Isuzu I-370 Extended Cab 2wd 2007

• Recall 67990 [USA]: This condition could cause the simultaneous loss of all brake lamps or cause all of the brake lamps to stay on continuously. both of these conditions could fail to warn others of the driver's intentions and could lead to a vehicle crash.
  Gm is recalling 185,903 model year 2004-2009 colorado, gmc model year 2009-2004 canyon, model year 2006 i-280, i-350, model year 2007-2008 i-290, and i-370, passenger vehicles originally sold in or currently registered in the states of alabama, arizona, florida, georgia, hawaii, louisiana, mississippi, nevada, new mexico, puerto rico, south carolina, texas, u.S. Virgin islands and utah. Some of these vehicles have a brake lamp switch that may not work as designed due to contamination in the switch.
  dealers will inspect and replace the necessary components as specified in the recall bulletin free of charge. Gm anticipates that parts will be available by june 2010. A special coverage for vehicles registered in all other states will be implemented in the same time frame. In the interim, owners who experience the failure can obtain a free repair, however they will be required to return when the new design part becomes available. Owners may contact chevrolet at 1-800-630-2438, gmc at 1-866-996-9463, isuzu at 1-800-255-6727 or at www.Gmownercenter.Com.
  gm recall no. 09049.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Code B2960 key code incorrect but valid. Which means a faulty ignition key cylinder. Security light flashes, engine cranks, fails to start. Have to wait 10 or more minutes to reset. Still fails to start. Wait another 10 or more minutes for reset. After more than 20 minutes, it starts, maybe. Isuzu motors does not supply its dealerships anymore with key cutting codes, ignition key cylinder parts, nor the software relearn procedures to resolve this at the local level. Chevy and gmc dealerships don't have the capability to be able to work on isuzu vehicles to cut keys or relearn the ignition to the body control module.

B2960 code. Key code incorrect but valid. Body control modual fails to sense the chipped key. Vehicle has failed to start on several occasions recently. Isuzu dealerships do not have capability to cut new keys or reprogram the bcm. Chevy and gmc dealerships with not service isuzu vehicles, even though they are general motors products.

Failed ignition switch, insert correct key into ignition switch, try to start, does not start due to failed ignition switch. Vehicle theft device does not sense the electronic chip in the key. Does not allow my truck to start. Local dealership can not cut new keys nor can they reprogram the ignition switch or the vehicle theft device since isuzu motor corporation does not supply them with and reprogram software or procedures.

My 2007 isuzu i 370 extended cab pickup truck has a serious issue with not starting. It has failed to start at least 7 times in less than 4 days. The dealership and isuzu motor corporation are clueless and to what is going on with it. I work as a truck mechanic, hooked up a diagnostic computer to it. Code is B2960, security system sensor valid but incorrect. This code is found under the body control module. I have the correct keys. I turn the key to accessory, wait to crank the engine for 15 seconds, try to start, and of course , fails to start. The ignition switch tells the security system to not to start the truck. Passlock security system light flashes for a minimum of 10 to 12 minutes, and has failed to start for longer than 30 minutes. This is the same recall that general motors is currently having with several of their models. But my truck was built through a coop between general motors and isuzu. But neither corporation will never recognize each others exsistence with any sort of recall. I can not go on with this issue. I have talked to the local isuzu dealership and isuzu motor corporation. I'm scared that this vehicle will soon stop working while i am driving, and cause a major accident. The 3 on-board computers retain codes. Therefore isuzu and the isuzu dealerships can not lie about not having and codes.

Insert correct key, try to start truck. Fails to start. Engine light comes on. Vehicle theft deterrent flashes on and of for 10 to 12 minutes. Then goes out. Turn key off, it may start, or it goes through another fail to start situation. Has failed to start 3 time conservatively 3 times while i'm at the gas station. Has never stopped on me while traveling down the road. This is the same recall that general motors has, but isuzu does not recognize their recalls.

I have been having issues with the theft deterrent since i bought my 2007 isuzu i-370. When i try to start my vehicle wherever i am the theft deterrent light on the dashboard lights up and i have to wait 10 minutes before i can start it. People that i talk to that have the same vehicle have the same problem that i have. This issue has plagued this model and the colorado's also. I am tired of having to go through this everyday. Something has to be done about this problem.

Common OBD-II Error Codes

• C0035 [1] Right Front Wheel Speed Sensor Supply (Subfault)
• C0040 [1] Brake Pedal Switch "A" (Subfault)
• P0300 [1] Random/Multiple Cylinder Misfire Detected
• P0171 [1] System too Lean (Bank 1)
• P0172 [1] System too Rich (Bank 1)
• P0174 [1] System too Lean (Bank 2)
• P1174 [1] Fuel Rail Sensor In-Range High Failure
• P1175 [1] ESO - Engine Shut Off Solenoid Fault
• P0757 [1] Shift Solenoid B Stuck On
• B2960 [3] B2960