag module with a new one.

  Show Content

• Recall R/2019/245 [UK]: Possible air bag inflator rupture
  Driver air bag may not deploy correctly.
  the inflator inside the drivers airbag module is to be replaced.

  Show Content

• Recall R/2016/045 [UK]: Drivers airbag inflator may rupture if deployed
  Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment.
  on affected vehicles replace the inflator inside the driver's air bag module.

  Show Content

• Recall R/2007/025 [UK]: Engine may cut out
  It has been established that when the rear seat is occupied the deformation of the seat back may cause a brief interference between a protection plate and an electrical connector. This can result in the main fuse blowing causing the engine to cut out.
  recalled vehicles will have an additional plastic cover placed over the subject electrical connector.

  Show Content

• Recall R/2006/180 [UK]: Power steering may be lost
  The electrical power steering warning lamp may illuminate and power assistance to the steering will be lost. The driver will not experience any symptoms prior to the failure.
  the electric power steering control unit will be tested and replaced as necessary

  Show Content

• Recall R/2007/141 [UK]: Brake lights may fail to illuminate. gear selector may become stuck in park
  It has been identified that the brake lights may not illuminate when the brake pedal is depressed. Additionally it may not be possible for the driver to release the gear selector from the park(p) position.
  recalled vehicles will have the brake light switch replaced additionally a new block connector will be fitted which has additional protection against ingress of foreign substances.

  Show Content

• Recall R/2011/021 [UK]: Engine may stall
  It is possible that a diode within the dc converter of the integrated motor assist (ima) system became damaged during initial testing. Over time the diode could deteriorate and eventually fail causing a short circuit within the ima system which results in the 100amp fuse blowing. A melted fuse will result in the engine stalling and the engine cannot be restarted. There will not be any noticeable symptoms prior to the engine stalling.
  the dealer will replace the dc converter with a new one.

  Show Content

• Recall R/2008/059 [UK]: Handbrake may release
  It has been identified that; if the handbrake is applied with the release button intentionally or unintentionally depressed there is a small risk that the handbrake may not latch sufficiently to hold the vehicle securely on a slope.
  recalled vehicles will have the handbrake assembly replaced.

  Show Content

• Recall R/2016/127 [UK]: Passenger side airbag may fail to deploy correctly
  In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality.
  on affected vehicles replace the passenger front air bag module.

  Show Content

• Recall 2019323 [Canada]: Airbag
  Issue: on certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Note: this is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall. Safety risk: if the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective action: owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator. Note: the canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.

  Show Content

• Recall 2019117 [Canada]: Airbag
  Issue: on certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly. Note: this recall only affects certain vehicles that had a takata airbag inflator installed during a previous airbag recall or collision repair. Safety risk: in a crash where the airbag deploys, there could be an increased risk of injury. Corrective action: the company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.

  Show Content

• Recall 2015261 [Canada]: Airbag
  On certain vehicles, the passenger frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will replace airbag inflator. Note: honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844

  Show Content

• Recall 2015225 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: this recall supersedes special service campaign 2014567. Correction: dealers will inspect/replace the driver's frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: honda canada has created a special airbag inflator hotline for immediate assistance. For more information, please contact: for honda owners: 1-877-445-7754 for acura owners: 1-877-445-9844

  Show Content

• Recall 2014567 [Canada]: Airbag
  Honda canada is conducting a voluntary safety improvement campaign concerning the driver's airbag inflator on certain vehicles equipped with takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the motor vehicle safety act. Note: this special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information: click here for more information

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Desiccated air bag inflator rupture investigation # EA21002

  From 2000 through 2017, takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("psan") propellant -- propellant 2004 and propellant 2004l. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 blomquist report at www.Nhtsa.Gov/sites/nhtsa.Gov/files/documents/expert_report-hrblomquist.Pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in us vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004l that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated psan inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All takata inflators produced with propellant 2004l contain desiccant, and none of these desiccated inflators using propellant 2004l are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated psan inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- takata (now known as tk global), the independent testing coalition, and exponent -- have been studying the long-term behavior of takata desiccated psan inflators using propellant 2004l (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004l is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004l.The office of defects investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated psan frontal inflators manufactured by takata. This investigation will require extensive information on takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated psan inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.Gov/recalls?Nhtsaid=ea21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede ea15-001, which remains open.
  

  Show Content

• Air bag inflator rupture investigation # EA15001

  The office of defects investigation (odi) opened pe14-016 in june 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in florida or puerto rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by takata, a tier-one supplier of automotive air bag systems.During the course of pe14-016, odi determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at odis insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included florida, puerto rico, hawaii, and the u.S. Virgin islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to takata for testing.Takatas initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from florida.Accordingly odi requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the gulf states and other coastal areas.Takatas testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During pe14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during pe14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically california and north carolina.Accordingly, odi requested all five of the affected vehicle manufacturers currently using the subject takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.Odis investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five odi reports cited above can be reviewed online at http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
  

  Show Content

• Honda ewr reporting investigation # AQ14004

  In a consent order executed on december 29, 2014, american honda motor co. ("honda") admitted that it violated the safety act by failing to report certain death and injury incidents that were required to be reported to nhtsa under 49 c.F.R. § 579.21(b), and by failing to report certain customer satisfaction campaigns, special warranty extensions, and warranty claims that involved goodwill, third-party vehicle service contracts, or honda-certified, pre-owned vehicles, as required by 49 c.F.R. § 579.21(c).As part of the consent order, nhtsa assessed a total civil penalty of $70 million against honda for its violations of the tread act and associated regulations. Honda timely paid the civil penalty in full on january 20, 2015. Honda also agreed to develop written procedures for comprehensive early warning reporting in compliance with 49 c.F.R. Part 579, subpart c; to train appropriate personnel on its early warning reporting requirements and written procedures; and to complete two third-party audits of its tread act reporting.Nhtsa opened this audit query (aq) investigation in order to investigate the extent and scope of hondas failure to report early warning information pursuant to the tread act, as well as the reason(s) for such failures and the steps being taken by honda to assure full compliance with tread reporting requirements.Based on the consent order, hondas admissions that it violated the law, and the completion of its performance obligations, this audit query, aq14-004, is closed. Closure of this aq has no bearing on the terms of the consent order and does not represent a determination by the agency as to hondas performance under the consent order.
  

  Show Content

• Air bag inflator rupture investigation # PE14016

  The office of defects investigation (odi) opened pe14-016 in june 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in florida or puerto rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by takata, a tier-one supplier of automotive air bag systems.During the course of pe14-016, odi determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at odis insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included florida, puerto rico, hawaii, and the u.S. Virgin islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to takata for testing.Takatas initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from florida.Accordingly, odi requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the gulf states and other coastal areas.Takatas testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During pe14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during pe14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically california and north carolina.Accordingly, odi requested all five of the affected vehicle manufacturers currently using the subject takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by takata to date have occurred on inflators returned from high absolute humidity areas.The pe is now closed/upgraded to an engineering evaluation (ea15-001) to include all manufacturersand vehicles known to be affected at this time.Odis ea investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this pe are: 14v343, 14v344, 14v348, 14v351, 14v353, 14v655, 14v700, 14v701, 14v752, 14v763, 14v770, 14v773, 14v787, 14v802 and 14v817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five odi reports cited above can be reviewed online at http://www-odi.Nhtsa.Dot.Gov/owners/searchnhtsaid under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
  

  Show Content

The contact owns a 2005 honda civic. The contact stated while driving 50 mph, the accelerator pedal was depressed and ceased with the rpm level rising. The vehicle then loss motive power. The contact was awaiting a tow to the dealer. The dealer was made aware of the failure. The vehicle was not diagnosed nor repaired. The manufacturer was not made aware of the failure. The failure mileage was 73,361.

The contact owns a 2005 honda civic. The contact stated that the air bag warning light was illuminated. Upon investigation, the contact associated the failure with nhtsa campaign number: 19v501000 (air bags) however, the vin was not included. The manufacturer was not informed of the failure. The failure mileage was approximately 130,000.

The manufacturer failed or wasn't able to remedy the safety recall on my vehicle in a timely manner

The manufacturer failed or wasn't able to remedy the safety recall on my vehicle in a timely manner

I was involved in an accident where i hydroplaned and went head on with a tree yet my airbag did not deploy

I was involved in an accident where i hydroplaned and went head on with a tree yet my airbag did not deploy

The air bag white has been on for so long and i didn't know there was a recall i sideswiped a car it was not my fault the other night and the airbag didn't deploy and i bumped my head

The air bag white has been on for so long and i didn't know there was a recall i sideswiped a car it was not my fault the other night and the airbag didn't deploy and i bumped my head

Recently i've been smelling gas fumes from under my car every time i have the door open and it seems like it's coming from under the car. But i noticed a few days ago that it's getting worse because i could smell it inside the cabin of my car. Last night i have the windows closed and as i opened my door today september the 11th 2020, the odor was so strong fumes of fuel. Can't this be one of the reason for a car to get a recall? Exposed fuel inside the cabin is dangerous, isn't it? Luckily, my air conditioning is not working right now or else i would have my windows rolled up and if i smoke a cigarette, the car might blow up. It seems like it happens to honda a lot because most honda between 2001 to 2005 version seem to be affected by this. Especially watching youtube, there's a lot of complaints and they are showing how common this is for honda civic. What does it take for this to be a part being recalled? My concern is that this is dangerous! Is this just part of maintenance even it's a dangerous situation? Or isn't it a flaw of the parts being use? I'm not mechanically inclined and i don't have the money to fork 300 to 500 dollars to pay the mechanic to repair this, even though i really feel that this should be recalled because i know that it's dangerous. One spark can blow up my car and i happen to be driving with passengers or even just myself.

Common OBD-II Error Codes

• P2646 [1] A Rocker Arm Actuator System Performance/Stuck Off Bank 1
• P2647 [1] A Rocker Arm Actuator System Stuck On Bank 1
• P2651 [1] B Rocker Arm Actuator System Performance/Stuck Off Bank 1
• P2652 [1] B Rocker Arm Actuator System Stuck On Bank 1
• P1588 [1] Electronic Throttle Monitor Cruise Disable
• P1589 [1] TCU Detected IPE Circuit Malfunction
• P1163 [1] P1163
• P0497 [1] Evaporative Emission System Low Purge Flow
• P0420 [3] Catalyst System Efficiency Below Threshold (Bank 1)
• P1420 [1] Air Pump Circuit Malfunction/ (AIR) System Bank 1
• P0706 [2] Transmission Range Sensor A Circuit Range/Performance
• P1706 [1] Reverse Engagement Error
• P1021 [1] P1021
• P1298 [1] Injector High Side Open - Bank 1
• P2000 [1] NOx Adsorber Efficiency Below Threshold Bank 1
• P0142 [1] 02 Sensor Circuit Malfunction (Bank 1 Sensor 3)