Isuzu F-series
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the ISUZU F-SERIES.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| ISUZU |
ISUZU VIN Decoder
Use the box here to look up VINs from ISUZU as well as other manufacturers
NHTSA Mandated Recalls
Recall R/2010/109 [UK]: Horn may not operate
Recall R/2011/106 [UK]: Seat belt may not retract
Recall R/2013/098 [UK]: Possibility of loss of control
Recall R/2013/126 [UK]: Fire may occur
Recall R/2014/006 [UK]: Vehicle may inadvertently move
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
- WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
- WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
- WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
- WB08-X-001H - EQUIPMENT: This bulletin provides instructions with regard to the isuzu commercial vehicle (cv) warranty parts center on the topics of parts retention, parts preparation for shipping, and administration. Note: effective june 1, 2021 dealers/service c
- WB18-X-001A - FUEL SYSTEM, GASOLINE: This bulletin provides shipping preparation and administration instructinos with regard to parts return requests from the isuzu technical assitance line (tal). The tal parts return request sytsem is used by isuzu commercial truck of americ
- IB18-X-002E - ENGINE (PWS): We ask you to call the tal so that we may obtain faster and more accurate quality information on failed engines and transmission assemblies and improve the reliability of oem and service replacement engine and transmission assemblies. For
- IB19-R-002A - EQUIPMENT: This bulletin applies to all isuzu vehicles equipped with rpo i4v mobileye this bulletin outlines the procedures for using the mobileye exchange program. This program must be used for any mobileye system repaired under warranty. A replac
- IB19-N-001B - ELECTRICAL SYSTEM: Isuzu commercial truck of america is pleased to announce the relaese of oem and fleet value (fv) elctrical wire connectors and separate terminal wires for certain isuzu n-series and f-series trucks. In some instances, the electrical connec
- IB07-X-003L - EQUIPMENT: The vehicle key has been improved in the above affected vehicles. The key design is more robust and the number of cuts in the key has been increased. As a result, important information is provided in this bulletin to assist dealers and cu
- IB19-X-002A - FORWARD COLLISION AVOIDANCE: Replacing the adhesive vehicle identification number (vin) labels located on the driver's side door jamb may be necessary when significant collision repairs have been performed or the labels have been otherwise damaged. Since these vin lab
- IB12-J-003E - EQUIPMENT: Proper installation of the fuel injector pipes into a long block assembly the fuel injection pipes should be installed onto the new long block assembly after first installing the common rail. When installing the fuel injection pipes, foll
- IB18-X-002C - POWER TRAIN: We ask you to call the tal so that we may obtainfaster and more accurate quality information on failed engines and trasmission assemblies and improve the reliability of oem and service replacement engine and transmission assemblies. For th
- SB20-H-001 - BRAKES (PWS): Vehicles produced prior to january 2, 2019 some customers may complain about an illuminated check engine light setting shortly after starting the engine. If the reason for the check engine light illuminating is dtc P0027, the most likely
- IB19-N-001A - ELECTRICAL SYSTEM: Isuzu commercial truck of america is pleased to announce the release of oem and fleet value (fv) electrical wire connectors and separate terminal wires for certain isuzu n-series and f-series trucks. In some instances, the electrical conne
- RP17V19117V32420 - EQUIPMENT: Dealer communication of mailed post card reminders to customers for recall 17v-191 and 17v-324
- IB19R002 - EQUIPMENT: For all isuzu vehicles equipped with rpo i4v mobileye this bulletin outlines the procedures for using the mobiley exchange program. This program must be used for any mobileye repaired under warranty. This program may also be used for mob
- IB19J001 - ENGINE AND ENGINE COOLING: The state of california has released the following statement: beginning january 1, 2020, compliance with the california air resources board's (carb) truck and bus regulation will be automatically verified by the california department of mo
- IB19R001 - ENGINE AND ENGINE COOLING: Isuzu provides optional engine block heaters and oil pan heaters which are designed to warm the engine coolant and engine oil enough during extreme cold temperatures to allow easy starting. Oil gets thicker (more viscous) as it gets colder
- IB17X002B - EQUIPMENT: Effective june 4th, 2019 dealers are no longer required to call the isuzu cv technical assistance center (tac) to provide detailed failure and diagnostic information prior to repairing 2018-2019my isuzu ftr vehicles. Warranty claims should
- IB19X004 - ENGINE AND ENGINE COOLING: California law requires that a proff of correction certificate ("poc certificate") be completed for every motor vehicle emissions campaign/recall (if any) that is applicable to a motor vehicle in order for that vehicle to be registered in t
- IB19K002 - EQUIPMENT ADAPTIVE/MOBILITY: Affects all isuzu vehicles equipped with aisin automatic transmissions teardown. Investigations of aisin remanufactured transmissions have identified a small possibility of water entering through the transmission fluid level indicator tube
- IB19X001 - EQUIPMENT: We are pleased to announce the launch of a website to promote the sale of isuzu essential and recommended tools powered by bosch. The new website launched march 11, 2019. Isuzu dealers will no longer be required to fax or email the order
- IB19E001 - SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY:HANGER,BRACKET: Some customers may complain abour a clunking noise coming from the front end typically heard when turning into an uneven road surface or while turning and hitting a bump. This clunking noise may be caused by the front leaf spring contactin
- IB19K001 - POWER TRAIN: The check trans light may illuminate in the affected vehicles without any apparent transmission concerns. The transmission control module (tcm) is programmed by allison to predict the need for transmission maintenance relating to the oil l
- WB18J001 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY: This bulletin describes certain additional requirements when submitting a warranty claim for radiator leaks (labor operation codes j3080 or j3100 and parts warranty) on 2018-2019my isuzu ftr vehicles
- SB18J002 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE): Some customers may experience an illuminated malfunction indicator light (mil) with dtc P0402 exhaust gas recirculation (egr) flow excessive set without an apparent cause. New calibrations for the engine control module (ecm) have been deve
- IB18X002B - POWER TRAIN: Important: effective june 1, 2018 ? The iqc process will be transferred to isuzu technical assistance. As of june 1, 2018, please contact the isuzu technical assistance line at 1-877-isuzucv (1-877-478-9828), prompt 3, prior to replacing en
- IB18X001A - EQUIPMENT ADAPTIVE/MOBILITY: Ida is a pilot diagnostic program which analyzes dtcs (currently 29) and provides quick and easy to understand repair solutions. Utilizing data captured during an isuzu mimamori ecu (health report) download and accessible from www.Isuzutruc
- IB17X002A - EQUIPMENT: Product teams continually seek valuable information for product quality and engineering improvements. For the new 2018 model year ftr, isuzu commercial truck of america, inc. (isuzu) will be strictly monitoring complete vehicle performance
- IB18X002A - POWER TRAIN: Important: effective june 1, 2018 ? The iqc process will be transferred to isuzu technical assistance. As of june 1, 2018, please contact the isuzu technical assistance line at 1-877-isuzucv (1-877-478-9828), prompt 3, prior to replacing en
- IB17X003A - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Aipdn is pleased to announce the availability of instrument clusters programmed with the vehicle?S mileage for 2011my to current isuzu n-series vehicles.
- IB17X004 - EQUIPMENT: In order to improve the quality of the original equipment manufacturer (oem) and service replacement engines and transmission assemblies, the isuzu quality center (iqc) was implemented to assist dealers whenever an isuzu diesel/gasoline eng
- IB17-L-001A - FUEL SYSTEM, DIESEL: During refueling, it is possible for water (and other contaminants) to be pumped into the fuel tank along with the diesel fuel. This can occur if a service station does not regularly inspect and clean its fuel tanks, or if a service station
- IB17-J-002 - ELECTRICAL SYSTEM: Whenever certain components are replaced, the ecm must acquire a new "maf sensor learned" value. This is to optimally adjust the ecm for variations in the intake duct or certain sensors. Perform the "maf sensor relearn procedure if any of
- IB16-J-002 - ENGINE (PWS): Isuzu motors limited has analyzed failed engines and determined that engine oil diluted with diesel fuel is a cause of some engine failures. If the engine oil level is high, the oil may be diluted with diesel fuel. This bulletin is being is
- IB09-X-001L - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : In order to improve the quality of the original equipment manufacturer (oem) and service replacement engines and transmission assemblies, the isuzu quality center (iqc) is being implemented to assist dealers whenever an isuzu diesel/gasol
- IB09-X-001K - ENGINE (PWS): In order to improve the quality of the original equipment manufacturer (oem) and service replacement engines and transmission assemblies, the isuzu quality center (iqc) was implemented to assist dealers whenever an isuzu diesel/gasoline eng
- B16-L-001 - FUEL SYSTEM, OTHER: The use of diesel fuel additives is not required or recommended under normal conditions. The filtering system is designed to block water and contaminants without the use of additives. However, some customers may desire to use fuel additives
- IB12-J-003C - ENGINE (PWS): Proper installation of the fuel injector pipes into a long block assembly. The fuel injection pipes should be installed onto the new long block assembly after first installing the common rail. When installing the fuel injection pipes, fol
- IB16-H-001 - BRAKES (PWS): Isuzu commercial truck of america is sending this bulletin to remind dealers to strictly follow the procedures set forth in the shop manuals when conducting brake inspections or brake repairs, including replacing brake pads, on isuzu trucks
- 9701C004 - ENGINE AND ENGINE COOLING:ENGINE: New replacement cylinder head gasket availability. *yc