2008 MACK CXPMack Cxp 2008

Complaint Information: Recalls, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall 71563 [USA]: There is a possibility that the pivot bolt can become loose without the driver's knowledge. when this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash.
    On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. An over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
    dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. The recall began on january 28, 2008. Owners may contact mack trucks at 1-800-528-6586.
    mack trucks recall no. SC0331.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  • Recall 2007339 [Canada]: Other
    On certain trucks, the fifth wheel hitch assembly's lever arm may have been incorrectly installed during the manufacturing process. The lever arm pivot bolt may have been over-tightened which could distort the pivot bolt spacer sleeve and prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. This could allow the towed unit to separate from the towing vehicle while underway, potentially causing a crash with injury or death. Correction: dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • CBR-2347 202402 - ELECTRICAL SYSTEM: Cbr - active "set park brake" message on drivers information display (did).
  • CBR-202 202402 - POWER TRAIN: Cbr - automated manual transmission ( amt ) flywheel pilot bearing wear on input shaft.
  • M-465-001 202311 - POWER TRAIN: Tsb: mack trucks now offer an improved hd inter-axle through shaft for the crd 125, 150, 180, and 200 family carriers. The new hd shaft went into production on january 23rd, 2023 for 2.54 - 3.50 axle ratios and april 1st, 2023 for 3.56 - 3.
  • M728-005A 202308 - SUSPENSION: Tsb: barksdale leveling valve, leak test
  • KC-474-Ver5 - POWER TRAIN: Cbr: diagnostic trouble code (dtc) P215A-64, fault code spn 84 fmi 19
  • KC-614-Ver4 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Cbr: ewarranty to uchp labor code ( scc code ) crossover, conversion information for use with campaigns ( fi, pi ) and recalls ( ec, sc ), location on trucks dealer portal ( tdp )
  • M-251-008 - ENGINE AND ENGINE COOLING: 2008 document reformated to be published as a tsb in impact. Intake mounting hardware.
  • M-652-002 - SUSPENSION: 2008 document reformated to be published as a tsb in impact. Torque rod interference.
  • M-265-002 - ENGINE AND ENGINE COOLING: Tsb-charge air cooler t-clamp install.
  • M-451-001 - SUSPENSION:FRONT: 2007 document reformatted to be published as a tsb in impact. Updated crossmember for improved clearance.
  • M-711-002 - STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS: 2008 document reformated to be published as a tsb in impact. Frame reinforcement plate.
  • M-711-001 - SUSPENSION:REAR: 2008 document reformatted to be published as a tsb in impact. Rear suspension repair.
  • KC-2112 - ENGINE AND ENGINE COOLING: Programming failure - chassis with cummins engine and an allison transmission
  • KC-2143 - VEHICLE SPEED CONTROL: (back office) - cruise control inoperative after updating software vecu5 without esp package (uesp).
  • KC-405 - POWER TRAIN: Warranty automated manual transmission ( amt, i-shift, mdrive ) control housing assembly; guidelines for filing a claim for chassis return visit with transmission issues after a repair requiring control housing removal and reinstallation -
  • KC-745 - POWER TRAIN: Automated manual transmission ( amt ) i-shift / mdrive - ribbon harness replacement - speed sensor bolts, possible fault codes P1058 - 21 or mid 130 pid 161 fmi 1
  • KC-750 - ENGINE AND ENGINE COOLING: Us10 emission engines - diagnostic trouble code ( dtc ) spn 1231 fmi 9 troubleshooting.
  • KC-663 - ENGINE AND ENGINE COOLING: Emcon (spark assist) engine aftertreatment system troubleshooting check sheet - us07 emissions
  • KC-653 - ENGINE AND ENGINE COOLING: Low oil pressure diagnostic process for 11 liter engines
  • KC-644 - ENGINE AND ENGINE COOLING: Manual compression test adapter for engines with stainless steel injector sleeves (conical tip injectors) - us07 and newer emissions, model year 2008 and newer
  • KC-630 - ENGINE AND ENGINE COOLING: Sensor and parameter value monitor - template parameter list for pre-obd (9-pin diagnostic connector) chassis in premium tech tool ( ptt ); regeneration and road test sensor monitor parameters - us07 and us10 emissions, model years 2008 to
  • KC-627 - EQUIPMENT: Premium tech tool ( ptt ) training materials and support tools
  • KC-2172 - ELECTRICAL SYSTEM: No start condition after over the air programing - vecu5 no start "safe state"
  • KC-2171 - ENGINE AND ENGINE COOLING: Temperature sensor troubleshooting guide - us10+obd13 and newer
  • KC-2170 - SUSPENSION: Electronically controlled suspension (ecs) losing air pressure
  • KC-2169 - ELECTRICAL SYSTEM: Low voltage disconnect (lvd), function description
  • KC-2165 - ENGINE AND ENGINE COOLING: Def pump troubleshooting guide - us10+obd13 and newer emissions
  • KC-2161 - ENGINE AND ENGINE COOLING: Def pump cycling periodically hours after key off
  • KC-2158 - ENGINE AND ENGINE COOLING: Selective catalytic reduction (scr) muffler troubleshooting guide - us10+obd13 and newer emissions
  • KC-2131 - ENGINE AND ENGINE COOLING: Use for new vehicles (us21+obd22 emissions) - intermittent diagnostic trouble codes U02A3, U029D, U029E
  • KC-2116 - ENGINE AND ENGINE COOLING: Nox sensor troubleshooting guide - us10+obd13 and newer emissions
  • KC-626 - POWER TRAIN: Mack chassis - vehicles equipped with an automated manual transmission model f ( amt-f, mdrive ), premium tech tool ( ptt ) gearbox calibration failure; gearbox calibration operation stops and fails at 33% when run with transmission removed
  • KC-633 - WHEELS: Mack chassis - front hub with unit-bearings ( unitized wheel bearings ), inspection information and guidelines - commonly model year 2008 and newer
  • KC-648 - UNKNOWN OR OTHER: Mack - pto pump speed calculator
  • KC-686 - ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC): (back office only) mack chassis - cruise control inoperative after disabling the electronic stability program (esp)
  • KC-698 - ENGINE AND ENGINE COOLING: Mack chassis - diesel exhaust fluid ( def ) system cleaning/flush after def pump failure or system contamination
  • KC-699 - ELECTRICAL SYSTEM: Mack chassis - bendix vendor configuration program ( vcp ) software download information
  • KC-714 - ENGINE AND ENGINE COOLING: Mack chassis - diagnostic trouble codes ( dtc's ) - P020113, P020213, P020313, P020413, P020513, P020613, cylinders 1 through 6 injector a open circuit
  • KC-593 - EQUIPMENT: V-mac - abs malfunction lamp on - ( eaton abs active code 17-10 / arvin meritor wabco active code 7-4 )
  • KC-529 - UNKNOWN OR OTHER: System date and time, information; diagnostic tool ( j-pro, premium tech tool ( ptt ) ) displays incorrect timestamp for diagnostic trouble code ( dtc ) / fault code occurrences, possible data link codes present - us07 and newer emissions,
  • KC-238 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: Mack chassis - where to find the body builder portal - body builder manual ( bbm ) information - us04 and newer emissions, model year 2008 and newer
  • KC-163 - FUEL SYSTEM, DIESEL: Diesel fuel information - acceptable biodiesel, fuel blend for summer and winter - us07 and newer emissions, model year 2008 and newer
  • KC-145 - POWER TRAIN: Automated manual transmission (amt) (spigot bearing) input shaft repair kit and shim kit, part number information, reference guide - us07 and newer emissions, model year 2008 and newer
  • KC-73 - EQUIPMENT: Mack chassis - disabling the driver id; removing the driver id prompt - us07 to us14+obd16 emissions, model years 2008 to 2017
  • KC-692 - ELECTRICAL SYSTEM: Lighting control module ( lcm ) replacement - refer to technical parts information ( tpi ) 364 - 034 control unit
  • KC-124 - POWER TRAIN: Automated manual transmission gearbox will not shift to high range after gearbox repair; mid 130 psid 24 fmi 1, P1072-92 unintentional disengagement of high range - us07 and newer emissions, model year 2008 and newer
  • FSB 491-032 - POWER TRAIN: Transmission oil cooler hose, replacement
  • K31822325 - EQUIPMENT ADAPTIVE/MOBILITY: Mack chassis - differential carrier models crd 125 and crd 150 - new differential axle seal installation tool; new tool required for new input and output seal installation
  • K15194127 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Mack chassis - fault code sid 158 fmi 0 logging in instrument cluster ( mid 140, ic ), no code description or diagnostic information
  • K72614548 - ELECTRICAL SYSTEM: Diagnostic trouble code ( dtc ) P02FA illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
  • K01050303 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Diagnostic trouble code ( dtc ) P0471 illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
  • K04342327 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Diagnostic trouble code ( dtc ) P0420 illuminating the malfunction indicator lamp (mil) - us17 (ghg17, common rail fuel system) chassis only
  • K58557784 - FUEL SYSTEM, GASOLINE: Fuel injector offset learning diagnostic trouble codes ( dtc ) / fault codes logged in engine control module ( ems ); possible rough / uneven idle - obd15 chassis
  • FSB-413-003 - POWER TRAIN:CLUTCH ASSEMBLY: Mack: on some trucks, more leg and knee room was provided for operator comfort due to air operated clutch assist system designed to reduce clutch pedal effort by 20% and clutch pedal travel by 2' (50.8mm). Model chu, ctp, cxp, cxu, gu. N
  • FSB-437-001 - POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER: Mack truck: the easy installation of allison transmission and preventing binding of torque converter pilot during thermal expansion cycle of normal operation by using high temperature molybdenum disulfide grease. *pe
  • FSB-233-004 - FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP: Mack truck: there is fuel leakage at tandem fuel pump. The replacement of fuel pump will not correct weep hole leakage of fluid leak. Chp, ctp, cxp, chu, cxu, gu, leu, mru, td, cmm, cmh models. *pe
  • FSB-491-029 - UNKNOWN OR OTHER: Mack trucks: there are cracks in a steel oil tube that can lead to leaking. *rm updated 2/21/12. *pe
  • FSB-214-024 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE: Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm
  • SB-262-008 - ENGINE AND ENGINE COOLING: Mack trucks: there is a new thermostat seal and cover to prevent coolant leakage. *rm
  • SB-214-024 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm
  • SB-313004 - POWER TRAIN:CLUTCH ASSEMBLY: Mack truck: revised air assist clutch cable. Effective 9/17/07, a revised air assist clutch cable (part no. 27rc410m) was implemented into production on cxu, chu, and gu model chassis. No model years listed. *pe
  • SB-214052 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Mack truck: exhaust manifolds with stainless steel seal rings-cxp and ctp models equipped with us04 emission compliant mp7 engines. To provide improved sealing at the exhaust manifold joints, a revised exhaust manifold assembly (part no.
  • SB-631002 - VISIBILITY:WINDSHIELD: Mack truck: windshield installation (rope-pull method)-cxu, chu, gu, cxp, ctp, cxn, chn, cx, ch, ct, cv and cl models. Mack trucks now uses a rope pull windshield glass installation method on current production conventional models. Thi
  • SB-635012 - EQUIPMENT:APPLIANCE:AIR CONDITIONER: Mack truck: fine particulate filter for hvac units-cxu, chu, gu, cxp and ctp models. A pleated fine particulate hvac filter (part no. 85112361) has been developed for the hvac units in certain models. No model years listed.
  • SB-313006 - POWER TRAIN:CLUTCH ASSEMBLY:BELL HOUSING: Mack truck: air assist clutch conversion. Air assist to non assist clutch cable conversion. The air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave
  • SB-262001 - STEERING:HYDRAULIC POWER ASSIST:PUMP: Mack truck: power steering pumps with metric fittings. Service replacement power steering pumps supplied through the mack parts system for mp7 and mp8 engines utilize metric threads at the high pressure and suction ports. No model years
  • TSB-517009 - POWER TRAIN:AXLE ASSEMBLY: Mack truck: broken longitudinal torque rod mounting stud in axle spring seat due to wing bracket interference. This includes the td model. No model years listed. *pe
  • SB-12-1043 - SUSPENSION:REAR: Mack truck: suspension crossmembers, primaax rear suspension. Models equipped with the hendrickson primaax rear air suspension may develop a crack in the radius of the lower end gusset. *pe
  • P-1672 - ENGINE AND ENGINE COOLING:ENGINE: Exhaust rocker arm, combustion sealing washer and unit injector yoke replacement. *pe

OBD-II Error Codes

Common OBD Error codes specific to this vehicle.

  • C0331 [1] Magnet / TCS meter # 1 left rear - signal out of range / performance
  • P215A [1] Vehicle Speed - Wheel Speed Correlation
  • P1058 [1] P1058
  • U029D [1] Lost Communication With NOX Sensor "A"
  • U029E [1] Lost Communication With NOX Sensor "B"
  • U02A3 [1] U02A3
  • P0201 [1] Injector Circuit Malfunction - Cylinder 1
  • P0202 [1] Injector Circuit Malfunction - Cylinder 2
  • P0203 [1] Injector Circuit Malfunction - Cylinder 3
  • P0204 [1] Injector Circuit Malfunction - Cylinder 4
  • P0205 [1] Injector Circuit Malfunction - Cylinder 5
  • P0206 [1] Injector Circuit Malfunction - Cylinder 6
  • P1072 [1] P1072
  • P02FA [1] Diesel Intake Air Flow Position Sensor Minimum/Maximum Stop Performance
  • P0471 [1] Exhaust Pressure Sensor "A" Circuit Range/Performance
  • P0420 [1] Catalyst System Efficiency Below Threshold (Bank 1)
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.