Mack Cxn 2004

• Recall 87603 [USA]: The head lights may not operate properly which could result in intermittent or no headlight function. this could impair a driver's visibility, increasing the risk of a crash.
  Mack is recalling 34,269 my 1999-2005 cx and my 2004-2008 cxn trucks. The headlight switch may prematurely fail resulting in inoperative or intermittent headlights.
  dealers will replace the headlight switch. The recall began on february 27, 2009. Owners may contact mack at 1-800-528-6586.
  mack recall no. SC0342.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 72746 [USA]: A leak in the fuel injection line may spray fuel on the hot surfaces of the exhaust gas recirculation system, which could result in an engine fire.
  On certain trucks equipped with aset ac model engines, the engine as configured with an external exhaust gas recirculation system makes servicing the fuel injection lines difficult when using traditional tools. Therefore, it is possible for fuel leaks to develop when removing and installing the fuel injection lines.
  dealers will replace the fuel injection lines free of charge. Note: this recall supersedes a previous campaign conducted in 2006 (please see 06v392). The recall began on september 11, 2007, with subsequent mailings every six weeks until april 2008. Owners may contact mack at 800-528-6586.
  mack recall no. SC0324.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 37517 [USA]: This could potentially result in an engine fire.
  On certain trucks, a leak in the aset ac fuel injection line may spray fuel on the exhaust gas recirculation pipes that carry hot exhaust gases .
  mack has issued a stop work on this campaign under further notice (2-22-2007). The remedy does not adequately address the issue on all vehicles. Mack will re-release the recall in the near future. (please see nhtsa no. 07v159/mack recall no. Sco323 for vehicles that have had this repair already performed.) this recall has been superseded (please see 07v401/sC0324).
  mack trucks recall no. SC0317.Customers can also contact the national highway traffic safety administration?S vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 50966 [USA]: If the crossover bracket falls a crash may occur without prior notice.
  On certain trucks, the fuel line crossover bracket may prematurely fail and unexpectedly fall to the road. The location and size of the bracket draws a concern to the bracket being picked up and thrown by the drive axle wheels.
  dealers will replace the brackets free of charge. The recall began on august 20, 2006. Owners may contact mack trucks at 1-800-528-6586.
  customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 50757 [USA]: The brake cam journal may corrode which could lead to the brakes dragging. this could result in a vehicle fire.
  On certain vehicles, the brake cam tubes on the steer axle may not have been greased.
  dealers will remove the brake camshaft to inspect for corrosion. The brake camshaft will be replaced as required free of charge. The recall began on february 27, 2006. Owners may contact mack at 1-336-393-2233.
  mack recall no. SC0304.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 50763 [USA]: The brake cam journal may corrode which could lead to the brakes dragging. this could result in a vehicle fire.
  On certain vehicles. The brake cam tubes on the drive axle may not have been greased.
  dealers will remove the brake camshaft to inspect for corrosion. The brake camshaft will be replaced as required free of charge. The recall began on january 18, 2006. Owners may contact mack at 1-336-393-2233.
  mack recall no. SC0305.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 41733 [USA]: This could result in vibration or brake performance issues. braking capability would be diminished, increasing the risk of a crash.
  On certain trucks equipped with the fxl axle and meritor 16.5 x 5 brakes with dust shields, there may be interference between the dust shield mounting bolt and the knuckle on the front axle. As a result of the interference, the bolt joint between the wheel end and the knuckle may not meet the torque requirements.
  dealers will remove the hub and brake assembly to install a new dust shield free of charge. The recall began on august 17, 2005. Owners may contact mack trucks 610-709-2131.
  mack truck recall no. SC0293.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 55765 [USA]: Braking capability would be diminished, increasing the risk of a crash.
  On certain heavy duty class 8 trucks equipped with air suspension proprietary axles and adjustable lengh torque rods, an interference between the adjustable torque rod and the brake chamber on the left side of the chassis may exist. The spring brake chamber clamp ring could possibly be distorted over time resulting in loss of air, which could lead to the spring brake at the chamber being inadvertently applied.
  dealers will repair and replace the adjustable torque rod, with a fixed length torque rod, inspect and repair the brake chamber free of charge. The recall began on may 3, 2005. Owners may contact mack trucks at 610-709-2131.
  mack trucks recall no. SC0294.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 55186 [USA]: If the hose fails, fuel can be sprayed on the exhaust manifold, which could potentially lead to an engine compartment fire.
  On certain heavy duty class 8 diesel trucks equipped with aset ac engines, the location of the fuel inlet hose may result in overheating or abrasion of the hose, which may lead to a premature failure.
  dealers will repair and replace the fuel inlet hose free of charge. The recall began on february 14, 2005. Due to some quality and supply issues with parts to support this safety recall, owners may have been informed during april 2005,that the safety recall was on hold. These issues have now been resolved. For owners who have not had their vehicle(s) repaired, contact a mack parts and service center immediately to schedule an appointment to have your vehicle(s) repaired. Owners may contact mack trucks at 610-709-2131.
  mack trucks recall no. SC0292.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 2008456 [Canada]: Lights and instruments
  On certain vehicles, the headlamp switch may fail causing complete or intermittent loss of headlamp function. Should this occur during hours of darkness, it could result in a vehicle crash causing property damage, personal injury or death. Correction: dealers will replace the headlamp switch.

  Show Content

• Recall 2007278 [Canada]: Brakes
  On certain trucks, the engine configuration makes servicing fuel injection lines difficult when using traditional tools. It is possible for fuel leaks to develop following recall campaign 2006258 (mack sC0317) or when line removal is required to gain access to other engine components. Underhood fuel leakage could result in a vehicle fire. Correction: dealers will install an updated fuel injection line that offers better clamping surface when torqued. This will be done using specially designed tools to ensure correct torque is applied.

  Show Content

• Recall 2006187 [Canada]: Fuel supply
  On certain vehicles, the fuel line crossover bracket may fail. Such a failure could allow the bracket to fall from the vehicle and damage a drive axle tire. Correction: dealers will replace the bracket.

  Show Content

• Recall 2006258 [Canada]: Fuel supply
  On certain trucks, a leak in the fuel injection line may spray fuel on the exhaust gas recirculation (egr) pipes. The hot egr pipes could ignite the fuel, causing an underhood fire. Correction: dealers will inspect and, if required, replace the fuel injection lines. A protective sleeve will be installed over the lines. Note: recall cancelled, see tc 2007102

  Show Content

• Recall 2005009 [Canada]: Fuel supply
  On certain vehicles, the location of the fuel hose used on the aset ac engine may result in overheating and/or abrasion of the hose, which may lead to a premature failure. If the hose fails, fuel can be sprayed on the exhaust manifold, which could potentially lead to an engine compartment fire. Correction: dealers will replace the fuel inlet hose.

  Show Content

• Recall 2005097 [Canada]: Brakes
  On certain trucks, there may be interference between the dust shield mounting bolt and the knuckle on the front axle. As a result of the interference, the bolt joint between the wheel end and the knuckle may not meet the torque requirements. This could result in vibration or brake performance issues. Braking capability would not be possible, increasing the risk of a crash. Correction: dealers will remove the hub and brake assembly to install a new dust shield.

  Show Content

• Recall 2005117 [Canada]: Steering
  On certain vehicles, the steering gear mounting pads, which attach the steering gear to the frame rail, may fail prematurely. If this occurs, a loss of steering control could cause a crash. Correction: dealers will replace the steering gear.

  Show Content

• Recall 2005283 [Canada]: Brakes
  On certain vehicles, the brake cam tubes on the drive axle may not have been greased during vehicle assembly. As a result, the brake cam journal may corrode which may lead to the brakes dragging and could result in a vehicle fire. Correction: dealers will remove, inspect and service the brake camshaft.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.